• Journal of Ocean Engineering and Technology
• /
• v.25 no.3
• /
• pp.66-72
• /
• 2011

This is the fourth of a series of companion papers dealing with the mechanical property reductions of various marine structural steels. Even though a reduction of the elastic modulus according to temperature increases has not been obtained from experiments, high temperature experiments from room temperature to $900^{\circ}C$ revealed that initial the yield strength and tensile strength are both seriously degraded. The mechanical properties obtained from high temperature experiments are compared with those from EC3 (Eurocode 3). It is found that the high temperature test results generally comply with the prediction values by EC3. Based on the prediction of EC3, time domain nonlinear finite element analyses were carried out for a blast wall installed on a real FPSO. After applying the reduced mechanical properties, corresponding to $600^{\circ}C$ to the FE model of the blast wall, more than three times the deflections were observed and it was observed that most structural parts experience plastic deformations exceeding the reduced yield strength at the high temperature. It is noted that a protection facility such as PFP (passive fire protection) should be required for structures likely to be directly exposed to fire and explosion accident.

• Journal of Trauma and Injury
• /
• v.18 no.1
• /
• pp.64-69
• /
• 2005

Purpose: We report the radiologic and the clinical results for surgical treatment of calcaneal fractures involving the subtalar joint. Methods: We evaluated the findings of radiographs and computed tomographs of 39 patients (40 cases) with intra-articular calcaneal fractures. The fractures were treated with open reduction via an extended lateral approach and internal fixation using a plate. We assessed the radiologic results, such as the $B{\ddot{o}}hler$ angle, the Gissane angle, and the height/width ratio. We assessed the clinical results based on the critieria of Salama et al. Results: According to the Essex-Lopresti classification, 9 cases were classified as tongue type and 31 cases as joint depression type. According to the Sanders classification, 10 cases were classified as type IIA, 4 cases as IIB, 16 cases as IIIAB, 4 cases as IIIAC, and 6 cases as type IV. The mean preoperative $B{\ddot{o}}hler$ angle was 7.7, the mean postoperative $B{\ddot{o}}hler$ angle was 21.1, and the mean last follow-up $B{\ddot{o}}hler$ angle was 16.8. Clinical results classified as 10 excellent, 13 good, 11 fair, and 6 poor. Conclusion: In the treatment of intra-articular fractures of the calcaneus, open reduction via an extended lateral approach seems to be a useful method in that it can provide direct exposure of the subtalar joint with little morbidity.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2006

Fretting fatigue behavior of SCM420 steel commonly used in the automotive industry for structural applications was investigated in this study. In addition, the effect of bridge pad on the fretting fatigue test was evaluated from different pad materials and following conclusions were drawn. Simple fatigue limit of SCM 420 steel was determined to be 350 MPa while this value was 225 MPa and 285.5 MPa with SCM420H and with SM45C pad, respectively. Reduction in fatigue limit was, thus found to be 35.7% and 17.9% with SCM 420H pad and SM45C pad, respectively. Results of fracture surface observation revealed that typical striation pattern of fatigue failure existed as well as dimpled and cleavage frature appearance was found in final fractured region. From the EDS compositional analysis, test sample and pad part all had high signals for oxygen and iron, suggesting that worn particles might be iron oxide, although exact chemical composition has to be confirmed. Considerable reduction in fatigue life was apparent in SCM 420 steel under fretting fatigue against simple fatigue. Such reduced fatigue life by fretting damage should be considered as an important factor not only in the viewpoint of repairing but also inevitably in the design stage of structural components.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.17-22
• /
• 1988

Fractures of the femoral neck in children are rare and usually the result of severe trauma. The femoral necks in children, in contrast to those of adults, have many anatomic and physiologic differences. Among the late complications encountered are avascular necrosis, coxa vara, premature closure of the proximal capital femoral epiphysis and nonunion. In spite of careful management, significant complication rate often results. Nine cases of fractures of the femoral neck in children which were treated at Yeungnam University Hospital from June 1984 to August 1987 were reviewed. The results obtained are as follows: 1. The main causes of fractures were traffic accidents(5 cases). 2. Among 9 patients, 6 were girls and 3 were boys. 3. According to the classification of Delbet and Colonna, the transcervical fracture(6 cases) was the commonest type. 4. 4 cases were treated by closed reduction and internal fixation, 3 cases were treated by open reduction and internal fixation. 2 cases were treated by skin traction and cast. 5. The results were analyzed according to Ratliff's assessment. 6 cases showed good results, and 3 cases showed poor results. 6. Early diagnosis and good fixation method seemed to be vital to prognosis.

• Geomechanics and Engineering
• /
• v.12 no.4
• /
• pp.723-738
• /
• 2017

Rock is a heterogeneous material, which introduces complexity in the analysis of rock slopes, since both the existing discontinuities within the rock mass and the intact rock contribute to the degradation of strength. Rock failure is often catastrophic due to the brittle nature of the material, involving the sliding along structural planes and the fracturing of rock bridge. This paper proposes an advanced discretization method of rock mass based on block theory. An in-house software, GeoSMA-3D, has been developed to generate the discrete fracture network (DFN) model, considering both measured and artificial joints. Measured joints are obtained from the photogrammetry analysis on the excavation face. Statistical tools then facilitate to derive artificial joints within the rock mass. Key blocks are searched to provide guidance on potential reinforcement measures. The discretized blocky system is subsequently implemented into a discontinuous deformation analysis (DDA) code. Strength reduction technique is employed to analyze the stability of the slope, where the factor of safety can be obtained once excessive deformation of slope profile is observed. The combined analysis approach also provides the failure mode, which can be used to guide the choice of strengthening strategy if needed. Finally, an illustrated example is presented for the analysis of a rock slope of 20 m height inclined at $60^{\circ}$ using combined GeoSMA-3D and DDA calculation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.32-38
• /
• 2005

The efficacy of bioresorbable fixation has recently been described in the osseosynthesis of the oral & maxillofacial region. However, a liitle data exist regarding the use of biodegradable plates and screws for the internal fixation of human mandible fractures. The purpose of this study is to analyze and compare the treatment of mandibular fractures by using a bioresorbable fixation system with conventional titanium system in human mandible fractures. eighteen patients constituted the bioresorbable fixation group and twenty-five patients constituted the titanium fixation group. Both groups underwent open reduction and internal fixation by use of a bioresorbable system or a titanium fixation system. Panoramic radiograph were obtained preoperatively, immediately postoperatively after reduction, at 6 months and at 12 months postoperatively. In the bioresorbable fixation group, complication(infection) occurred in 1 patient(5.6%) and was resolved by incision & drainage, plate removal and antibiotics without untoward sequelae. 2 patients(8.0%) experienced complications in the titanium fixation group and were treated using conservative treatment. There was no statistical difference in complication rates between two groups. Our data supported the use of bioresorbale plate fixation in mandibular fractures as a means of avoiding the potential and well documented problems with rigid titanium fixation systems. In conclusion, the bioresorbable fixation system provide a reliable and sufficient alternative to conventional titanium plate system.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.1
• /
• pp.91-100
• /
• 1990

In most of the structural members with initial cracks(or initial notches), the strength tends to decmase as the member size increases. This phenomenon is known as size effect. Among the structural materials of glass, metal or concrete, etc., concrete represents the size effect even without initial crack. According to the previous size effect law, the concrete mem¬ber of very large size can resist little stress. Actually, however, even the large size member can resist some stress if there is no initial crack made artificially, consequently showing a rather milder strength reduction compared to the severe strength reduction by tbe previously derived size effect law. In this study, the theoretical size effect law previously derived by Z.P. Bazant was discussed based on nonlinear fracture mechanics of concrete structures With dissimilar initial cracks, and the prediction models are proposed by regression analysis with the existing test data of more large size speciments for splitting tensile strength, shear strength and uniaxial compressive strength tests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1989

The stress history of a bridge is different depending on the characteristic of traffic flow. Because the flow is varied with vehicle type, weight and headway time etc., statistical analysis in bridges is necessary to estimate the history by traffic flow. By applying the statistical analyses in fracture mechanics, the remaining service life of the structure can be estimated. In this paper, 1)the statistical analysis of vehicle type, weight and headway time etc. to analysis randomness of traffic flow, 2)measuring and analysis of stress history of a real bridge, 3)reappearance of stress history by Monte-Carlo Simulation using constitution ratio of vehicle type, weight and headway time as probabilitic variable, 4)comparision of the calculated and modelled stress history, 5)calculation of reduction factor, 6)comparision of frequency of stress range depending on span length etc. were performed. From the results, the basic modelled stress history which is necessary for the method of estimation of the remaining service life of the structure could be suggested.

• Journal of Veterinary Clinics
• /
• v.11 no.1
• /
• pp.369-376
• /
• 1994

The purpose of this report Is to discribe the radiological findings of traumatic elbow luxation and subluxation of carpal joint which were caused by being hit by a wild animal and forced hyperextension of carpus in two hunting dogs. In case 1, carniocaudal and mediolateral radiographic examination of the elbow joint revealed that the radius that the radius and ulna were completely luxated laterally. The lateral projection showed the humeral condyles overlying the radial head with an absent joint space, but displacement is apparent on the craniocaudal projection. Incidence of collateral ligament rupture in conjunction with elbow luxation was not recognized on physical examination of the limb after closed reduction. Radiographic examination of the elbow made 5 months after closed reduction revealed only mild degenerative joint disease. Radiographic examination of the carpus in case 2 demonstrated palmar subluxation of most carpal joints including antebrachiocarpal, mediocarpal carpometacarpal joints, and some intercarpal joints, and avulsion fracture of the palmar surface of the accessory carpal bone. However, the mediocarpal and carpometacarpal joints were most severely affected by tensile forces of hyperextension, and it was concluded that the ligaments of the middle ca,pal joints and carpometacarpal joints as well as the palmar fibrocartilage were ruptured based on clinical and radiographic findings. In elbow luxation and subluxation of carpal Joints of the dog, differentiation of the joint or joints involved, and ligamentous structures damaged is important in determining whether surgery Is necessary and which procedure is most appropriate. And the radiographic findings of these conditions would be of help to practitioners.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.2
• /
• pp.128-131
• /
• 2013

Transforaminal lumbar interbody fusion (TLIF) is commonly used procedure for spinal fusion. However, there are no reports describing anterior cage dislodgement after surgery. This report is a rare case of anterior dislodgement of fusion cage after TLIF for the treatment of isthmic spondylolisthesis with lumbosacral transitional vertebra (LSTV). A 51-year-old man underwent TLIF at L4-5 with posterior instrumentation for the treatment of grade 1 isthmic spondylolisthesis with LSTV. At 7 weeks postoperatively, imaging studies demonstrated that banana-shaped cage migrated anteriorly and anterolisthesis recurred at the index level with pseudoarthrosis. The cage was removed and exchanged by new cage through anterior approach, and screws were replaced with larger size ones and cement augmentation was added. At postoperative 2 days of revision surgery, computed tomography (CT) showed fracture on lateral pedicle and body wall of L5 vertebra. He underwent surgery again for paraspinal decompression at L4-5 and extension of instrumentation to S1 vertebra. His back and leg pains improved significantly after final revision surgery and symptom relief was maintained during follow-up period. At 6 months follow-up, CT images showed solid fusion at L4-5 level. Careful cage selection for TLIF must be done for treatment of spondylolisthesis accompanied with deformed LSTV, especially when reduction will be attempted. Banana-shaped cage should be positioned anteriorly, but anterior dislodgement of cage and reduction failure may occur in case of a highly unstable spine. Revision surgery for the treatment of an anteriorly dislodged cage may be effectively performed using an anterior approach.