• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.156-162
• /
• 2002

The purposes of this study were to classify somatotype was obtained from the factor scores of the upper half of body and analyze the somatometric characteristics. The sample group was drawn from boys at the ages 9 to 10 living in Pusan and Kyungsangnam-do. Data from each boy comprised 36 anthropometric measurements and 7 photographic measurements. The study reached following conclusions. 1. According to the analysis to draw somatometric factors, seven indicative factors were obtained from measurements of the upper half of body. The most significant factor "sectional size" and the second most significant factor "longitudinal size" characterized most aspects of body shape. 2. According to the analysis of somatometric characteristics by the upper half of body, they were categorized into four types; Boys in type 1 had high stature, broadest shoulders, average frame, flattest chest and quite protruded shoulder blades and belly; boys in type 2 had shortest stature, smallest frame, most sloping shoulders and flattest shoulder blades and belly; boys in type 3 had quite corpulent with average stature, rising shoulders, most protruded chest and shoulder blades and belly of protrusion close to the average; boys in type 4 had highest stature, biggest frame, broad shoulders and back, and most protruded shoulder blades and belly.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.46-52
• /
• 2014

This study suggests a small-sized screw decanter specialized for dredging sites. Generally, conventional screw decanters are composed of a cylinder and a cone. However, the suggested screw decanter simply has a cone based on a cone-type bowl structure. In this research, a commercial analysis tool is used to establish an optimal design for the bowl and the screw conveyor. Moreover, the base frame, where the main bearings that support the spindle of the bowl and the screw conveyor are installed, is optimally designed considering the weight of the rotating body and the deflection caused by the high centrifugal force. Furthermore, the natural frequency range of the spinning body, the bowl and the screw conveyor, is applied to this base frame; it is designed not to correspond to the resonance frequency range and achieves stability as a result. This study suggests an optimal design for the rotating body and the base frame of a screw decanter considering its vibration characteristics. Such a design will prevent overuse of materials and help to reduce the weight and volume-and the price-of a screw decanter.

• Earthquakes and Structures
• /
• v.14 no.6
• /
• pp.589-598
• /
• 2018

An attempt is conducted to explore the relationship between the macroscopic global damage and the local damage of shear-type RC frames. A story damage index, which can be expressed as multi-variate functions of modal parameters, is deduced based on the tridiagonal matrix of the shear-type frame. The global damage model is also originated from structural modal parameters. Due to the connection of modal damage indexes, the relationship between the macroscopic global damage and the local story damage is reasonably established. In order to validate the derivation, a case study is carried out via an 8-story shear-type frame. The sensitivities of modal damage indexes to the location and severity of local story damages are studied. The evolution of the global damage is investigated as well. Results show that the global damage is sensitive to the degree of story damage, but it's not sensitive to its location. As the number of the damaged stories increases, more and more modes will be involved. Meanwhile, the global damage evolution curve changes from the concave shape to the S-type and then finally transforms into the convex shape. Through the proposed story damage, modal damage and global damage model, a multi-level damage assessment method is established.

• Journal of the Korean housing association
• /
• v.9 no.1
• /
• pp.11-19
• /
• 1998

A transitional trend of architectural elements which would happen naturally in a building may be a cue to the changes of the times. In this respect, this study is to investigate the transformation of types of windows and doors with the full-openable bay size in Korean Buddhist Temples and search for transitional process on types of windows and doors according to the flow of the times. As the results of this study, the following conclusion could be obtained. 1. The type of bunhap(connected door frame) Deul E-Yul-Gae doors + Deul E-Yul-Gas (life up) single windows would be changed from windows of a bay just beside a on the transition that the whole would be altered into the same type. 2. The type of Bunhap (connected door frame)Deul E-Yul-Gae doors + Bunhap (connected door frame) Deul E-Yul-Gae doors would be changed into Bunhap swinging doors that the whole of windows and doors could be opend very easily. 3. The type of Bunhap swinging doors + Bunhap swinging doors would be seen in the transition that windows and doors would be altered separately due to the exchange from window and doors of one of a middle bay or a bay just beside a middle bay to swinging doors and etc.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.120-125
• /
• 2000

A heddle frame is the major part of a loom that produces woven cloth by insertion of weft yarns between warp yams. Warp yarns are manipulated by many heddles fixed in a heddle frame. Recently, the up and down speed of heddle frames has been increased much for the increase of productivity, which induces higher inertial stresses and vibrations in the heddle frame. The heddle frame has the rectangular cross-section. For the design of box type beams of rectangular cross-section, extensional stiffness EA, flexural stiffness El, and torsional stiffness GJ as well as the vibration characteristics are important and should be simultaneously considered. Tn this paper, the vibration characteristics of the composite and the composite sandwich beams for high-speed heddle frame were tested by impulse frequency response.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.1-7
• /
• 2004

We developed a novel frame interpolation method to interpolate a frame between two successive original frames. Using this method, we are able to apply a double-rate driving method instead of an impulse driving method where a black frame is inserted between two successive original frames. The double-rate driving method enables amelioration of the motion blur of LCDs caused by the characteristics of human vision without reducing the luminosity of the whole screen. The image quality of the double-rate driving method was also found to be better than that of an impulse driving method using our motion picture simulator and an actual panel. Our initial model of our frame interpolation method consists of motion estimation with a maximum matching pixel count estimation function, an area segmentation technique, and motion compensation with variable segmentation threshold. Although salt and pepper noise remained in a portion of an object mainly due to inaccuracy of motion estimation, we verified the validity of our method and the possibility of improvement in hold-type motion blurring.

• Earthquakes and Structures
• /
• v.19 no.4
• /
• pp.227-241
• /
• 2020

An experimental study has been carried out to investigate the effect of beam to column connection rigidity on the behavior of infilled steel frames. Five half scale, single-story and single-bay specimens, including four infilled frames, as well as, one bare frame, were tested under in-plane lateral cyclic reversal loading. The connections of beam to column for bare frame as well as two infill specimens were rigid, whereas those of others were pinned. For each frame type, two different infill panels were considered: (1) masonry infill, (2) masonry infill strengthened with shotcrete. The experimental results show that the infilled frames with pinned connections have less stiffness, strength and potential of energy dissipation compared to those with rigid connections. Furthermore, the validity of analytical methods proposed in the literature was examined by comparing the experimental data with analytical ones. It is shown that the analytical methods overestimate the stiffness of infilled frame with pinned connections; however, the strength estimation of both infilled frames with rigid and pinned connections is acceptable.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.231-238
• /
• 2019

The objective of this study is to understand the relationship between type of advertising and brand attachment. We divide advertising frame into loss and gain frame and examine the effect on brand attachment, The effect of unique advertising on brand attachment and the effects of interaction effects on brand attachment were examined. The results showed that the effect of the loss and gain frame on brand attachment was statistically significant. It also showed that unique advertising had positive effect on brand attachment. Moreover, the interaction effects of the advertising frame and the uniqueness of advertising have been shown to affect brand attachment. That is, the more emphasis on gain in advertising frame and the more unique advertising, the more effective on brand attachment.

• Membrane Journal
• /
• v.10 no.3
• /
• pp.155-162
• /
• 2000

The reverse osmosis membrane housing(HY) was developed for excellent distribution of a feed solution, and the separation performance was compared with the commercialized Rochem(RC) system. The permeation flux of HY system was a little lower than that of RC system. On the other hand, the NaCl rejection ra4io was generally higher. Also, the permeation flux and rejection ratio for type A, B and C modules(disc plate and frame type) were measured using NaCl, sucrose and butanol solutions. The separation performance of type C module for NaCL and sucrose solutions was the most effective, and then those of type A and B were followed, respectively. However, the separation performance for butanol solution was type B, C and A order. The flux improvement ratio of type B to A increased as butanol concentration decreased or operating pressure increased up to 28 bar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3142-3150
• /
• 2013

Present research deals with an optimal design of the C-type frame of a desktop pressing machine to minimize its deformation which plays an important role in accuracy of the machine. Deformation pattern of the frame is analyzed by the finite element method. Design parameters are defined for the frame to derive an optimal design. Displacement and weight sensitivities of the parameters are analyzed using the method of the parametric study. On the basis of the response curves for the parameters, optimal designs of the frame are proposed. Effectiveness of the optimal design is verified by analyses in the viewpoint of the deformation and weight of the frame. Deformation of the optimized frame without increase of the weight is 87.5 % of the original frame.