• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1069-1074
• /
• 2006

Heat loss by window in building occupies about 1/4 of energy amount used building. Therefore, high thermal insulation of windows system can speak as very important part in save energy of building. in this research, After select most suitable frame design and Glazing system for high thermal insulation of windows, execute simulation of mixing frame and Glazing System. Also, manufacture windows with the result and execute verification experiment, with verified simulation, this research evaluated thermal insulation performance of window by Glazing System's change.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.16-22
• /
• 2001

There are several traditional factors of software quality. Some of them are such as correctness, reliability, efficiency, compatibility, portability, etc. In addition to them, security is required as another factor of software quality nowadays because some application programs are used as a way to attack information systems by stack frame manipulation. Each processor has its own peculiar stack frame mechanism and C language uses the characteristics of them. This paper explains the concept of security problem caused by stack frame manipulation, and the stack frame mechanism of Pentium, Alpha and SP ARC processor in detail. And then it examines the effect of stack frame mechanism on the security of programs in C language.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.627-632
• /
• 2010

Recently the research for lightening the railway vehicle is actively made according to the demand of the environment-friendly technology development contributing to the energy cost reduction and the green growth. The railway vehicle lightweight research is expanded to the load-supporting first structure from the secondary structure which doesn't support the load. After the composite car body development used in the Korean tilting train is completed, the composite bogie frame development in which the weight reduction efficiency is large is progressed. In this paper, distributed strain was monitored when the train load was added to the central part of the composite bogie side-frame. By using the optical fiber which was attached to the lower part of the side-frame and the developed Brillouin correlation domain analysis (BOCDA) system, the strain distribution could be measured with 3cm step over 3m section. This strain distribution was compared with the design value by the FE analysis when the load of 14ton and 18ton added. This experiment can verify the manufactured composite bogie side-frame.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.523-541
• /
• 2011

In current IEEE 802.11 wireless LAN, every unicast transmission requires an ACK from the receiver for reliability, though it consumes energy and bandwidth. There have been studies to remove or reduce ACK overhead, especially for energy efficiency. However none of them are practically used now. This paper introduces a noble method of selective unacknowledged transmission, where skipping an ACK is dynamically decided frame by frame. Utilizing the fact that a multicast frame is transmitted without accompanying an ACK in 802.11, the basic unacknowledged transmission is achieved simply by transforming the destination address of a frame to a multicast address. Since removing ACK is inherently more efficient but less strict, its practical profit is dependent on traffic characteristics of a frame as well as network error conditions. To figure out the selective conditions, energy and performance implications of unacknowledged transmission have been explored. Extensive experiments show that energy consumption is almost always reduced, but performance may be dropped especially when TCP exchanges long data with a long distance node through a poor wireless link. An experiment with a well-known traffic model shows that selective unacknowledged transmission gives energy saving with comparable performance.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.251-257
• /
• 1998

Spherical space frame structure with triangular network pattern, which has the various characteristics for the mechanic property, a funtional property, an aesthetic property and so on, has often been used as one of the most efficient space structures. It is expected that this type will be used widely in large-span structural roofs. But because this structure is made of network by combination of line elements there me many nodes therefore, the structure behavior is very complicated and there can be an overall collapse of structure by buckling phenomenon if the external force reaches a limitation. This kind of buckling is due to geometric shape, network pattern, the number of layer and so on, of structure. Therefore spherical space frame with triangle network pattern have attracted many designers and researchers attention all over the world. The number of layer of space frame is divided in to the simgle, double, multi layer. That is important element which is considered deeply in the beginning of structural design. The buckling characteristics of single-layer model and double-layer model for the spherical space frame structure with triangular network pattern are evaluated and the buckling loads of these types are compared with investigation their structural efficiency in this study.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.553-564
• /
• 2022

Many existing reinforced concrete (RC) structures need to be strengthening for reason such as poor construction quality, low ductility or designing without considering seismic effects. One of the strengthening methods is strengthening technique with eccentrically braced frames (EBFs). The characteristic element of these systems is the link element and its length is very important in terms of seismic behavior. The link element of Y shaped EBF systems (YEBFs) is designed as a short shear element. Different limits are suggested in the literature for the link length. This study to aim experimentally investigate the effect of the link length for the suggested limits on the behavior of the RC frame system and efficiency of strengthening technique. For this purpose, a total of 5 single story, single span RC frame specimens were produced. The design of the RC frames was made considering seismic design deficiencies. Four of the produced specimens were strengthened and one of them remained as bare specimen. The steel YEBFs were used in strengthening the RC frame and the link was designed as a shear element that have different length with respect to suggested limits in literature. The length of links was determined as 50mm, 100mm, 150mm and 200mm. All of the specimens were tested under cyclic loads. The obtained results show that the strengthening technique improved the energy consumption and lateral load bearing capacities of the bare RC specimen. Moreover, it is concluded that the specimens YB-2 and YB-3 showed better performance than the other specimens, especially in energy consumption and ductility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1822-1828
• /
• 2006

A key-frame should be efficiently selected to distinguish bad information from the videos. A previous technique selecting a key-frame mostly consists of the transformation scene-centered. In the case of harmful videos containing the quaility of continuous changes, the technique makes the total rate be reduced by an unnecessary key-frame. This thesis suggests the technique selecting a key-frame, an entry of the distinguishing system by using the quality of changes between the frames. In the experiment of this technique, it was proved that over 90% of the bad information was distinguished by the selected key frame, and also time efficiency was proved by showing 68% of decrement compared to the numbers I-frame. Therefore, This technique makes the system efficient to distinguish bad information, and efficiently can contribute to the distribution of the healthy movie information.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.9-18
• /
• 2005

This paper presents the method of calculating the quantization level of the intra-frame in MPEG-4 video encoder. The intra-frame is an essential part in that the quality of the whole GOP is affected by the quality of this frame since the intra-frame, which works as a reference frame within GOP, continuously propagates through other frames. This work proposes how to use bits assigned for gaining the quantization level of the intra-frame, complexity of input images, and GOP structures. The result shows that while existing approaches have the decline in efficiency by using fixed values or show different qualifies depending on the characteristics of the images, the current approach shows the steady results in various images. Comparing with Q2 algorithm obtained in MPEG-4 VM, the approach suggested in this paper gains the benefit of maximum 3.49dB with some variations depending on the characteristics of the images.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.20-26
• /
• 2013

We propose PHY Frame Structure for M2M direct communications in licensed frequency band. Especially, the proposed PHY Frame Structure coexists in the same licensed frequency band as currently operating cellular systems. Recently, Machine to Machine (M2M) service markets, including SmartGrid, Mobile Health, and Smart Car, are being rapidly expanded. Supporting M2M services in a specific case can waste Radio Resource in cellular systems. For example, when two M2M terminals communicating to each other are closely located, direct communication is radio resource efficient. In this paper, we set the requirement of maintaining the existing PHY frame structure in cellular systems to meet the backward compatibility. Based on this backward compatibility requirement, PHY frame structure for M2M direct communications is developed while satisfying coexistence with current operating cellular system. The proposed PHY frame structure meets backward compatibility. Accordingly, it is expected that the proposed M2M frame structure is useful for its frequency resource efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1631-1641
• /
• 2012

A TDMA system in satellite communication has been utilized. Especially DVB-S2 was standardized and now operated in satellite broadcasting system. In this paper, we propose a TDMA frame structure appropriate for special purpose which has the good reliablilty in a poor RF environment even if frequency efficiency is decreased. TDMA frame duration is 12 seconds which is long duration in comparison with general TDMA system with several ms. Designing the frame structure, time and frequency shift in single frame duration are considered. Simulation results show that the proposed frame structure and synchronization method has robust synchronization performance when the terminal is even in low SNR as well as 25 kHz frequency offsets.