• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.1007-1010
• /
• 2017

In this paper, a frequency selective surface(FSS) with bandstop operation for radio-frequency spectrum management is presented. The proposed FSS is composed of patterns of fractal-based miniaturized unit cells for stable performance for angles of incidence and polarizations. For practical applications requiring high productivity and environmental compatibility, we fabricated a film-type FSS by screen-printing using Ag ink, rather than a conventional manufacturing method using a printed circuit board. To validate this study, we measured the transmission characteristics of the proposed FSS using the free-space measurement method, and observed the received strength of signal penetrating the FSS film applied to a wall.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.209-214
• /
• 2017

A plane-wave incident upon asymmetric multi-layered dielectric grating as well as symmetric grating structure generates space harmonics. Selected space harmonics among those harmonics can undergo strong resonance scattering variations known as GMR(guided-mode resonance). In this paper, to clarify these effects, the field propagation and dispersion curve inside the grating region are analyzed by using a rigorous equivalent transmission-line theory(RETT) based on eigenvalue problem. The results show that, at the peak of a scattering resonance, the reflected mode is almost identical to a leaky wave that can be supported by the grating structure. Thus, it confirms to be occurred GMR effect associated with the free-resonant character of leaky waves at asymmetric multi-layered dielectric gratings. Quantitative simulation results illustrating the behavior of typical gratings are given, and the special case of normal incidence is discussed for TE and TM modes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.5
• /
• pp.395-409
• /
• 2022

To overcome the limitation of conventional rock excavation methods, the excavation with abrasive waterjet has been actively developed. The abrasive waterjet excavation method has the effect of reducing blasting vibration and enhancing the excavation efficiency by forming a continuous free surface on the rock. However, the waterjet cutting performance varies with rock fracturing characteristics. Thus, it is necessary to analyze the cutting performance for various rocks in order to effectively utilize the waterjet excavation. In this study, cutting experiments with the high pressure waterjet system were performed for basalt and granite specimens. Water pressure, standoff distance, and traverse speed were determined as effective parameters for the abrasive waterjet cutting. The cutting depth and width of basalt specimens were analyzed to compare with granite results. The averaged cutting depth of basalt was shown in 41% deeper than granite; in addition, the averaged cutting width of basalt was formed by 18.5% narrower than granite. The results of this study are expected to be useful basic data for applying rock excavation site with low strength and high porosity such as basalt.

• Korean Journal of Animal Reproduction
• /
• v.17 no.3
• /
• pp.221-232
• /
• 1993

Morphological changes in the uterine and vaginal epithelial cells of the Korean native goats were studied in fifteen primiparous goats slaughtered on the day of parturition and on days 1, 3, 10 and 21 postpartum. 15 uterus and vagina from goats were examined by scanning and transmission electron microscopy. The results obtained in this study were summarized as follows : 1. Transmission electron microscopically, long microvilli which sometimes ramified were found until 10 days postpartum, while short microvilli were found at 21 days. The high electron dense irregular-shaped mitochondria were found in the cytoplasm and the crystalline structure of the mitochondrial matrix was also found from 1 day to 10 days postpartum. Well-developed rough-endoplasmic reticulum (rER) with dilated cisternae which contained the proteins materials was observed at 21 days postpartum. These materials were fused each other and then large granules were found in the free surface of the cytoplasm. A few lipid droplets were generally appeared in the cytoplasm, while numerous droplets were found at 21 days postpartum. A moderate number of ribosomes, a few multivesicular bodies, vesicles, lysosomes and macrophages were found. The globule leucocytes were observed from 0 to 3 days postpartum by transmission electron microscopy. The short microvilli, high electron dense cytoplasm and severe indentation of the nuclear enbelope were found in the vaginal epithelium. Numerouos small vesicles and a few vacuoles were observed in the apical cytoplasmic portion of the epithelium. A few mitochondria were high electron dense and irregular in shape. A moderate amounts of microfilaments, loose intercellular space and dilated rER were also found at 21 days postpartum. 2. Scanning electron microscopically, the folds of the uterine mucosa were generally deep. The long microvilli of the epithelium were found until 3 days postpartum, while short microvili were found at 10 and 21 days postpartum. The distinct intercellular boundary was seen. The apporcine secretory profile of the epithelium observed at between 3 and 10 days postpartum and the cells were somewhat protruded into the lumen. The short microvilli were found on the surface of the protruded cells, while polygonal microridge profile of the epithelium and some dome-shaped epithelium were also observed at 21 days postpartum. The folds of the vaginal mucosa were deep and epithelium was polygonal in shape. The microvilli of the epithelium were long until 3 days postpartum, while they were short at 10 and 21 days. The polygonal epithelium was invaginated into the center of the cell surface until 10 days postpartum. The microridge and dome in shape of the epithelium were found at 10 days postpartum, while the polygonal and exfoliating epithelium were observed at 21 days.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.841-847
• /
• 2021

In this paper, the applicability of the low-density surface film copper mesh for aircraft applications have been analyzed. Recently, low-density surface film copper mesh is developed to reduce weight and cost compared with traditional surface film copper mesh. In order to apply low-density surface film copper mesh to aircraft, it is needed to analyze its electromagnetic effects as well as structural integrity with sandwich panels to prevent pinholes. The structural integrity and electromagnetic characteristics have been analyzed for 2 samples of low-density surface film copper mesh and 1 sample of surface film copper mesh. To review the applicability of the low-density surface film, it is combined with sandwich composite panel to confirm pinhole effects. The low-density surface film has been modeled as a periodic structure and analyzed with 3D electromagnetic simulation tool. The simulation results has been verified through measured electromagnetic transmission results using free space measurements. From the results, it will be possible to use these results for the analysis and the applicability of low-density surface film copper mesh for aircraft.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.235.1-235.1
• /
• 2015

Artificially-engineered materials, whose electromagnetic properties are not available in nature, such as negative reflective index, are called metamaterials (MMs). Although many scientists have investigated MMs for negative-reflective-index properties at the beginning, their interests have been extended to many other fields comprising perfect lenses. Among various kinds of MMs, metamaterial absorbers (MM-As) mimic the blackbody through minimizing transmission and reflection. In order to maximize absorption, the real and the imaginary parts of the permittivity and permeability of MM-As should be adjusted to possess the same impedance as that of free space. We propose a dual-wide-band and polarization-independent MM-A. It is basically a triple-layer structure made of metal/dielectric multilayered truncated cones. The multilayered truncated cones are periodically arranged and play a role of meta-atoms. We realize not only a wide-band absorption, which utilizes the fundamental magnetic resonances, but also another wide-band absorption in the high-frequency range based on the third-harmonic resonances, in both simulation and experiment. In simulation, the absorption bands with absorption higher than 90% are 3.93 - 6.05 GHz and 11.64 - 14.55 GHz, while the experimental absorption bands are in 3.88 - 6.08 GHz and 9.95 - 13.84 GHz. The physical origins of these absorption bands are elucidated. Additionally, it is also polarization-independent because of its circularly symmetric structures. Our design is scalable to smaller size for the infrared and the visible ranges.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.425-430
• /
• 2013

Robust and high speed underwater communication is severely limited when compared to communications in terrestial. In free space, RF communication operates over long distances at high data rates. However, the obstacle in seawater is the severe attenuation due to the conducting nature. Acoustic modems are capable of long range communication up to several tens of kilometers, but it has low data-rate, high power consumption and low propagation speed. An alternative means of underwater communication is based on optics, wherein high data rates are possible. In this paper, the characteristics of underwater channel in the range of visible wavelength is investigated. And the possibility of optical wireless communication in underwater is also described. The LED-based transceiver and CMOS sensor module are integrated in the system, and the performance of image transmission was demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.8-17
• /
• 2010

Ubiquitous home refers not only to home but also to logical space, including a wide range of out-home personal devices such as mobile phones, PDAs, laptops, car navigators, and office PCs. There are certain connection barriers among the devices, such as the dynamic IP address, NAT. In a home network, various devices coexist in heterogeneous networks, such as IP, IEEE1394, PLC, Bluetooth, ZigBee, UWB, and IrDA, all of which lack interoperability due to their different physical transmission characteristics and protocols. In ubiquitous home where an unrestricted collaboration of the devices is essential to offer services that meet the users' requirements, free interoperability among the devices must be guaranteed. This paper proposes a networking model for interoperability of the heterogeneous devices in a ubiquitous home based on a virtual overlay network which hides the complicated physical network configurations and heterogeneity of the service protocols.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.709-716
• /
• 2016

In this paper, A duplexer module with temperature-insensitive electrical characteristics was proposed for remote wireless communication system. Duplexer modules are required to have performances of low insertion loss, high isolation between transmitted band and received band, harmonic suppression as well as high power durability in the system for transmitting guided information to missile flying a free space on the ground. The proposed duplexer module are consist of transmission bandpass filter and receiving bandpass filter which are connected to common antenna port, planar coupler for output power monitoring and low pass filter for harmonic attenuation of power amplifier and coaxial cavity resonator. The material and dimensions of the resonator are determined for minimum frequency shift by temperature variation using 3D EM simulation. The measured results of the prototype showed a good agreement with the simulation results, and it should be well applied not only for guided weapon systems but also for any other communication systems such as remote radio head.