• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.126-134
• /
• 2020

유체 저장 구조물은 지진 시 유체의 출렁임에 의해 동수압이 발생한다. 이 때, 유체의 동수압은 지진의 강도뿐만 아니라 유체 자유수면의 출렁임 높이(sloshing height)에 의해서도 변화한다. 이러한 하중 변화에 영향을 미치는 인자로는 지진파의 형상, 최대지진강도, 유체 저장구조물의 크기, 구조물의 폭, 유체의 높이 등이 있으며, 본 연구에서는 유체높이와 구조물 폭의 비가 유체의 출렁임 특성에 미치는 영향을 규명하고자 한다. 이를 위하여 구조물의 폭이 500mm인 수조에 구조물의 전체 높이 대비 50%인 200mm와 35%인 140mm의 유체를 담아 실지진파를 적용시켜 유체 자유수면의 출렁임 높이를 측정하였다. 또한 수치해석기법 중 하나인 SPH기법을 통하여 실험과 해석의 유사성을 검증하였다. 실험과 해석의 비교를 통하여 유체의 자유 수면이 유사한 형상을 나타냄을 확인하였으며, 이를 바탕으로 SPH기법을 적용하여 유체높이와 구조물 폭의 비를 다양하게 변화시키면서 유체 자유수면의 출렁임 형상을 분석하였다. 이상의 결과를 바탕으로 지진시 유체 자유수면의 최대 높이 및 최소높이를 예측할 수 있는 식을 제안하였으며, 제안식에 의해 예측된 유체 자유수면의 최대 높이 및 최소 높이의 오차는 최대 3% 이내임을 확인하였다.

• International Journal of Ocean System Engineering
• /
• 제2권1호
• /
• pp.32-36
• /
• 2012

This paper presents a comparison of potential and viscous computational codes for the water entry problem. A po-tential code was developed which adopted the boundary element method to solve the problem. A nonlinear free surface boundary condition was integrated to find new locations of free surface. The dynamic boundary condition was simplified by taking constant potential values for every time steps. The simplified dynamic boundary condition was applied in the new position of the free surface not at the mean level, which is the usual practice for linearized theory. The commercial code FLUENT was used to solve the water entry problem from the viscosity point of view. The movement of the air-liquid interface is traced by distribution of the volume fraction of water in a computational cell. The pressure coefficients were compared with each other, while experimental results published by other researchers were also examined. The characteristics of each method were discussed to clarify merits and limitations when they were applied to the water entry problems.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.58-66
• /
• 2014

Numerical simulations for the flows containing free surface remain difficult problems because the drastic differences of physical properties of water and air, The difference of densities makes the solution instable in particular. For the stabilities of the solutions, the most typical methods to simulate free surface flows, such as Volume Of Fluid(VOF) and Level-Set(LS) methods, impose transient zones where the physical prosperities are continuously distributed. The thickness of the transient zone is the source of the numerical errors. The other side, marker-density method does not use such a transient zone. In the traditional marker-density method, however, the air velocities of free surface cells are extrapolated from the water velocity, and the pressures on the free surface are extrapolated from the air pressures for the stability of the solution. In this study, the marker-density method is modified for the decrease of such numerical errors. That is, the pressure on the free surface is determined to coincide with the pressure gradient terms of the governing equations, and the velocity of free surface cells are calculated with the governing equations. Two-dimensional steady spilling breakers behind of a submersed hydrofoil and three-dimensional spilling breaker near a wedge shaped ship model are simulated using INHAWAVE-II including the modified marker-density(MMD) method. The results are compared with the results of Fluent V6.3 including VOF method and several published research results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.607-612
• /
• 2001

Based on the flow characteristics around a piercing cylinder, a free surface-flow velocitmetry which can be used in extremely harsh environment such as molten steel flow was developed. The velocimetry is consisted of finite length cylinder, load detecting elastic plate, electric signal transducer and data acquisition H/W and S/W. Using such a velocimetry, two velocity measurement schemes were established which one is flow resistance detecting scheme and the other is Karman Vortex frequency detecting scheme. For calibration of each scheme, realistic flow water model was used and in followings, detailed calibration processes were explained.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1989년도 수공학논총 제31권
• /
• pp.145-152
• /
• 1989

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.96-104
• /
• 1996

Hamilton's principle is used to derive Euler-Lagrange equations for free surface flow problems of incompressible ideal fluid. The velocity field is chosen to satisfy the continuity equation a priori. This approach results in a hierarchial set of governing equations consist of two evolution equations with respect to two canonical variables and corresponding boundary value problems. The free surface elevation and the Lagrange's multiplier are the canonical variables in Hamilton's sense. This Lagrange's multiplier is a velocity potential defined on the free surface. Energy is conserved as a consequence of the Hamiltonian structure. These equations can be applied to waves in water of finite depth including generalization of Hamilton's equations given by Miles and Salmon.

• Carbon letters
• /
• 제1권1호
• /
• pp.1-5
• /
• 2000

The effect of surface free energy on the positive temperature coefficient (PTC) of carbon black/thermoplastic resin composites was investigated. The thermoplastic resins such as EVA, LDPE, LLDPE and HDPE were used with the addition of 30 wt.% of the carbon black. The surface free energy of the composites was studied in the context of two-liquid contact angle measurements, i.e., deionized water and diiodomethane. It was observed that the resistivity on PTC composites Was greatly increased near the crystalline melting temperature, due to the thermal expansion of polymeric matrix. From the experimental results, it was proposed that the decrease of surface free energy induced by interactions between carbon black surfaces and polymer chains is an important factor to the fabrication of a PTC composite made of carbon black and polymeric matrix.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.11-20
• /
• 2003

In this paper, the high-order spectral/boundary-element method is developed to calculate the 3-dimensional water waves generated by a submerged body. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated Tn time-domain. Three-dimensional free-surface flows generated by a submerged sphere which is moving under the free-surface are calculated. Through example calculations, nonlinear effects on free-surface profiles and hydrodynamic forces are shown. Comparisons with others' results show good agreements.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.228-230
• /
• 2009

The moment-of-fluid (MOF) method is a new volume-tracking method that accurately treats evolving material interfaces. Based on the moment data (volume and centroid) for each material, the material interfaces are reconstructed with second-order spatial accuracy in a strictly conservative manner. The MOF method is coupled with a stabilized finite element incompressible Navier-Stokes solver for two fluids, namely water and air. The effectiveness of the MOF method is demonstrated with a free-surface dam-break problem.

• 한국수자원학회논문집
• /
• 제50권5호
• /
• pp.289-302
• /
• 2017

발산형 바닥 경사 생성항(DFB, Divergence Form for Bed slope source term)을 엄밀하게 유도하였으며, DFB 중에서 격자의 변에서 평균 수심을 이용하는 mDFB의 오차를 명백하게 입증하였다. 또한, DFB 기법은 바닥 경사 생성항에 대해 정확한 방법임을 밝혔다. 완전히 잠기기 않은 격자에 대한 기존의 체적-수심 관계의 오류를 수정하였으며, C-특성의 충족을 위해 완전히 잠기지 않은 변에 대한 처리가 필요함을 검토하였다. 이 연구를 통해 근사 Riemann 해법으로 천수방정식을 해석할 때 보다 정확한 수단을 제공할 수 있을 것으로 기대한다.