• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.118-131
• /
• 1991

자유수면 근처에서의 박리유동 현상을 수치 시뮬레이션 방법과 유선 가시화 시험 방법으로 연구하였다. 수치 시뮬레이션은 물체표면에서 유기되고 확산(diffusion) 및 대류(convection)에 의해 유동중으로 박리되어 방출되는 보오티시티(vorticity)를 다수의 보오텍스로 치환하여 유동의 변화와 유체력을 구하는 보오텍스블럽 법을 사용하여 수행하였다. 이 방법으로 대규모의 와류의 생성 및 변화를 추정할 수 있으며 또한 자유수면과 와류유동의 상호간섭현상 그리고 동 유체력 등을 추정할 수 있었다. 유선 가시화 시험은 해사기술연구소의 공동수조에서 수행하였으며, 직류 전원에 의해 얻어진 수소기포를 가시화 입자로 이용하였다. 조명장치는 할로겐 램프를 이용하였고, 연속사진을 가시화의 결과로 사용하였다. 또한 자유수면의 시간적 공간적 변화를 파고계를 이용하여 계측하고 이로부터 와류유동의 변화 주기를 추정하였다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.645-652
• /
• 1994

The leading edge of a turbine blade was simulated as a circular cylindrical surface. The effect of free-stream turbulence on the mass transfer upstream of the injectionhole has been investigated experimentally. The effects of injection location, blowing ratio on the Sherwood number distribution were examined as well. The mass transfer coefficients were measured by a naphthalene sublimation technique. The free-stream Reynolds number based on the cylinder diameter is 53,000. Other conditions investigated are: free-stream turbulence intensities of 3.9% and 8.0%, injection locations of $40^{\circ}$, $50^{\circ}$, and $60^{\circ}$ from the front stagnation point of the cylinder, and blowing ratios of 0.5 and 1.0. The role of the horseshoe vortex formed upstream edge of the injected jet is dicussed in detail. When the blowing ratio is unity, and the coolant jet is injected at $40^{\circ}$, the mass transfer upstream of the jet is not affected by the coolant jet at all. On the other hand, when the injection hole is located beyond $50^{\circ}$, the mass transfer upstream edge of the injection hole suddenly increases due to the formation of the horseshoe vortex, but it dereases as the free-stream turbulence intensity increases because the strength of the horseshoe vortex structure becomes weakened. The role of the horseshoe vortex is clearly evidenced by placing a rigid rod at the injection hole instead of issuing the jet. In the case of the rigid rod, the spanwise Sherwood number upstream of the injection hole is much larger due to the intense influence of the horseshoe vortex.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.40-43
• /
• 2004

The effects of free surface on wake behind a rotating propeller were investigated experimentally in a circulating water channel with the variation of water depth. Instantaneous velocity fields were measured using two-frame PIV technique at tow different blade phases and ensemble-averaged to investigate the phase-averaged flow structure in the wake region. For an isolated propeller, the flow behind the propeller is influenced by the propeller rotation and the free surface. The phase-averaged mean velocity fields show that the potential wake and the viscous wake are formed by the boundary layers developed on the blade surfaces. The interaction between the tip vortices and the slipstream causes the oscillating trajectory of tip vortices. Tip vortices are generated periodically and the slipstream contracts in the near-wake region. The presence of free surface affects the wake structure largely, when the water depth is less than 0.6D. The free surface modifies the vortex structure, especially the tip and trailing vortices and flow structure in slipstreams of the propeller wake behind X/D = 0.3.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.29-40
• /
• 1993

본 연구는 정수면으로 부터 얕게 잠겨 항주하는 3차원 수중익에 의한 비선형 조파현상의 특성규명을 위한 기초연구로서 수중익이 예인수조안에서 일정속도로 항주할 때 자유표면에 발생하는 비선형 파형의 특성과 수중익에 작용하는 유체력을 계산하기 위한 수치해법의 개발을 목적으로 하였다. 수치해법으로는 변분원리에 기초한 유한요소법올 사용하였으며 수중익 근처에서는 비선형 자유표면조건을 엄밀하게 만족시켰고 수중익으로 부터 충분히 떨어진 영역에서는 종래의 선형화된 자유표면 경계조건을 만족시켰다. 수치해법의 계산효율을 높이기 위하여 비선형영역과 선형영역 사이에 인위적인 비선형-선형 완충영역을 도입하여 계산영역을 크게 줄였다. 수중익을 간단한 직사각형 보오텍스계로 표현하여 유속과 몰수길이, 보오텍스의 세기 및 분포의 변화에 따른 비선형 파형의 특성을 조사하였으며 특히 자유 보오텍스선이 비선형 파형에 미치는 영향을 파악하였다. 파동에 의하며 수중익에 유기되는 속도성분들의 크기 및 분포, 양력 및 유기항력에 대한 계산을 수행하여 자유표면의 비선형성에 의한 영향을 규명하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.26-29
• /
• 2004

In this paper, we report the numerical and experimental solutions of the dynamic characteristics of a vortex ring in a circular cylinder generated by impinging a fluid blob from a hole on the bottom wall of the cylinder. We managed to visualize successfully the flow pattern shown on the vertical and horizontal planes by using a specially designed optical apparatus. Results of three-dimensional computation for the flow are shown to be in a satisfactory agreement with the experimental ones. We also report the experimental results which show a breaking of the axi-symmetric pattern after the vortex touches the free surface.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.592-595
• /
• 2011

A numerical investigation on a suction vortices, free vortices and subsurface vortices behavior in the model sump system with multi-intakes is performed A test model sump and piping system were designed based on Froude similitude for the prototype of the recommended structure layout by HI-9.B Standard for Pump Intake Design of the Hydraulic Institute. A numerical analysis of three dimensional multiphase flows through the model sump is performed by using the finite volume method of the CFX code with multi-block structured grid systems. A ${\kappa}-{\omega]$ ShearStressTransportturbulencemodelandthe Rayleigh-Plesset cavitation model are used for solving turbulence cavitating flow. From the numerical analysis, several types of vortices are reproduced and their formation, growing shedding and detailed vortex structures are investigated. To reduce abnormal vortices, an anti-vortex device is considered and its effect is investigated and discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.247-252
• /
• 2001

The flow around free end of a finite circular cylinder(FC) embedded in an atmospheric boundary layer has been investigated experimentally. The experiments were carried out in a closed-return type subsonic wind tunnel with varying aspect ratio of the finite cylinder mounted vertically on a flat plate. The wake structures behind a 2-D cylinder and a finite cylinder located in a uniform flow were also measured for comparison. Reynolds number based on the cylinder diameter was about Re=20,000. A hot-wire anemometer was employed to measure the wake velocity and the mean pressure distributions on the cylinder surface were also measured. The flow past the FC free end shows a complicated three-dimensional wake structure and flow phenomenon is quite different from that of 2-D cylinder. The three-dimensional flow structure was attributed to the downwashing counter rotating vortices separated from the FC free end. As the FC aspect ratio decreases, the vortex shedding frequency is decreased and the vortex formation length is increased compared to that of 2-D cylinder. Due to the descending counter-rotating twin-vortex, in the region near the FC free end, regular vortex shedding from the cylinder is suppressed and the vortex formation region is hardly established. In the wake center region, the mean velocity for the FC located in atmospheric boundary layer has large velocity deficit, compared to that of uniform flow.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.16-21
• /
• 2013

The flow around a circular cylinder advancing beneath the free surface is numerically investigated using a VOF method. The simulations cover Froude numbers in the range of 0.2~0.6 and gap ratios (h/d) in the range of 0.1~2.0, where h is the distance from the free surface to a cylinder, and d is the diameter of a cylinder at Reynolds number 180. It is observed that the vortex suppression effect and surface deformation increase as the gap ratio decreases or the Froude number increases. The most important results of the present study are as follows. The proximity of the free surface causes an initial increase in the Strouhal number and drag coefficient, and the maximum Strouhal number and drag coefficient occur in the range of 0.5~0.7. However, this trend reverses as the gap ratio becomes small, and the lift coefficient increases downward as the gap ratio decreases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.607-612
• /
• 2001

Based on the flow characteristics around a piercing cylinder, a free surface-flow velocitmetry which can be used in extremely harsh environment such as molten steel flow was developed. The velocimetry is consisted of finite length cylinder, load detecting elastic plate, electric signal transducer and data acquisition H/W and S/W. Using such a velocimetry, two velocity measurement schemes were established which one is flow resistance detecting scheme and the other is Karman Vortex frequency detecting scheme. For calibration of each scheme, realistic flow water model was used and in followings, detailed calibration processes were explained.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.95-101
• /
• 2002

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a sin91e pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found within a sump of pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface due to different clearances from back-wall to vertical intake pipe with bell mouse and without. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.