• Ocean Systems Engineering
• /
• v.10 no.3
• /
• pp.289-316
• /
• 2020

In the present paper, the effect of the location of stern planes on the flow entering the submarine propeller is studied numerically. These planes are mounted on three longitudinal positions on the submarine stern. The results are presented considering the flow field characteristics such as non-dimensional pressure coefficient, effective drag and lift forces on the stern plane, and the wake flow formed at the rear of the submarine where the propeller is located. In the present study, the submarine is studied at fully immersed condition without considering the free surface effects. The numerical results are verified with the experimental data. It is concluded that as the number of planes installed at the end of the stern section along the submarine model increases, the average velocity, width of the wake flow and its turbulence intensity formed at the end of the submarine enhance. This leads to a reduction in the non-uniformity of the inlet flow to the propulsion system.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.713-716
• /
• 1998

To examine the influence of unsteady wake on the flow and heat transfer characteristics, an experiment has been conducted in a four-vane linear cascade. Flow and heat transfer measurements are made for the inlet Reynolds number of 66000(based on chord length and free-stream velocity). Turbulent intensity and stress were measured using hot wire anemometer, and to measure the convective heat transfer coefficients on the blade surfaces liquid crystal/gold film Intrex technique was used. The disturbance by the unsteady wake is characterized by the unresolved unsteadiness. The unsteady wake enhances the turbulent motion of flow in the cascade passage. It also promotes the boundary layer development and transition. The results show that heat transfer coefficients on the suction surface increase with increasing unresolved unsteadiness.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.138-146
• /
• 2012

Using Shear-free Ship wake theory it was predicted the detectable submarine's turbulent wake on the sea surface was about 12km long when there was no breaking waves on the sea surface. It means that there are sufficient detectable turbulent kinetic energies on the sea surface as well as in the water. In this paper, we have proposed some concepts of non acoustic anti-submarine surveillance systems; SAR for sea surface surveillance, LIDAR for sub-surface surveillance and propelled gliders for under -water surveillance.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.393-396
• /
• 1998

To examine the influence of unsteady wake on the flow and heat transfer characteristics, an experiment has been conducted in a four-vane linear cascade. Flow and heat transfer measurements are made for the inlet Reynolds number of 66000(based on chord length and free-stream velocity). Turbulent intensity and stress were measured using hot wire anemometer, and to measure the convective heat transfer coefficients on the blade surfaces liquid crystal/gold film Intrex technique was used. The disturbance by the unsteady wake is characterized by the unresolved unsteadiness. The unsteady wake enhances the turbulent motion of flow in the cascade passage. It also promotes the boundary layer development and transition. The results show that heat transfer coefficients on the suction surface increase with increasing unresolved unsteadiness.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.21-32
• /
• 1992

Numerical solutions are presented for solving the free surface flow created by a three-dimensional body moving beneath the free surface with constant velocity at an angle of attack. The solution is obtained using a panel method based on the perturbation potential, which employs Havelock sources and normal dipoles distributed on the body surface and Havelock normal dipoles in the wake downstream of the trailing edge. A pressure Kutta condition with an iterative solution procedure is implemented to satisfy equal pressure condition on the upper and lower surfaces at the trailing edge. Numerical calculation examples in the present paper include an ellipsoid at zero angle of attack, a rectangular planform wing at a small angle of attack in the limit of zero Froude number and then free surface flows and hydrodynamic forces acting on the submerged spheroid and parabolic strut are calculated. Discussions are made about the validity of the present method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.270-282
• /
• 2020

Analysis: of the propulsion performance considering ship motion in waves is an important factor for the efficient operation of a ship. The interaction between the propeller and the free surface due to the ship motion in waves has a significant influence on the propulsion performance. However, most recent studies regarding the hydrodynamic performance of ships in waves focus on the added resistance, and experimental and numerical data on the propulsion performance considering the ship motion in waves are very rare. In this study, a numerical investigation of the nominal wake in regular head waves is performed for a KVLCC2 model ship for the fully-loaded condition. Phase-averaged wake fields for one period are compared with experimental data measured using Stereo PIV, showing good agreement. The effect of the ship motion on the characteristics of the wake field and the axial velocity in the propeller plane are investigated while varying the wave length.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.2
• /
• pp.145-153
• /
• 2010

In this work, the comprehensive structural dynamics codes including DYMORE and CAMRAD II are used to validate the higher harmonic control aeroacoustic rotor test (HART) II data in descending flight condition. A total of 16 finite elements along with 17 aerodynamic panels are used for the CAMRAD II analysis; whereas, in the DYMORE analysis, 10 finite elements with 31 equally-spaced aerodynamic panels are utilized. To improve the prediction capability of the DYMORE analysis, the finite state dynamic inflow model is upgraded with a free vortex wake model comprised of near shed wake and trailed tip vortices. The predicted results on aerodynamic loads and blade motions are correlated with the HART II measurement data for the baseline, minimum noise and minimum vibration cases. It is found that an improvement of solution, especially for blade vortex interaction airloads, is achieved with the free wake method employed in the DYMORE analysis. Overall, fair to good correlation is achieved for the test cases considered in this study.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.165-173
• /
• 2017

The aeromechanics predictions of HART I rotor obtained using a computational structural dynamics (CSD) code are evaluated against the wind tunnel test data. The flight regimes include low speed descending flight at an advance ratio of ${\mu}=0.151$ and cruise condition at ${\mu}=0.229$. A lifting-line based unsteady airfoil theory with C81 table look-up is used to calculate the aerodynamic loads acting on the blade. Either rolled-up free wake or multiple-trailer wake with consolidation (MTC) model is employed for the free vortex wake representation. The measured blade properties accomplished recently are used to analyze the rotor for the up-to-date computations. The comparison results on airloads and structural loads of the rotor show good agreements for descent flight and fair for cruise flight condition. It is observed that MTC model generally improves the correlation against the measured data. The structural loads predictions for all measurement locations of HART I rotor are investigated. The dominant harmonic response of the structural loads is clearly captured with MTC model.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.63-76
• /
• 2009

A study on the interference effects of overlapping tandem rotors in forward flight is conducted using the time-marching free-wake panel method which adopts field velocity boundary integral formulation. The conventional boundary integral formulation is numerically unstable for the cases when the blade and the wake are in close proximity to each other. In order to avoid this problem, this study applies the field velocity method and modifies the boundary integration formulation. The improved method is used for the parametric study on the advance ratio and the distance between the rotors. These are the parameters that most affect the interference of the tandem rotor in forward flight. Comparison of the aerodynamic performance shows that the horizontal distance between the rotors negligibly influences the overlap-induced power factor for high advance ratio. In addition, it shows that the overlap-induced power factor is inversely proportional to the squared vertical distance between the rotors, and that the overlap-induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.100-105
• /
• 2000

The present work describes the prediction method for the unsteady flow field and the acoustic pressure field of a ducted axial fan. The prediction method is comprised of time-marching free-wake method, acoustic analogy. and the Helmholtz-Kirchhoff BEM. The predicted sound signal of a rotor is similar to the experiment one. We assume that the rotor rotates with a constant angular velocity and the flow field around the rotor is incompressible and inviscid. Then, a time-marching free-wake method is used to model the fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lawson's method is used to predict the acoustic source. The newly developed Helmholtz-Kirchhoff BEM for thin body is used to calculate the sound field of the ducted fan. The ducted fan with 6 blades is analysed and the sound field around the duct is calculated.