• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.129-136
• /
• 2005

지하수 조사를 목적으로 시공된 시추공인근 지역에서 지표 비저항탐사, 비저항토모그래피 탐사를 실시하였다. 이들의 탐사결과로부터 기존 분석 자료인 기반암심도, 암반대수층, 파쇄대 등에 대하여 비교하였다. 지표 탐사로부터 충적 대수층 경계 해석을 위한 현장자료 취득에서 전극배열, 전극간격에 따른 지하구조 해석방법을 제시하였고 한계점을 검토하였다. 그리고 비저항 토모그래피 탐사결과로부터 두 시추공사이의 암반 대수층의 지하수 유동 통로와 관련된 지하구조 해석을 시도하였다. 그 결과 상기 탐사방법들이 기반암 심도, 충적대수층의 경계 및 암반대수층의 지하수 유동통로 등의 해석에 유용함을 제시하였다.

• 한국임상수의학회지
• /
• 제34권5호
• /
• pp.396-399
• /
• 2017

This is a case report of a northern goshawk (Accipiter gentilis), admitted to the wildlife rescue center with right coracoid and scapular fracture which received conservative treatment and was soft-released successfully. At the admission, the goshawk had callus formed on the fractured bones, scars on eyebrows and severely damaged tail feathers with inability to fly. Cage rest was indicated to prevent further occurrence of fracture and to promote reunion of the fracture surface. The bird went through a rehabilitation process with appropriate physical training in flying cage to recover its fitness and flying ability. Complete molting of flight feathers with damaged rectrices was achieved during the rehabilitation period and its flight ability was recovered favorably. It was released into a proper habitat for northern goshawks, but the bird was found near the aviary where its last phase of rehabilitation was performed. A soft-release program was applied and finally the bird returned to near the first rescue location 235 km away from the release site.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.69-75
• /
• 2009

The effects of welding speed were investigated on penetration characteristics, defects and mechanical properties including formability test in Nd:YAG laser welded 1000MPa grade DP steels. A shielding gas was not used and bead-on-plate welding was performed with various welding speeds at 3.5kW laser power. Defects of surface and inner beads were not observed in all welding speeds. As the welding speed increased, the weld cross-section varied from the trapezoid having wider bottom bead, through X type, finally to V type in partial penetration range of welding speeds. The characteristic of hardness distribution was also investigated. The center of HAZ had maximum hardness, followed by a slight decrease of hardness as approaching to FZ. Significant softening occurred at the HAZ near BM. Regardless of the welding speed, the weld showed approximately the same hardness distribution. In the perpendicular tensile test with respect to the weld direction, all specimens were fractured at the softening zone. In the parallel tensile test to the weld direction, the first crack occurred at weld center and then propagated into the weld. Good formability over 80% was taken for all welding conditions.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.358-367
• /
• 2015

PURPOSE. The aim of this study was to evaluate the biaxial flexural strength (BFS) of one zirconia-based ceramic used with various veneering ceramics. MATERIALS AND METHODS. Zirconia core material (Katana) and five veneering ceramics (Cerabien ZR; CZR, Lava Ceram; LV, Cercon Ceram Kiss; CC, IPS e.max Ceram; EM and VITA VM9; VT) were selected. Using the powder/liquid layering technique, bilayered disk specimens (diameter: 12.50 mm, thickness: 1.50 mm) were prepared to follow ISO standard 6872:2008 into five groups according to veneering ceramics as follows; Katana zirconia veneering with CZR (K/CZR), Katana zirconia veneering with LV (K/LV), Katana zirconia veneering with CC (K/CC), Katana zirconia veneering with EM (K/EM) and Katana zirconia veneering with VT (K/VT). After 20,000 thermocycling, load tests were conducted using a universal testing machine (Instron). The BFS were calculated and analyzed with one-way ANOVA and Tukey HSD (${\alpha}$=0.05). The Weibull analysis was performed for reliability of strength. The mode of fracture and fractured surface were observed by SEM. RESULTS. It showed that K/CC had significantly the highest BFS, followed by K/LV. BFS of K/CZR, K/EM and K/VT were not significantly different from each other, but were significantly lower than the other two groups. Weibull distribution reported the same trend of reliability as the BFS results. CONCLUSION. From the result of this study, the BFS of the bilayered zirconia/veneer composite did not only depend on the Young's modulus value of the materials. Further studies regarding interfacial strength and sintering factors are necessary to achieve the optimal strength.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.510-519
• /
• 2001

The tensile and fracture toughness tests have been conducted to investigate the degradations of mechanical properties induced mainly by neutron irradiations in Zr-2.5Nb CANDU pressure tube materials operated in Wolsung Unit-1. the tests were performed at room, 150, 200, 250, 300 $\^{C}$ for the irradiated and unirradiated specimens in hot cell. The specimens were directly machined from the tube retaining original curvature using specially designed electric discharge machine(EDM). From the tensile tests of the irradiated specimens, it was found that tensile strength was increased and total elongation was decreased compared to those of the unirradiated ones. The active voltages in the fracture toughness tests for the irradiated showed the discontinuous abrupt increases caused by crack jumping in lower temperature. In the crack resistance curves we found the stable crack growth in the unirradiated, whereas the unstable and three crack growth stages in the irradiated specimens due to the accumulated irradiation defects. The various fracture characteristic values in the irradiated are remarkably lower than those of the unirradiated. Through the fractography, we found in the irradiated that smaller dimple and shorter fissures than the unirradiated, and that the fractured surface had three regions that were flat, transition and slant/shear area. These can explain the difference in the crack growth characteristic values of the irradiated and the unirradiated ones.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.61-75
• /
• 1997

The social demand urges us to use some equipments and structures in high temperature environment. By this occasion, the necessity of studying the fatigue crack growth is an important aspect of new materials. However, the present situation is rarely to accumulate the fatigue data. Especially, 1Cr-1Mo-0.25V steel and 304 stainless steel have been increased to be used under the severe condition of high temperature. And so, the fatigue estimation of those materials is important and appropriate. Fatigue tests have been carried out to examine the crack initiation, growth behaviour for the small fatigue crack of 1Cr-1Mo-0.25V steel and 304 stainless steel at room temperature and 538^{\circ}C$. The remote measurement system which has many merits of checking and saving the image for detailed examination was applied to closely detect the crack length. Generally, the fatigue crack initiated in the form of multiple cracks and grew each other. And then it coalesced to become a major crack. The major crack governed the rest of the fatigue life. In the growing process, each peripheral cracks interact and grow for a certain period. After then, it coalesced and fractured. On the basis of the above experimental data for the small crack, a simulation program was developed to predict the residual life time and to estimate the integrity of machine elements and structures. At the same time, the simulation was extended to 1Cr-1Mo-0.25V steel. The simulation results have shown a good agreement to those of the experimental ones for both materials of 1Cr-1Mo-0.25V steel and 304 stainless steel with small cracks. The NASCRAC has applied to compare the fatigue life with the experimental results. And so, it can be said that the simulation program is valuable tools to the industrial fields.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.251-258
• /
• 2020

PURPOSE. The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and CAD/CAM purposed materials were evaluated to find influence of each material. MATERIALS AND METHODS. Cylindrical rods (6.0 mm diameter × 8.0 mm length) prepared from pre-polymerized CAD/CAM denture base resin blocks (PMMA Block-pink; Huge Dental Material, Vipi Block-Pink; Vipi Industria) were bonded to the basal surface of resin teeth from three different companies (VITA MFT^®; VITA Zahnfabrik, Endura Posterio^®; SHOFU Dental, Duracross Physio^®; Nissin Dental Products Inc.) using resin cement (Super-Bond C&B; SUN MEDICAL). As a control group, rods from a conventional heat-polymerizing denture base resin (Vertex™ Rapid Simplified; Vertex-Dental B.V. Co.) were attached to the resin teeth using the conventional flasking and curing method. Furthermore, the effect of air abrasion was studied with the highly cross-linked resin teeth (VITA MFT^®) groups. The shear bond strengths were measured, and then the fractured surfaces were examined to analyze the mode of failure. RESULTS. The shear bond strengths of the conventional heat-polymerizing PMMA denture resin group and the CAD/CAM denture base resin groups were similar. Air abrasion to VITA MFT^® did not improve shear bond strengths. Interfacial failure was the dominant cause of failure for all specimens. CONCLUSION. Shear bond strengths of CAD/CAM denture base materials and resin denture teeth using resin cement are comparable to those of conventional methods.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.597-602
• /
• 2015

고장력 Cr-Mo강은 이온질화와 연질화 두가지 질화처리를 수행하였다. 각 질화처리의 특징을 비교하기 위해서 30분의 공정시간을 가지고 질화처리를 하였다. 표면강도의 변화를 비교하기 위해서 비커스 경도 시험이 수행되었으며 피로시험은 켄틸레버 회전굽힘 피로시험기(Yamamoto, YRB 200)를 이용하여 수행되었다. 초고주기영역($N>10^7cycle$)의 특징을 알아보기 위해서 피로시험은 피로한도 이후까지 진행하였다. 피로 시험 후 주사전자현미경(SEM)을 이용해서 파단면을 분석하였으며 고주기영역과 초고주기 영역의 파괴기구를 관찰하였다.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.81-91
• /
• 2008

The weldability of resistance spot welding of TRIP1180 steels for automobile components investigated enhance in order to achieve understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP1180 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the spot welded samples, the load-carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface also, dimple fracture areas were drawmatically increased with heat input which is propotional to the applied weld current. In spite of the high hardness values associated with the martensite microstructures due to high cooling rate. The high load-carrying ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP1180 steels, the load-carrying capacity of the weld should be considered as an important factor than fracture mode.

• 한국진공학회지
• /
• 제17권5호
• /
• pp.442-447
• /
• 2008

강유전체 0.65Pb$(Mg_{1/3}Ta_{2/3})O_3-0.35PbTiO_3$ 고용체에 $Ag_2O$를 첨가하여 $1200^{\circ}C$에서 소결하여 시료를 제작하였다. 완성된 시료의 미세구조는 주사 전자현미경(SEM)을 이용하여 관찰하였고, 전기적 특성의 관찰을 위하여 유전상수와 유전손실, 초전계수를 측정하였다. 제작된 시료 중에서 0.2 mol%의 $Ag_2O$를 과잉 첨가한 시료에서 유전상수와 초전계수가 가장 크게 나타났다. 각 시료에서 유전상수와 초전계수의 최대값의 온도는 $Ag_2O$ 첨가량이 증가할수록 저온으로 이동하였다.