• 대한지하수환경학회지
• /
• 제4권2호
• /
• pp.61-72
• /
• 1997

임해지역에서의 지하수 이용 및 지하공동 건설시 육지부 대수층으로의 해수침투가 문제될 수 있으며, 지하수질의 저하 또는 지하공동내의 시설부식을 초래할 수 있다. 본 연구는 임해지역의 지하공동시설 주변 지표수와 지하공동내 유입수에 대한 수질 분석과 환경동위원소 분석, 그리고 지하공동과 해안사이에 위치하는 수직수벽공에서의 심도별 수리특성조사와 수리간섭시험 등을 통하여 해수침투 현상을 규명하고, 이를 수리지질학적 관점에서 해석하였다. 육지부가 자유면대수층 조건일 때 이론적인 담수-해수체 경계면과 연구지역에서 확인된 해수침투경로와는 상당한 차이가 있었다. 지하공동으로 침투하는 해수의 주 경로는 해수체와 연결되는 sub-horizontal 단열대인 것으로 해석되었다. 임해지역에서 준평형 상태의 지하수체계에 변화를 초래하는 인위적 행위로 인하여 담수-해수체 경계면에 영향을 미치는 가장 큰 요인은 해수체와 연결되는 투수성 단열대의 분포특성이다.

• 한국동물위생학회지
• /
• 제33권3호
• /
• pp.313-317
• /
• 2010

This study was conducted in the saltwater crocodile (Crocodylus porosus) for the occurrence of various surgical affections with their clinical management. During the period of January 2006 to June 2008, a total of 68 adult crocodiles were considered as reference population from the Reptiles Farm Ltd. at Bhaluka, Mymensingh. The occurrence of surgical affections of adult female (88.9%) was significantly (P<0.01) higher than male (11.1%). Prevalence of common surgical affections were wound: 72.2%, fibroma: 11.1% abscess: 5.6%, fracture: 5.6%, tail necrosis: 2.8%, myiasis: 2.8%. Wound was the highest among the affections. Among the identified wounds, biting wound was higher. In summer (57.7%) the occurrence of wound was higher compared to other seasons. In winter season (7.7%) the occurrence of abscess, myiasis, fibroma were higher compared to other seasons. Wounds and fibroma are the major surgical affections in salt water crocodile. The most common site of surgical affection was recorded in crocodile's tail (30.6%). It was suggested that minimal stress, allowing constant and easy access to water, removal of roots of the tree in the basking land of crocodiles pen, basking land of the pen is better filling up by sand, clinical surgical managements are essential for better health and production.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.713-724
• /
• 2004

거동이 복잡한 실제 구조물의 사용하중으로 인한 피로 균열 해석 방법을 제시하기 위해 구 당산철교 플레이트교 세로보에 발생한 피로균열을 대상으로 하여 사용 기간에 따른 피로균열의 길이를 계산하였다. 계산의 편리와 컴퓨터의 계산 용량 등을 고려하여 특정 부분만 정밀하게 해석하였고, 구조해석의 오차와 열차의 운행 하중 등을 고려하기 위해 여러 보정계수를 사용하였다. 상부구조 1개 경간을 보요소로 모델링하여 열차 통과로 인한 세로보의 거동 이력을 해석하였으며, 세로보 연결부의 플랜지가 절취된 곳에 집중된 응력을 구하기 위하여 세로보 한 개를 쉘요소로 모델링하여 정밀해석을 수행하였다. 피로균열의 진행은 파괴역학적 모델을 사용하여 계산하였으며, 응력확대계수는 유한요소해석 방법으로 J-Integral를 구하여 환산한 값을 사용하였다. 가정한 초기균열의 크기와 균열 진행속도 계산식에 따라 차이는 있으나 계산된 피로균열의 길이는 현장에서 조사된 피로균열길이에 잘 부합되는 것으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.350-352
• /
• 2009

The effect of porosity on the high-cycle fatigue properties of Al-Si-Mg casting aluminum alloys was investigated in this study. Microstructure examination, tensile and high-cycle fatigue test were conducted on both Al-Si-Mg casted (F) and heat-treated (T6) conditions. Porosity characteristics on the fracture surfaces of fatigue-tested samples were examined using SEM and image analysis. The microstructure observation results showed that eutectic Si particles were homogeneously dispersed in the matrix of the Al-Si-Mg casting alloys, but there were porosities formed as cast defects. The high-cycle fatigue results indicated that the fatigue strength of the 356-T6 alloy was higher than that of the 356-F alloys because of the significant reduction in volume fraction of pores by heat treatment. The SEM fractography results showed that porosity affected detrimental effect on the fatigue life: 80% of all tested samples fractured as a result of porosity which acted as the main crack initiation site. It was found that fatigue life decreased as the size of the surface pore increased. A comparison was made between surface pore and inner pore fur its effect on the fatigue behavior. The results showed that the fatigue strength with the inner pores was higher than that of the surface pore.

• 한국임상수의학회지
• /
• 제25권1호
• /
• pp.1-8
• /
• 2008

This study is conducted to compare ultrasonographs with plain radiographs in monitoring bone regeneration during reconstruction of critical sized radial defects in dogs. A 15 mm bony defect was taken on each of the eight dog's radius using an electrical saw and an external fixator was applied. The experimental groups were divided into non-treated group(group 1) and $Osteoset^{(R)}$-treated group(group 2). Each fracture site was evaluated using plain radiography and ultrasonography. Radiographic callus formation occurred after $11.50{\pm}1.12$ days in group 1 and $11.50{\pm}0.5$ days in group 2. Neovascularized flow signal could be seen $6.50{\pm}1.5$ days and the vascular signal disappeared after $45.00{\pm}6.16$ days after operation in group 1. Neovascularized flow signal was observed $6.75{\pm}1.78$ days and vascular signal disappeared $23.25{\pm}3.03$ days after surgery which was caused by acoustic shadowing in group 2. Early stages of regeneration were observed more clearly with color Doppler ultrasonography than with plain radiography. Also from the results it is concluded that color Doppler ultrasonography are useful in observing initial stages of bone repair.

• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.56-63
• /
• 1997

In The study, the bonding of WC-9%Co to SUJ2 steel using Ag-Cu-Zn-Cd insert metal has performed to investigate the bonding properties by heat-treatment. Bonding was brazed for 5-30min at 95$0^{\circ}C$, performed solution treatment for 5 min at 85$0^{\circ}C$ and sustained subsequently oil quenching. To investigate the effect of heat-treatment, tempering was executed at $600^{\circ}C$ for 30 min after oil quenching. Mechnical properties and chemical compositions on the brazed bonding interface were investigated by means of microstructural observation, 4-point bending test and EDS and XRD measurements. The results obtained were as follows. 1) The bonding strength of WC-9%Co/SUJ2 joints by Ag-Cu-Zn-Cd insert metal obtained about 78, 117 and 72MPa after brazing for 5, 20 and 30 min at 95$0^{\circ}C$. And the highest bonding strength obtained about 131MPa after brazing for10 min at 95$0^{\circ}C$ 2) Higher bonding strength of 288MPa was obtained in the joint that brazed for 10 min at 95$0^{\circ}C$, and carried out tempering for 30 min at $600^{\circ}C$ subsequently. 3) Fracture of joint brazed by Ag-Cu-Zn-Cd insert metal for 5, 10, 20 and 30 min created WC-9%Co/SUJ2 interface. The joint that brazed for 10 min at 95$0^{\circ}C$ and then tempered for 30 min at $600^{\circ}C$ was fractured at the site of WC-9%Co.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.6-14
• /
• 2014

This paper has an aim to evaluate microstructure and fracture toughness of TMCP steel weldment applied for off-shore wind tower with the focus on the effect of heat input on the weldment with various welding processes; FCAW(13kJ/cm and 30kJ/cm), SAW(62kJ/cm), and EGW(177kJ/cm). Based on experimental results developed from this study, it was found that the impact toughness of top side for TMCP steel weldments with heat input up to 62 kJ/cm satisfied the required minimum value except the EGW(177kJ/cm). The heat input and microstructure are the main factors of impact toughness. The heat input of 13kJ/cm on back side with low heat input increased the amount of grain boundary ferrite which has low impact toughness, and heat input of 177kJ/cm on top side is significant enough to produce the austenite grain growth. The compositions and sizes of inclusions which are the dominant factors for the formation of acicular ferrite were analyzed by OM and EDS. As the heat input increased, the inclusions also grew and a nucleation site decreased. The size of nonmetallic inclusions and the crack width was nearly similar, therefore the inclusions were related with the crack propagation.

• 대한두개안면성형외과학회지
• /
• 제15권2호
• /
• pp.75-81
• /
• 2014

Background: The fibular free flap has been used as the standard methods of segmental mandibular reconstruction. The objective of mandibular reconstruction not only includes restored continuity of the mandible but also the recovery of optimal function. This paper emphasizes the advantage of the fibular free flap reconstruction over that of locking mandibular reconstruction plate fixation. Methods: The hospital charts of all patients (n=20) who had a mandibular reconstruction between 1994 and 2013 were retrospectively reviewed. Eight patients had plateonly fixation of the mandible, and the remaining 12 had vascularized fibular free flap reconstruction. Complications and outcomes were reviewed and compared between the 2 groups via statistical analysis. Results: Overall complication rates were significantly lower in the fibular flap group (8.3%) than in the plate fixation group (87.5%; p =0.001). Most (7/8) patients in the plate fixation group had experienced plate-related late complications, including plate fracture or exposure. In the fibular flap group, no complications were observed, except for a single case of donor-site wound dehiscence (1/12). Conclusion: The fibular free flap provides a more stable support and additional soft tissue support for the plate, thereby minimizing the risk of plate-related complications. Fibular free flap is the most reliable option for mandibular reconstruction, and we believe that the flap should be performed primarily whenever possible.

• 한국임상수의학회지
• /
• 제34권1호
• /
• pp.7-12
• /
• 2017

Twelve dogs weighing less than 10 kg underwent unilateral TTO to stabilize the stifle joint with cranial cruciate ligament rupture. Surgical findings, intra-operative and post-operative complications were recorded. Radiographic examinations were performed for 8 weeks following surgery. Postoperative outcome was evaluated using a visual analogue lameness scoring system. Mean preoperative PTA (the angle created by the intersection of the tibial plateau extrapolation line and the patellar tendon) was 103.8 degrees. Mean tibial wedge angle was 16.6 degrees. Mean postoperative PTA was 92.1 degrees. Intraoperatively, fracture through the caudal tibial cortex occurred in all dogs, through the distal tibial crest cortex in 2 dogs, through the lateral tibial cortex in 2 dogs and through the fibula in 1 dog. Four-week postoperative radiographs demonstrated evidence of progressive bone union at osteotomy site and complete unions were identified at 8 week in 10 dogs. All dogs were healed in 11 weeks. Most of dogs revealed weak lameness in 4 weeks and normal ambulation in 8 weeks postoperatively except for only one dog returned in 11 weeks. Despite frequent minor complication, it appears that the TTO is an alternative procedure for management of cranial cruciate ligament rupture in small breed dogs.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.112-118
• /
• 2013

In this study, constant loading test (CLT) was performed to evaluate the hydrogen embrittlement resistance for multipass FCA weld metals of 600MPa tensile strength grade. The microstructures of weld metal-2 having the smallest carbon equivalent (Ceq=0.37) consisted of grain boundary ferrite and widmanstatten ferrite in the acicular ferrite matrix. The weld metal-1 having the largest Ceq=0.47, showed the microstructures of grain boundary ferrite, widmanstatten ferrite and the large amount of bainite (vol.%=19%) in the acicular ferrite matrix. The weld metal-3 having the Ceq=0.41, which was composed of grain boundary ferrite, widmanstatten ferrite, and the small amount of bainite (vol.%=9%) in the acicular ferrite matrix. Hydrogen desorption spectrometry (TDS) used to analyze the amount of diffusible hydrogen and trapping site for the hydrogen pre-charged specimens electrochemically for 24 hours. With increasing the current density of hydrogen pre-charging, the released amount of diffusible hydrogen was increased. Furthermore, as increasing carbon equivalent of weld metals, the released diffusible hydrogen was increased. The main trapping sites of diffusible hydrogen for the weld metal having a low carbon equivalent (Ceq=0.37) were grain boundaries and those of weld metals having a relatively high carbon equivalent (Ceq: 0.41~0.47) were grain boundaries and dislocation. The fracture time for the hydrogen pre-charged specimens in the constant loading test was decreased as the carbon equivalent increased from 0.37 to 0.47. This result is mainly due to the increment of bainite that is vulnerable to hydrogen embrittlement.