• The monthly packaging world
• /
• s.319
• /
• pp.48-58
• /
• 2019

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.46-51
• /
• 2011

High-rise buildings are widely being constructed in the Middle-East, South-East, and East Asia. These buildings are usually willing to stand for the landmark of the region and, therefore, exhibit some extraordinary features such as super-tall height, elevation set-backs, overhangs, or free-form exterior surface, all of which makes the construction difficult, complex, and even unsafe at some construction stages. In addition to the elaborately planned construction sequence, prediction and monitoring of building's movement during construction and after completion are required for precise and safe construction. This is often called the Building Movement Control during construction. This study describes Building Movement Control of the KLCC Tower, a 58-story office building currently being built right next to the famous PETRONAS Twin Towers. The main items of the Building Movement Control for the KLCC Tower are axial shortening and verticality. Preliminary prediction of these items are already carried out by the structural design team but more accurate prediction based on construction stage analysis and combined with time-dependent material testing, field monitoring, and site survey is done by the main contractor. As of September 2010, the Tower is under construction at level 30, where the plan abruptly changes from rectangle to triangle. Findings and troubleshooting until the current construction stage are explained in detail and implementations are suggested for future applications.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.357-364
• /
• 2012

For the resistance of the closed intellectual property license from the Free Software Movement. It's free and also can adapt have been widely used. Software for the resistance of the closed intellectual property rights have been promoted by the free software movement. Implementation of the proposed changes in the license that anyone can freely use the software and adapt open source software is widely used. The product of open source software can reduce development time and cost. Many people who use it will improve, verification and developed. However, indiscriminate use of these advantages, as well as the risk of dispute is high. This study is analyzed open source software dispute cases for piracy protection and will show duly open source software available to users by user environment.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.127-137
• /
• 2011

Objective: The aim of the study was to compare the opening and protrusive mandibular movements between Class I and Class II malocclusions in healthy adolescents by clinical and axiographic evaluations. Methods: Mechanical axiography was performed on non-orthodontically treated, temporomandibular disorder (TMD)-free adolescents (12 - 16 years) with Class I (n = 38, 16 boys, 22 girls) or Class II (n = 40, 19 boys, 21 girls) malocclusion. Opening and protrusive movements were measured clinically and axiographically. Intergroup comparisons were evaluated by t-tests. Results: In opening movement, the maximum clinical opening capacity was significantly different (p ${\leq}$ 0.05) between the groups. In protrusive movement, the Class II group had significantly greater maximum clinical protrusion (p < 0.001) and maximum axiographic protrusive length (p < 0.01) than the Class I group. No significant difference in the other opening and protrusive axiographic measurements was observed. Conclusions: TMD-free adolescents with Class II malocclusion have increased protrusive capacity compared with TMD-free adolescents with Class I malocclusion; however, the detected differences could be normal variations during adolescence.

• Journal of Ship and Ocean Technology
• /
• v.6 no.2
• /
• pp.37-50
• /
• 2002

In the present numerical simulation of viscous free surface flow around a ship, two-fluids in-compressible Reynolds-averaged Navier-Stokes equations with the standard $\textsc{k}-\varepsilon$turbulence model are discretized on a regular grid by using a finite volume method. A local level-set method is introduced for capturing the free surface movement and the influence of the viscous layer and dynamic boundary condition of the free surface are implicitly considered. Partial differential equations in the level-set method are discretized with second order ENO scheme and explicit Euler scheme in the space and time integration, respectively. The computational results for the Series-60 model with $C_B=0.6$ show a good agreement with the experimental data, but more validation studies for commercial complicated hull forms are necessary.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.271-279
• /
• 2020

Squats and lunges are important exercises for strengthening the trunk and lower body among various free weight exercises. It should be achieved safe and effective excise through establishing of theoretical basis for exercise posture and standard movement. Therefore, it's necessary to develop the exercise model in order to prepare the scientific countermeasures for the prevent injuries and error movement through optimal exercise movement. For this purpose, it is effective to use appropriate instruments for motion compensation according to the optical motion and error motion. In this paper, we develop a motion model analysis system based on dynamic motion through the four-point load cell for dynamic motion analysis. Proposed analytical method, the optimal and the error motion numerical data is obtained through the dynamic motion analysis. And we verified that dynamic movement is simplified to establish the motion modeling according to the classification motion and the numerical quantification data for analyzing.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.318-325
• /
• 2019

NREX, an upper limb exoskeleton robot, was developed at the National Rehabilitation Center to assist in the upper limb movements of subjects with weak muscular strength and control ability of the upper limbs, such as those with hemiplegia. For the free movement of the shoulder of the existing NREX, three passive joints were added, which improved its wearability. For the flexion/extension movement and internal/external rotation movement of the shoulder of the robot, the ball lock pin is used to fix or rotate the passive joint. The force and torque between a human and a robot were measured and analyzed in a reaching movement for four targets using a six-axis force/torque sensor for 20 able-bodied subjects. The addition of two passive joints to allow the user to rotate the shoulder can confirm that the average force of the upper limb must be 31.6% less and the torque must be 48.9% less to perform the movement related to the axis of rotation.

• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2024

In this study, an AI-based algorithm was developed to prevent image quality deterioration and reading errors due to patient movement in PET/CT examinations that use radioisotopes in medical institutions to test cancer and other diseases. Using the Mothion Free software developed using, we checked the degree of correction of movement due to breathing, evaluated its usefulness, and conducted a study for clinical application. The experimental method was to use an RPM Phantom to inject the radioisotope 18F-FDG into a vacuum vial and a sphere of a NEMA IEC body Phantom of different sizes, and to produce images by directing the movement of the radioisotope into a moving lesion during respiration. The vacuum vial had different degrees of movement at different positions, and the spheres of the NEMA IEC body Phantom of different sizes produced different sizes of lesions. Through the acquired images, the lesion volume, maximum SUV, and average SUV were each measured to quantitatively evaluate the degree of motion correction by Motion Free. The average SUV of vacuum vial A, with a large degree of movement, was reduced by 23.36 %, and the error rate of vacuum vial B, with a small degree of movement, was reduced by 29.3 %. The average SUV error rate at the sphere 37mm and 22mm of the NEMA IEC body Phantom was reduced by 29.3 % and 26.51 %, respectively. The average error rate of the four measurements from which the error rate was calculated decreased by 30.03 %, indicating a more accurate average SUV value. In this study, only two-dimensional movements could be produced, so in order to obtain more accurate data, a Phantom that can embody the actual breathing movement of the human body was used, and if the diversity of the range of movement was configured, a more accurate evaluation of usability could be made.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.21-22
• /
• 2023

In order to manufacture high-quality free-form concrete panel (FCP), it is necessary to analyze the limitations of free-form silicone mold (FSM) and conduct technology development research. Currently, the FSM used in FCP manufacture is classified into a side silicon mold(SSM) and a lower silicon mold(LSM). In this study, the limitations of each silicon mold were analyzed and solutions were proposed. In the case of side silicon mold, there is a limit to cannot supporting the side pressure of concrete. Therefore, a mold stacking method was proposed, and at the same time, a process of correcting the movement value of the rod was proposed. In the case of the lower silicon mold, there is a limit to completely implementing the design shape. Therefore, a real-time scanning method and a process of displaying FCP shape coordinates were proposed. The results of this study are expected to be used as basic data for manufacturing high-quality FCP.

• Korean Journal of Organic Agriculture
• /
• v.12 no.1
• /
• pp.67-80
• /
• 2004

Farm economy is getting worse because of the free trade trends in agriculture sector and unreasonable application of market economy principles to agricultural products. And The worldwide issues of environmental pollution as well as want of food, water and energy make human future be anxious. In addition, consumers raise questions in argument about safety of foods produced by traditional farming or imported. So I propose the urban-rural living community movement(URLCM) as an alternative plan for sustainable domestic agriculture. URLCM based on environmentally friendly agriculture and community consciousness will be able to solve many of present issues on agriculture and rural society through incessant interchanges between urban and rural community. This URLCM has to be basically founded on principles of symbiosis-coexistence and life circulation. So those that have to be driven forward arc organizing producers and consumer cooperatives, making environmentally friendly rural region and products, combining with consumer cooperatives, training the participants and so forth.