• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.14-22
• /
• 2007

In this paper, the acoustic emission(AE) behaviors were investigated with single-and 2-spot resistance spot welded SPCC specimens. Test specimens were welded horizontally and/or vertically according to the rolling direction of base netal in 2-spot welding. In the case of 2-spot welding, when tensile-shear test has below amplitudes: crack initiation $50{\sim}60dB;$ tear fracture $40{\sim}50dB$. And when cross tensile test has below amplitudes: early stage $75{\sim}85dB;$ yielding point $65{\sim}75dB;$ post yielding $40{\sim}60dB;$ plug fracture $70{\sim}80dB\;or\;90{\sim}100dB$. Also, from the b-value that is slope of AE amplitude, we knew that there are lots of low amplitudes if b-value is big(i.e., tensile-shear $specimen{\rightarrow}tear$ fracture or shear fracture), and there are lots of high amplitudes if b-value is small(i.e.. cross tensile $specimen{\rightarrow}plug$ fracture). As the results of fiacture mechanism analyses through AE amplitude distributions, change of the b-value represented fracture patterns of materials. Correspondingly, low amplitude signals appeared in crack initiation, and high amplitude signals appeared in base metal fracture. We confirmed that these amplitude distributions represented the change or degradation of materials.

• 지질공학
• /
• 제11권3호
• /
• pp.279-294
• /
• 2001

지하구조물 건설시에 구조물의 안정성을 확보하거나 우물을 굴착할 때 충분한 양의 지하수를 확보하기 위해서는 정확한 수리적 매개변수를 알아내는 것이 필수적이다. 본 연구에서는 금정산 화강암지역에 시추된 6개 시험공의 여러 심도에서 수압시험을 실시하고, Moye식과 Hvorslev식을 이용하여 수리전도도를 구하였다. 또한 수리전도도와 텔레뷰어검층 및 시추코어자료로부터 얻어진 단열빈도를 서로 비교하고, 이들간의 상관성을 구하였다. 그 결과, 대부분의 시험공에서 텔레뷰어 자료가 시추코어자료보다 수리전도도와의 상관성이 높으나, 상관계수는 0.5미만이다. 이것은 연구지역 화강암의 수리전도도가 단열빈도뿐만 아니라 단열의 간극, 길이, 연결성, 방향, 경사도 그리고 충전물 등과도 복합적으로 관련됨을 암시한다.

• 한국주조공학회지
• /
• 제34권5호
• /
• pp.170-178
• /
• 2014

Using the Gleeble test, the effects of [Mn/S] ratios and the presence of sulfides on the high-temperature fracture morphology of heavy-section steel castings were analysed via the observations of the microstructures. The specimens for which the [Mn/S] ratio was in the range of 60~80 showed a ductile fracture morphology with an area reduction of more than 60%, while some specimens with similar [Mn/S] ratios showed a brittle fracture morphology with an area reduction of 0.0% due to the liquidation of sulfides at the grain boundary. The fracture morphology was classified into three types in the Gleeble high-temperature tensile test specimens. The first type showed dimple formation at the grain boundary, the formation of globular MnS sulfides, and plastic deformation of sulfides at an elevated temperature, indicating a needle-point type of ductile fracture with area reductions of 96.0~97.8%. The second type was a knife-edge type brittle fracture with an area reduction of 0.0% due to the film-type liquidation of sulfides at the grain boundary, band-type liquidation, and the liquidation of a terraced nipple pattern. The third type was the typical ductile fracture with an area reduction of 31.3~81.0%, in accordance with the mixture of dimples with in the grains and terraced nipple pattern at the grain boundary.

• 한방재활의학과학회지
• /
• 제34권2호
• /
• pp.1-14
• /
• 2024

Objectives The purpose of this study is to evaluate the fracture healing effect of extracts from Cnidium officinale and Angelica sinensis (CO/AS) in mice with femoral fracture. Methods C57BL/6 mice were randomly divided into normal, control (phospate-bufferd saline), positive control (tramadol), CO/AS extract 40 mg/kg and 80 mg/kg. By using Collier's method, all groups except normal group went through femoral fracture. Aspartate aminotransferase (AST), alanine transferase (ALT), lactate dehydrogenase (LDH), blood urea nitrogen (BUN) and creatinine were measured to evaluate the safety of CO/AS. Hematoxylin & eosin, Safranin O staining, x-ray, tensile and compressive force were conducted to assess the effect of CO/AS on fracture. Results The liver function test showed AST, ALT and LDH in CO/AS at 14th and 28th days were not significantly different compared with control group. The renal function test showed BUN in CO/AS at 14th days and BUN and creatinine in CO/AS at 28th days were significantly decreased compared with control group. The morphological & histological analysis and x-ray showed that CO/AS promoted cartilage and callus formation process compared with control group. The tensile and compressive forces test showed tensile in CO/AS 40 mg/kg and tensile & compressive forces in CO/AS 80 mg/kg were significantly increased compared with control group. Conclusions CO/AS extract showed the possibility that it promotes early fracture union and increases bone tensile and compressive strength, while does not have hepatotoxicity. In conclusion, CO/AS has a potential to promote healing of bone fracture and this study warranted the clinical usage of CO/AS at bone fracture.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.167-174
• /
• 1994

The creep behavior and creep fracture of alumina at high temperature were investigated under four point flexural test. The steady-state creep behavior was observed at low bending stress and the primary creep until fracture was observed at high bending stress. The loading history of bending stress did not affect on the steady-stated creep rate. Intergranular fracture was dominant for fracture of alumina at room and high temperature. However, transgranular fracture was dominant on creep fracture of alumina under high temperature by nuclueation and growth of microcracks due to residual flaws or cavities in the material.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.543-551
• /
• 1994

The creep behavior and creep fracture of sintered alumina at high temperature were investigated under four point flexural test. Steady-state creep behavior was observed at low bending stress and primary creep until fracture was observed at hish bending stress. The loading history of bending stress did not affect on steady-state creep rate. Intergranular fracture was dominant for fracture of alumina at room and high temperature. However, transgranular fracture was dominant on creep of alumina under high temperature by nucleation and growth of microcracks due to residual flaws or cavities in the material.

• Advances in concrete construction
• /
• 제9권2호
• /
• pp.173-181
• /
• 2020

Fracture properties of concrete depend on the mix proportions of the ingredients, specimen shape and size, type of testing method used for the evaluation of fracture properties. Aggregates play a key role for changes in the fracture behaviour of concrete as they constitute about 60-75 % of the total volume of the concrete. The present study deals with the effect of size and quantity of coarse aggregate on the fracture behaviour of steel fibre reinforced self compacting concrete (SFRSCC). Lower coarse aggregate and higher fine aggregate content in SCC results in the stronger interfacial transition zone and a weaker stiffness of concrete compared to vibrated concrete. As the fracture properties depend on the aggregates quantity and size particularly in SCC, three nominal sizes (20 mm, 16 mm and 12.5 mm) and three coarse to fine aggregate proportions (50-50, 45-55, 40-60) were chosen as parameters. Wedge Split Test (WST), a stable test method was adopted to arrive the requisite properties. Specimens without and with guide notch were investigated. The results are indicative of increase in fracture energy with increase in coarse aggregate size and quantity. The splitting force was maximum for specimens with 12.5 mm size which is associated with a brittle failure in the pre-ultimate stage followed by a ductile failure due to the presence of steel fibres in the post-peak stage.

• 수산해양교육연구
• /
• 제9권2호
• /
• pp.188-197
• /
• 1997

The fracture toughness of three different kinds of epoxy-matrix composites containing the same volume fraction of reinforcement and the variation of fracture toughness of glass-carbon fiber/epoxy hybrid composites due to the change of test temperature and different glass fiber content were investigated in this study. Glass fiber/epoxy composite provided much higher fracture toughness than that of other composites because of the high strain at failure of glass fiber. Particularly the carbon fiber/epoxy composite exhibited the low fracture toughness caused by the low strain energy absorbing capacity of carbon fiber. And it was found that the strain at failure of reinforcement and interfacial delamination absorbing a significant amount of impact energy played an important role to increase fracture toughness of composites. The fracture toughness of the glass-carbon fiber hybrid composites increased with increasing the glass fiber content and decreased with raising the test temperature. The residual stress arising from the different thermal expansion between the matrix and reinforcement influenced the fracture toughness of composites.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.129-137
• /
• 2000

본 논문은 통계적 기법에 의한 균열망 해석 프로그램(NAPSAC)을 사용하여 암반의 수리특성을 평가하기 위해 시도되었다. 암반내 존재하는 절리의 방향성을 고려한 투수계수를 산정하기 위해 마북리 시험터널 주위의 시추자료와 막장 자료로부터 얻어진 균열에 대한 정보로부터 대상지역의 등가 투수계수를 추정하였다. 대상지역의 관찰자료(균열망에 대한 자료, 수리지질학적 자료)로부터 통계적 균열망 해석을 위한 입력자료를 결정하여 해석모델의 신뢰성을 확보하였다. 구현된 모델로부터 모델의 크기를증가함에 따라서 이방성 투수계수 및 투수계수의 변화를계산하였다. 해석결과대상지역의 투수성은 균열군의 방향성에 의해 강한 이방성을 보였다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.378-386
• /
• 2000

본 논문은 통계적 기법에 의한 균열망 해석 프로그램 (NAPSAC)을 사용하여 암반의 수리특성을 평가하기 위해 시도되었다. 암반내 존재하는 절리의 방향성을 고려한 투수계수를 산정하기 위해 마북리 시험터널 주위의 시추자료와 막장 자료로부터 얻어진 균열에 대한 정보로부터 대상지역의 등가 투수계수를 추정하였다. 대상지역의 관찰자료 (균열망에 대한 자료, 수리지질학적 자료 )로부터 통계적 균열망 해석을 위한 입력자료를 결정하여 해석모델의 신뢰성을 확보하였다. 구현된 모델로부터 모델의 크기를 증가함에 따라서 이방성 투수계수 및 투수계수의 변화를 계산하였다. 해석결과 대상지역의 투수성은 균열군의 방향성에 의해 강한 이방성을 보였다.