• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.601-617
• /
• 2014

In digital radio broadcasting systems, long delays are incurred in service start time when tuning to a particular frequency because several synchronization steps, such as symbol timing synchronization, frame synchronization, and carrier frequency offset and sampling frequency offset compensation are necessary. Therefore, the operation of the synchronization blocks causes delays ranging from several hundred milliseconds to a few seconds until the start of the radio service after frequency tuning. Furthermore, if spectrum inversed signals are transmitted in digital radio broadcasting systems, the receivers are unable to decode them, even though most receivers can demodulate the spectral inversed signals in analog radio broadcasting systems. Accordingly, fast synchronization techniques and a method for spectral inversion detection are required in digital radio broadcasting systems that are to replace the analog radio systems. This paper presents a joint detection method of frame, integer carrier frequency offset, and spectrum inversion for DRM Plus digital broadcasting systems. The proposed scheme can detect the frame and determine whether the signal is normal or spectral inversed without any carrier frequency offset and sampling frequency offset compensation, enabling fast frame synchronization. The proposed method shows outstanding performance in environments where symbol timing offsets and sampling frequency offsets exist.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.375-379
• /
• 2012

This study was carried out to define the "Wolla" coat color using 376 Jeju registered horses (white patched 142, solid coat color 234). Three major factors related to the white patches i.e ECA3-inversion for Tobiano, EDNRB 2 bp nucleotide substitution for frame Overo, and the KIT intron 16 single nucleotide polymorphism (SNP) for Sabino types of coat color were analyzed. It was found that out of 142 Jeju horses with white patches that have the genotype for ECA3-inversion (To) 140 horses were +/To heterozygous and 2 horses were To/To homozygous all Jeju horses with white patches had ECA3-inversion allele. However, there was no frame Overo or Sabino allele type in EDNRB and KIT intron 16 SNP in Jeju horses with white patches. As for 234 Jeju horses with a solid coat color, there was no ECA3-inversion allele related to the white patches. Thus, it could be considered that Wolla coat color with white patches in Jeju horses might have come from the Tobiano line in the genetic classification by coat color.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.6
• /
• pp.622-632
• /
• 2004

We have studied how liquid crystal's rubbing direction and voltage driving method affect generation of disclination line. At first, generation of disclination line in vertical alignment(VA) cell and VA-twisted nematic(TN) cell has been examined. When liquid crystal's rubbing direction of bottom substrate was 0$^{\circ}$, the degree of generated disclination line was the smallest value. Further, the generation of disclination line above the electrode is less in the frame inversion than in the line inversion. Secondly, we have examined a generation of disclination line in reflective fringe-field switching cell. When the distance between common electrodes is over 3 ${\mu}{\textrm}{m}$ with on-state of one pixel and off-state of neighboring pixels, the reflectance appears only on-state pixel without generating reflectance in adjacent pixels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.8
• /
• pp.1-10
• /
• 2001

This paper describes new line code algorithm, called NIDI(Nibble Inversion mock Inversion) which is well suited for interconnection and transmission technology, The proposed line code which includes only one redundancy bit serves primary features of line code and synchronization patterns for byte or frame synchronization in interconnection, Also, this line code provides in-band signals and speciaI characters.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.27-35
• /
• 2013

In this study, we developed the trial product on 3D magnetic inversion tentatively named 'KMag3D'. Also, we briefly introduced its own function and graphic user interface on which especially focused through the development in the form of user manual. KMag3D is consisted of two fundamental frame for the 3D magnetic inversion. First, algebraic reconstruction technique was selected as a 3D inversion algorithm instead of least square method conventionally used in various magnetic inversion. By comparison, it was turned out that algebraic reconstruction algorithm was more effective and economic than that of least squares in aspect of both computation time and memory. Second, for the effective determination of the 3D initial and a-priori information model required in the execution of our algorithm, we proposed the practical technique based on the assemblage of 2D forward modeling and inversion results for individual user-selected 2D profiles. And in succession, initial and a-priori information model were constructed by appropriate interpolation along the strke direction. From this, we concluded that our technique is both suitable and very practical for the application of 3D magentic inversion problem.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1269-1278
• /
• 2018

Using the thawed Gaussian wave packets [E. J. Heller, J. Chem. Phys. 62, 1544 (1975)] and the adaptive reinitialization technique employing the frame operator [L. M. Andersson et al., J. Phys. A: Math. Gen. 35, 7787 (2002)], a trajectory-based Gaussian wave packet method is introduced that can be applied to scattering and time-dependent problems. This method does not require either the numerical multidimensional integrals for potential operators or the inversion of nearly-singular matrices representing the overlap of overcomplete Gaussian basis functions. We demonstrate a possibility that the method can be a promising candidate for the time-dependent $Schr{\ddot{o}}dinger$ equation solver by applying to tunneling, high-order harmonic generation, and above-threshold ionization problems in one-dimensional model systems. Although the efficiency of the method is confirmed in one-dimensional systems, it can be easily extended to higher dimensional systems.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.61-72
• /
• 2002

In this parer, a new harmonic imaging technique is Proposed and evaluated experimentally. In the Proposed method. a weighted chirp signal with a hanning window is transmitted. The RF samples obtained on each array element are individually compressed by correlating with the reference signal defined as the 2nd harmonic component($2f_0$) of a transmitted chirp signal generated in a square-law system. The correlator output will then consist of the compressed version of the $2f_0$ component generated in tissue and the crosscorrelation sequence of the fundamental($f_0$) and 2f$_{0}$components. The Proposed method uses the compressed $2f_0$ component to form an image. for which the crosscorrelation term should be suppressed below at least -50dB. The Proposed method has two process, 2f$_{0}$-correlation and $2f_0$-correlation(PI) . $2f_0$-correlation can successfully eliminate the $f_0$ component with a single transmit-receive events and therefore is more efficient than the conventional Pulse inversion method in terms of the frame rate. 2i)-correlation(Pl) Performs pulse compression after applying pulse inversion method for the 2nd harmonic image with high resolution and SNR. Another advantage of the proposed method is that the SNR of 2nd harmonic imaging can be improved without limitation by increasing the duration of the chirp signal. The proposed method was verified through both the computer simulations and actual experiments .ts .

• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.825-835
• /
• 2017

Significant improvements to methodologies on structural damage detection (SDD) have emerged in recent years. However, many methods are related to inversion computation which is prone to be ill-posed or ill-conditioning, leading to low-computing efficiency or inaccurate results. To explore a more accurate solution with satisfactory efficiency, a PSO-INM algorithm, combining particle swarm optimization (PSO) algorithm and an improved Nelder-Mead method (INM), is proposed to solve multi-sample objective function defined based on Bayesian inference in this study. The PSO-based algorithm, as a heuristic algorithm, is reliable to explore solution to SDD problem converted into a constrained optimization problem in mathematics. And the multi-sample objective function provides a stable pattern under different level of noise. Advantages of multi-sample objective function and its superior over traditional objective function are studied. Numerical simulation results of a two-storey frame structure show that the proposed method is sensitive to multi-damage cases. For further confirming accuracy of the proposed method, the ASCE 4-storey benchmark frame structure subjected to single and multiple damage cases is employed. Different kinds of modal identification methods are utilized to extract structural modal data from noise-contaminating acceleration responses. The illustrated results show that the proposed method is efficient to exact locations and extents of induced damages in structures.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1792-1795
• /
• 2007

We have proposed a new driving method which improve the current stability of a-Si:H TFTs for AMOLED. It performs the negative bias annealing on driving TFTs during a certain period of a frame time. In the proposed method, the range of data signals is significantly reduced by modulating VSS.