• 약학회지
• /
• 제32권4호
• /
• pp.287-293
• /
• 1988

Oxygen free radical have recently been found to mediate cell injury after ischemia in the kidney. The purpose of our study was to determine whether selenium had an effect on damge mediated by oxygen free radical in inorganic mercury induced renal failure, toxic model of renal failure. Toxic renal failure model was produced by subcutaneous injection of mercuric chloride (4mg/kg) once a day for 7 consecutive days. In additionally, coadministration of sodium selenite (1mg/kg) was performed by the same condition. As a consequence of this study, we were able to detect partially unequivocal role of selenium as below dipicted. The combination of sodium selenite showed that markedly inhibited production of superoxide radical in mercuric chloride alone. On the other hand, combined sodium selenite was unable to enhance against significantly lowered superoxide dismutase activity after mercuric chloride insult. However, simultaneous administration of sodium selenite was inclined to induce mitochondrial superoxide dismutase and catalase.

• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.171-176
• /
• 2009

The chloride threshold level (CTL) in mixed concrete containing, ordinary Portland cement (OPC), pulverized fuel ash (PFA) ground granulated blast furnace slag (GGBS), and silica fume (SF) is important for study on corrosion of reinforced concrete structures. The CTL is defined as a critical content of chloride at the steel depth of the steel which causes the breakdown of the passive film. The criterion of the CTL represented by total chloride content has been used due to convenience and practicality. In order to demonstrate a relationship between the CTL by total chloride content and the CTL by free chloride content, corrosion test and chloride binding capacity test were carried out. In corrosion test, Mortar specimens were cast using OPC, PFA, GGBS and SF, chlorides were admixed ranging 0.0, 0.2, 0.4, 0.8, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binder. All specimens were cured 28 days, and then the corrosion rate was measured by the Tafel's extrapolation method. In chloride binding capacity, paste specimens were casting using OPC, PFA, GGBS and SF, chlorides were admixed ranging 0.1, 0.2, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binders. At 28days, solution mixed with the powder of ground specimens was used to measure binding capacity. All specimens of both experiments were wrapped in polythene film to avoid leaching out of chloride and hydroxyl ions. As a result, the CTL by total chloride content ranged from 0.36-1.44% by weight of binders and the CTL by free chloride content ranged from 0.14-0.96%. Accordingly, the difference was ranging, from 0.22 to 0.48% by weight of binder. The order of difference for binder is OPC > 10% SF > 30% PFA > 60% GGBS.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.89-94
• /
• 2004

Most reinforcements in concrete are constructed by steel. Corrosion of reinforcement is the main cause of damage and early failure of reinforced concrete structures. The corrosion is mainly professed by the chloride ingress. In general, chloride in concrete can be discriminated by two components, total chloride and fire chloride. This paper provides a testing method on the coefficient of chloride diffusion in concrete and the relationship between total chloride and free chloride in concrete for the composition of predicting model on diffusion rate of chloride. In order to complete this predicting model, this study will use chloride penetration characteristic, diffusion coefficient and experiment of color change on silver nitrate solution. This predicting model is going to help that grasp special quality on salt content inclusion of concrete structure that is exposed in chloride environment. Accurate predicting model can be effectively used not only in selecting of repair time but also in preventing from various deteriorations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.699-704
• /
• 2003

Corrosion of reforcement is the main cause of damage and early failure of reinforced concrete structures. The corrosion is mainly progressed by the chloride ingress. In this paper, an experimental study is executed to investigate the effect of concrete properties and testing method on the coefficient of chloride diffusion. Also, it is compared that the relationship between total chloride and free chloride in concrete. According to this experiment results, w/c ratio and testing method effect on chloride diffusion coefficient of concrete. As w/c ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different value, respectively. Also, the content of free chloride in 7days curing concrete is increased as w/c ratio is increased.

• 전기화학회지
• /
• 제5권4호
• /
• pp.178-182
• /
• 2002

The electrochemical behavior of binder-free carbon anode, comprising of only artificial and natural graphite (AG and NG) particles, for intercalation and deintercalation of lithium ion $(Li^+)$ in aluminum chloride (AICI_3)-I-ethyl­3-methylimidazolium chloride (EMIC)-lithium chloride (LiCl)-thionyl chloride $(SOCI_2)$ room-temperature molten salt (RTMS) was studied. Binder-free carbon electrodes were fabricated using electrophoretic deposition (EPD) method. The binder-free carbon anodes provided a relatively flat charge and discharge potentials $(0\;to\;0.2V\;vs.\;Li/Li^+)$ and current capabilities $(250-340mAh{\cdot}g^{-1})$ for the intercalation and deintercalation of $Li^+$. Stability of the binder-free carbon anodes for intercalation and deintercalation of 50 cycles was confirmed.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4387-4391
• /
• 2011

The kinetic studies on the pyridinolysis of diisopropyl thiophosphinic chloride have been carried out in acetonitrile at $55.0^{\circ}C$. The free energy correlations for substituent X variations in the X-pyridines are biphasic concave upwards with a break point at X = 3-Ph. A concerted SN2 mechanism is proposed with a change of the attacking direction of the X-pyridine from a frontside attack for the strongly basic pyridines to a backside attack for the weakly basic pyridines. The factors to determine the rates and thio effects on the rates for the pyridinolyses of thiophophinic chloride, chlorothiophosphate, phosphinic chloride, phosphonochloridothioate, and chlorophosphate systems are briefly reviewed on the basis of the magnitude of the positive charge of the reaction center P atom and steric effects of the two ligands.

• 한국자원식물학회지
• /
• 제12권2호
• /
• pp.166-169
• /
• 1999

본 실험은 볍씨에 염화망간의 농도를 2500, 3500 및 4,500ppm을 처리하여 벼의 초기생육에 대한 생육반응, 엽록소 함량, 유리 proline 및 SOD활성변화를 자포니카형인 일품벼를 실험재료로하여 실험한 결과를 요약하면 다음과 같다. 1. 근장은 무처리보다 망간농도 4,500ppm에서는 0.3cm로 망간농도가 증가할수록 뿌리 생장이 억제되었다. 2. 발아율은 망간농도 3,500ppm에서 68%였으나 망간농도 4,500ppm에서 는 43%로 가장 낮았다. 3, 엽록소 함량은 무처리보다 고농도인 4,500ppm 에서 1.16mg으로 가장 낮았다. 4. 유리 proline 함량은 무처리에서는 발아 후 3일과 8일에서 큰 차이를 보이지 않았고 발아 후 3일째 망간농도2,500ppm과 4,500ppm에서 각각 3,286$\mu$mole과 5,872$\mu$mole로 망간농도가 높아질수록 유리 proline 함량이 증가하였다. 5. SOD 활성은 발아 후 2일째 무처리가 762EU인 것에 비해 망간농도 4,500ppm에서는 1,693EU로 가장 높았다.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.695-707
• /
• 2014

This study investigated the chloride binding isotherms of various cement types, especially the contributions of C-S-H and AFm hydrates to the chloride binding isotherms were determined. Ordinary Portland cement (OPC), Modified cement (MC), Rapid-hardening Portland cement (RHC) and Low-heat Portland cement (LHC) were used. The total chloride contents and free chloride contents were analyzed by ASTM. The contents of C-S-H, AFm hydrates and Friedel's salt were determined by X-ray diffraction Rietveld (XRD Rietveld) analysis. The results showed that OPC had the highest chloride binding capacity, and, LHC had the lowest binding capacity of chloride ions. MC and RHC had very similar capacities to bind chloride ions. Experimental equations which distinguish the chemically bound chloride and physically bound chloride were formulated to determine amounts of the bound chloride basing on chloride binding capacity of hydrates.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.211-215
• /
• 1999

The pure-separation of calcium chloride-treated fibroin hydrolysates could be carried out using gel filtration chromatography. Also, the effect of its enzymatic hydrolysis was investigated in order to find out the enhancement of their functionality. The average molecular weight(Mw), solubility and free amino acid compositions of three hydrolysates samples (calcium chloride, calcium chloride-flavourzyme and calcium chloride-thermoase)were measured to compare their characteristics. The molecular weight of calcium chloride hydrolysate was about Mw 46,800 and it can be reduced to Mw 12,500 and 1,070 upon the enzymatic hydrolysis by flavourzyme and thermoase, repectively. A solubility of calcium chloride-treated samples shows about 60% while calcium chloride/enzyme-treated samples are perfectly soluble (100% solubility). The total amino acid composition of calcium chloride enzymatic hydrolysates are much higher than that of calcium chloride hydrolysate.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.663-670
• /
• 2005

The present study concerns the influence of binder type on the chloride-induced corrosion being accompanied by the chloride threshold level (CTL), chloride transport and as their results the corrosion-free lift. Two levels of cement content, $30\%$ PFA and $65\%$ GGBS concrete were employed. It was found that the most dominant factor to the CTL is the entrapped air void content at the steel-concrete interface, irrespective of the chloride binding capacity, binder type and acid neutralisation capacity of cement matrix. The CTL for lower interfacial air void contents was significantly increased up to $1.52\%$ by weight of cement, whereas a same mix produced $0.35\%$ for a higher level of voids. Because of a remarkable reduction in the diffusion fur GGBS concrete, its time to corrosion ranges from 255 to 1,250 days, while the corrosion-free life for control varies from 20 to 199 days sand for $30\%$ PFA concrete from 200 to 331 days.