• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.447-452
• /
• 2017

PURPOSE. To evaluate the sealing performance of Hybrid Coat and its influence on the shear bond strength of five dentin surface cements. MATERIALS AND METHODS. Six premolars were pretreated to expose the dentin surface prior to the application of Hybrid Coat. The microscopic characteristics of the dentinal surfaces were examined with scanning electron microscopy (SEM). Then, 40 premolars were sectioned longitudinally, and 80 semi-sections were divided into a control group (untreated) and a study group (treated by Hybrid Coat). Alloy restoration was bonded to the teeth specimen using five different cements. Shear bond strength was measured by the universal testing machine. The fracture patterns and the adhesive interface were observed using a stereomicroscope. RESULTS. SEM revealed that the lumens of dentinal tubules were completely occluded by Hybrid Coat. The Hybrid Coat significantly improved the shear bond strength of resin-modified glass ionomer cement (RMGIC) and resin cement (RC) but weakened the performance of zinc phosphate cement (ZPC), zinc polycarboxylate cement (ZPCC) and glass ionomer cement (GIC). CONCLUSION. Hybrid Coat is an effective dentinal tubule sealant, and therefore its combined use with resin or resin-modified glass ionomer cements can be applied for the prostheses attachment purpose.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.310-319
• /
• 2012

In this study, 1,495 cases of computerized data collected as disease entities of oral and maxillofacial injuries among patient visiting S university hospital located in Seoul in 2009 were analyzed and following results were obtained. It was found that the injury incidence in male was greater than in female (1.49:1), it occurred most frequently in the age of 7~14 years old (19.6%), and its most frequent cause was falling down (25.9%). Injuries occurred in other place including beach and open-air (24.7%) most frequently, often developed in anterior teeth (43.2%) and posterior teeth (43.1%), their incidence was relatively higher between 15:00~17:00 (10.4%) and 19:00~23:00 (7.1%) O'clock. In the relationship between causes of the injury and the diagnosis based on the international classification of disease), falling, fall, impingement, violence, traffic accident, sports and own making accident caused most frequently lip and oral open injuries (S01.5), open fracture of tooth (S02.51), close fracture of tooth (S02.50), close fracture of mandible (S02.60), close fracture of tooth (S02.50), respectively. From the above results, it is necessary to understand general characteristics of oral and maxillofacial injuries and to consider their trends for the establishment of systematic complement policies and for the performing safety training and public relations activities.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.5
• /
• pp.757-767
• /
• 2017

Objectives: The purpose of this study is to identify the associated factors with subjective oral symptoms experience of obesity adolescents. Methods: The study subjects were targeting 8,139 obesity adolescents and 55,601 non-Obesity adolescents who completed 2016 Korean Youth Risk Behavior Web-based survey. Dependent variables were subjective oral symptoms experiences of fracture teeth, pain, throbbing pain, periodontal pain & bleeding, mucosal disease and bad breath. Independent variables were demographic characteristics of the subjects, oral health behaviors, health behaviors and eating habits. Results: Obesity adolescents were 12.8% with 61.9% subjective oral symptoms experience. Regarding the related factors of subjective oral symptoms experience of obesity adolescents, the factors were identified to be significantly higher in high school (OR=1.72) compared to middle school, learning achievement was higher in middle (OR=1.09) and lower (OR=1.31) compared to high, economic status was higher in lower (OR=1.09) compared to high, sealant experience (OR=1.10) and scaling experiences (OR=1.12) responded no were higher compared to responded yes, smoking experiences responded yes(OR=1.08) were higher compared to responded no, sweet drink (OR=1.14) and fastfood (OR=1.13) consumption were higher in consumption compared to non-consumption and females (OR=0.46) were higher than males. Oral symptoms experience were lower that father and mother's level of education were under high school graduation (OR=0.86) compared to unknown, economic status was in case of middle (OR=0.93) compared to high, tooth brushing was lower in under 1 time (OR=0.76), 2 times (OR=0.61) compared to more than 3 times, vigorous physical activities responded no (OR=0.75) were lower, compared to yes, vegetable consumption was lower in non-consumption (OR=0.68) compared to consumption. Conclusions: Subjective oral symptoms experiences were identified higher in obesity adolescents than non-obesity adolescents. It would be useful to use the results of this study to reduce oral symptoms and necessary to develop a program system considering characteristics of obesity adolescents.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.319-324
• /
• 2003

Statement of problem. Adhesives in dentistry playa major role in the success of restorative treatments. In the treatment of all ceramic restoration it is needed to find the adequate bond strength between enamel and dentin. Purpose. The purpose of this study was to evaluate shear bond strength of resin cement bonded to extracted human uncut enamel, cut enamel, and dentin in vitro. Material and methods. Ten freshly extracted anterior teeth without any previous restorative treatments were chosen. The extracted teeth were embedded in PMMA cold acrylic in the shape of a cylinder, 25 mm in diameter by 25 mm in height. The bonding system used was as follow: Uni-Etch (32% phosphoric acid), One-Step adhesive, Duolink resin cement. The specimens were acid etched and rinsed with water. Two layers of One-Step adhesive were coated with a disposable brush on the uncut enamel. VIP curing light at $500mV/cm^2$ was used to cure the adhesive. For cut enamel shear bond test, the specimen used for uncut enamel was further reduced approximately $0.3{\sim}0.5mm$ using a laminate preparation diamond bur (0.3 mm in depth). The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit SiC paper and cleaned with distilled water. The bonding procedure on the cut enamel was same as uncut enamel bonding procedure. For dentin bonding test, the specimen used for cut enamel was further reduced approximately $0.5mm{\sim}1.0mm$ using a laminate preparation diamond bur (0.5 mm in depth of diamond cutting). The amount of reduction was evaluated with the silicone mold. The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit silicon carbon paper and cleaned in distilled water. The bonding procedure on the dentin was same as uncut enamel bonding procedure. All samples were mounted and secured on the Ultradent shear bond test sample holder, and Ultradent restricted shear bond testing device was used with Universal Instron machine until fracture. Analysis of variance (ANOVA) test was performed comparing the result at P<0.05. Multiple comparison (Tukey) was used to compare each groups. Result. The result showed that the mean value in shear bond strength of resin cement bonded to uncut enamel, cut enamel and dentin were 27.04 Mpa, 30.25 Mpa and 26.39 Mpa with respect. Conclusion. Within the limitation of this study, the mean value of the shear bond strength of cut enamel was higher than those of uncut enamel or dentin. However there existed no statistical differences between three different human dentition substrates due to increased adhesive characteristics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.295-300
• /
• 2009

Statement of problem: As the number of elders is growing with the advancement of medicine, partially or fully edentulous patients have increased. Medically compromised conditions are common in the older population so that it should be taken into account in prosthetic treatment planning as well as their economic conditions. In the older patients, removable prosthesis has been preferred to implant prosthesis. However, cast metal based removable partial dentures also has several limitations. Purpose: In this report, we present several cases of Valplast$^{(R)}$ flexible denture which were fabricated in patients who had medically compromised conditions or whose remaining teeth showed a relatively poor prognosis. Results & Conclusion: This article describes an alternative treatment for a partially edentulous patient with mouth opening limitation, after cancer surgery, compromised general condition and questionable remaining teeth. In these patients, Valplast$^{(R)}$ flexible denture was used because of its unique characteristics and the results were all satisfactory. Patients had 1-2 check-up and there were no postoperative pain or fracture of denture up to now.

• Restorative Dentistry and Endodontics
• /
• v.26 no.6
• /
• pp.464-484
• /
• 2001

When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)