• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.108-115
• /
• 2012

Archaeological waterlogged woods found under the sea, in lakes, or in swamp environments are generally weak and fragile. If waterlogged wood materials were taken out of the water and left without modification, they would collapse and lose their original dimensions completely. Conservation is performed to replace the water with chemical agents and to give dimensional stabilization and durability. EDTA and PEG are the most commonly used in the preservation of wood. pH control-precipitation method is used for recovery of EDTA from waste fluid of archeological waterlogged wood conservation treatment. The black substance is eliminated from wood as Fe-EDTA complex are formed and EDTA is separated and precipitated from Fe-EDTA complexes at pH 2.68 or less. The result of analysis of the precipitated products and the commercial EDTA by FT-IR and FE-SEM showed that precipitated product by pH adjusted was not a type of Fe-EDTA complex, but pure EDTA. Waste fluid produced in PEG treatment shows the black color and has an offensive odor by organic matter extracted from wood. Color of waste fluid is decolored with oxidation reaction by peroxy hydrate. In FT-IR and SEM-EDX of PEG after freeze-drying process, no significant change of functional groups induced from oxidation is observed, and any metal ion does not exist in the solid PEG specimen. The molecular weight of PEG is measured using GPC and viscometry. Properties of PEG before and after preservation treatment, and after oxidation with $H_2O_2$ were not changed. Consequently, the peroxidation with $H_2O_2$ is a reasonable and simple method to decolor the used PEG solution.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.537-542
• /
• 2017

Aggressive driving is a major cause of car accidents. Previous studies have mainly analyzed young driver's aggressive driving tendency, yet they were only done through pure clustering or classification technique of machine learning. However, since elderly people have different driving habits due to their fragile physical conditions, it is necessary to develop a new method such as enhancing the characteristics of driving data to properly analyze aggressive driving of elderly drivers. In this study, acceleration data collected from a smartphone of a driving vehicle is analyzed by a newly proposed ECA(Enhanced Clustering method for Acceleration data) technique, coupled with a conventional clustering technique (K-means Clustering, Expectation-maximization algorithm). ECA selects high-intensity data among the data of the cluster group detected through K-means and EM in all of the subjects' data and models the characteristic data through the scaled value. Using this method, the aggressive driving data of all youth and elderly experiment participants were collected, unlike the pure clustering method. We further found that the K-means clustering has higher detection efficiency than EM method. Also, the results of K-means clustering demonstrate that a young driver has a driving strength 1.29 times higher than that of an elderly driver. In conclusion, the proposed method of our research is able to detect aggressive driving maneuvers from data of the elderly having low operating intensity. The proposed method is able to construct a customized safe driving system for the elderly driver. In the future, it will be possible to detect abnormal driving conditions and to use the collected data for early warning to drivers.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2014

The sample book was printed in 1935. Since the books in the early twentieth century were printed using acidic paper, the color of the paper would change to brown over time due to iron corrosion. In addition to corroding iron cores, the acidity of the paper (pH 3.2) also made the paper brown and fragile, as was true in the case of the sample book. To clean the paper of the sample book and to make it strong, we replaced the iron core and performed wet cleaning on the paper to remove contaminants. Then we pressed the sample book dry, and subsequently linening every page with Minoshi($4g/m^2$). Generally, book conservator rebinding the book using wires or threads: however we have devised a new method to rebind the book using colored iron cores. To color the iron core brown, they were dipped in an aqueous coloring solution ($H_2O$, $C_2H_5OH$, $CuSO_4{\cdot}5H_2O$, $FeCl_3{\cdot}6H_2O$); subsequently, a 20% paraloid B-72 was applied to protect the colored iron cores from corrosion.

• Journal of Genetic Medicine
• /
• v.13 no.1
• /
• pp.14-19
• /
• 2016

Purpose: We examined the prevalence and CGG/AGG repeat structure of expanded alleles of the FMR1 gene in preconceptional and pregnant Korean women. Materials and Methods: The CGG repeats in the FMR1 genes of 1,408 women were analyzed by polymerase chain reaction and Southern blot analysis. To estimate the prevalence of expansion alleles, the individuals were divided into low risk and high risk group. Results: Within this population, 98.4% had normal alleles and 1.6% had abnormal alleles including intermediate (0.6%), premutation (0.5%), full mutation (0.1%), and hemizygous (0.4%) alleles. There were 2 premutation alleles (1:666, 95% confidence interval [CI] 1:250-1,776) in the low risk group and 5 premutation alleles (1:15, 95% 1:6-36) in the high risk group. There were 8 intermediate alleles (1:167, 95% CI 1:130-213) in the low risk group and 1 intermediate alleles (1:76, 95% CI 1:11-533) in the high group. Six of the 7 premutation alleles did not contain AGG interruptions within the repeats and 1 had a single AGG interruption. Four of the 9 intermediate alleles contained 2-3 AGG, 4 had a single AGG, and 1 had no AGG interruptions. Conclusion: Our study demonstrates the prevalence and CGG/AGG structure of expansion alleles in Korean women. The identified premutation prevalence is higher than that of other Asian populations and lower than that of Caucasian populations. Although our study is limited by size and population bias, our findings could prove useful for genetic counseling of preconceptional or pregnant women.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.127-134
• /
• 2009

Purpose: Adipose tissue injection as a free graft for the correction of soft - tissue deficiency or depression deformity is a widespread procedure in plastic surgery. This study is to analyze the changes and viability of cryopreserved adipose tissue and to find out efficient long - term storage period. Methods: After centrifugation of aspirated abdominal tissues, $10m{\ell}$ of packed Adipose tissue were freezed at $-20^{\circ}C$. For 2, 4, 6, 8 months, each frozen samples were taken and injected into scalp of SCID mice. After 15 weeks, injected Adipose tissue were sampled and analyzed at 2 months interval. We compared and analyzed each group about the weight of the injected fat, histologic impressions, activity of mitochondria, size of a fat cell and rate of survival. Results: Significant weight changes were observed in cryopreservation for 2 months(p<0.05). Histologic changes were observed, independent of the freezing period with H - E stain. Among cryopreservations for 2, 4, 6 months, no significant change were observed. The reduction of mitochondrial enzymatic activity was observed independent of time interval but activity of mitochondrial dehydrogenase was reduced less than 50% in MTT assay. Conclusion: Freezing in $-20^{\circ}C$ for 6 months has no adverse effect to Adipose tissue, but fragile adipocytes, damaged cell membrane during harvesting procedure, were disrupted within 1 - 2 month and the maximum volume reduction were followed less than 2 months. These results demonstrate that tissue preparation cells without membrane damage have the greatest viability level and cryopreservation less than 2 months has great volume effect and cryopreservation for 6 months has stable volume effect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.604-608
• /
• 2006

Polymer composites for measuring the radioactive contamination are prepared by coating ZnS(Ag) powders as a scintillator on polysulfone base layer. The composites consist of the active layer for a scintillation reaction with radioactive wastes and the transparent support layer for transmittance of light photons emitted by scintillation in the active layer. The binding of the active layer, including ZnS(Ag), on the support layer is proceeded via coating with polysulfone as a binder, without any extra adhesive. The coating was obtained by either casting via a Doctor Blade as applicator or screen printing. The prepared composites feature a monolithic structure, resulting in the complete adhesion between two layers. The composite prepared by the casting technique using an applicator holds a good detection efficiency in measuring the alpha radionuclide, but its structure becomes fragile because of warping in morphology. On the contrary, the composite prepared by the screen printing shows a good detection capacity as well as a good stability in a mechanical shape.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.140-145
• /
• 2018

This paper deals with the dynamical analysis of a two-point mooring vessel under surge excitations. The characteristics of nonlinear behaviors are investigated completely including bifurcation and limit cycle according to particular input parameter changes. The strong nonlinearity of the mooring system is mainly caused by linear and cubic terms of restoring force. The numerical simulation is performed based on the fourth order Runge-Kutta algorithm. The bifurcation diagram and several instability phenomena are observed clearly by varying amplitudes as well as frequencies of surge excitations. Stable periodic solutions, called the periodic windows, can be obtained in succession between chaotic clouds of dots in case of frequency ${\omega}=0.4rad/s$. In addition, the chaotic region is unexpectedly increased when external forcing amplitude exceeds 1.0 with the angular frequency of ${\omega}=0.7rad/s$. Compared to the cases for ${\omega}=0.4$, 0.7rad/s, the region of chaotic behavior becomes more fragile than in the case of ${\omega}=1.0rad/s$. Finally, various types of steady states including sub-harmonic motion, limit cycle, and symmetry breaking phenomenon are observed in the two-point mooring system at each parameter value.

• 보존과학연구
• /
• s.36
• /
• pp.74-85
• /
• 2015

An ox bone object was excavated from the wetland at the excavation site in Bogam-ri tumulus, Naju. It was only able to identify the full image of the shape. Bogam were deteriorated and cracked due to the soil pressure and the repeated cycle of freezing and melting. They were also fragmented in pieces and powdered. In situ, bones were dewatered, consolidated and wrapped together with surrounding soils not to lose the fragmented bone pieces. Unpacking was carried out in the conservation lab and the treatment was processed. Soils on the reverse were removed and then the surface was consolidated and reinforced. Then, soils on the excavated side was cleaned and the surface was consolidated. The object was placed in the produced storing box. When the ox bone object was excavated, it did not have its head and was in the shape of tieing all its legs up. This shows that the animal had been tied up during a ritual and then buried. During the treatment, the importance of the burial purpose and maintaining the shape at the time of excavation was considered. Therefore, the shape of the object at the time of excavation was maintained rather than dismantling all these fragile bones and finding the shape of an ox. This conservation of ox bone object shows that conservation treatment methods have to be vary depending on characters and conditions of objects. In addition, it is expecting that this writing could be the reference to bone and horn objects excavated in the future for the whole process from the excavation to the conservation treatment.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.81-88
• /
• 2018

Air and ultra lightweight aerogels were used to lighten the weight of the firefighters' protective clothing. In order to lighten the firefighters' protective clothing composed of 3 layers (outer shell, mid-layer, lining), it was most effective to replace the lining which occupied the largest weight in the total weight with the new materials. Thermal protective performance tests were carried out on flame (ASTM D 4108), radiant heat (KS K ISO 6942) and mixing heat (KS K ISO 17492) of flame and radiation. When the lining felt was replaced with an air layer, the air layer must be at least 3 mm to meet the KFI and ISO standards for the thermal protective performance. However, even if the thickness of the air layer increased to 10 mm, the thermal protective performance was lower than that of the existing products. When the felt was replaced with aerogels, the TPP rating (ASTM D 4108) satisfied the KFI standard at the 2 mm thickness of the aerogels. When the thickness of the aerogels was 3 mm, the TPP rating was improved about 140% compared to the existing products. It was confirmed that not only weight reduction but also thermal protective performance was improved by use of aerogels. However, due to the fragile nature of aerogels, a method of fixing them to a constant thickness between layers constituting a firefighters' protective clothing should be considered in the future.