• 방사성폐기물학회지
• /
• 제6권4호
• /
• pp.265-282
• /
• 2008

중 저준위 방사성폐기물 처분 부지의 부지특성조사 결과를 이용하여 처분장 부지의 지하수 유동체계를 이해하기 위한 수치 모델링을 수행하였다. 부지의 투수성 단열대 및 암반단열의 분포 특성에 근거하여 단열망 모델을 구축하고, 이를 이용하여 생성된 10개의 수리전도도장을 지하수 유동 모델링에 반영한 추계론적 Hybrid-EPM 방법으로 수치 모델을 구성하였다. 10회의 지하수 유동 모델링 결과, 처분 부지의 지하수두 및 지하수 흐름은 지표 근처에서 지형적인 요소에 크게 지배를 받는 것으로 나타나며 처분장 심도에서는 주변에 존재하는 투수성이 높은 단열대에 의해 영향을 받음을 확인할 수 있었다. 특히, 처분 시설 건설 중 사일로 주변 지역에서 수위 강하가 크게 발생하는 것으로 분석되었다. 처분 시설 폐쇄한 후 지하수위는 1년 이내에 급속히 회복되며, 대략 2년이 지난 후 완전히 회복 될 것으로 분석되었다.

• 대한지하수환경학회지
• /
• 제3권2호
• /
• pp.51-59
• /
• 1996

지하 LPG 저장시설과 같은 지하수에 의존하는 시설물 인접지역에 폐기물매립장이 설치될 경우, 침출수 누출로 인한 지하수오염 예측 및 오염방지 대책수립이 요구되고, 이를 위한 지하수유동 및 용질 이동(Mass Transport) 해석을 실시하게 된다. 본 연구에서는 현재 U 지역 석유화학공단내에서 발생된 상기 와 같은 내용의 문제점을 해결하기 위하여 해석학적 해석 및 수치해석에 의한 침출수이동 예측을 실시하였으며 침출수제어 공법을 검토하였다. 해석학적 해석은 입력요소를 이송(Advenction)요인과 분산 (Dispersion)요인으로 구분하여, Peclet 수로 부터 각 요인의 침출수이동에 미치는 영향을 분석 검토하였으며, 보존성용질 이송확산 방정식으로부터 입력요소 변화율과 침출수이동속도 변화율의 관계를 함수식으로 도출하여, 입력요소 변화에 따른 침출수 이동속도 변화를 간단히 예측할 수 있었다. 수치해석은 지하수유동 및 용질이동 해석용 FEM 프로그램인 AQUA2D를 이용하여 침출수이동 예측을 위한 수치모의를 실시하였다. 침출수제어공법 검토를 위해서 3D 불연속체모형을 모의하고 모의된 모형을 대상으로 지하수유동해석을 실시하여 암반내 열극(Fracture)의 상호 연결성 분석을 통한 수벽(Water Curtain) 시스템의 타당성을 분석하였다. 해석학적 해석 및 수치모의 결과, 폐기물매립장으로 부터 지하 LPG 저장기지로 침출수가 30년 이내로 유입되는 것으로 예측되었으며, 이를 방지하기 위한 침출수 제어공법으로는 수직수벽 시스템이 효율적인 것으로 예측되었다.

• 대한두개안면성형외과학회지
• /
• 제10권2호
• /
• pp.131-134
• /
• 2009

저자들은 보편적으로 보존치료가 불가능 하여 관혈적 정복술이 필요한 하악의 관절돌기골절 증례에서 당뇨, 고혈압의 병력, 고령으로 인한 절개 및 박리, 전신마취 시간증가로 발생할 수 있는 합병증을 줄이기 위해 우선적으로 시행한 형광투시하의 비관혈적 도수정복만으로 정확한 정복에 성공할 수 있었고 이후 골 유합까지 유지하여 만족스런 결과를 얻었기에 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.32-40
• /
• 1989

This study is based on 247 patients(348 cases) with facial bone fracture who were admitted to the department of oral and maxillofacial surgery, Kangnam sacred heart Hospital during the period of Jan. 1983 through sep. 1988. The patients with mandible fracture were analysed with the following items such as complications with treatment method undertaken : Bicortical osteosynthesis vs Monocortical osteosynthesis, advantages and Disadvantages. The results obtained are as follows : 1) The most common age groups for the facial bone fracture were 20 years 2) The ratio of Men to women was 5 : 1 3) The most frequent location of facial bone fractures was the Mandible(76.7%), Maxillae(10.6%), Zygoma(9.5%), Nasal bone(3.2%) 4) The ratio of Mandible to Maxillae was 7.2 : 1 5) In mandible fractures, the most frequent fracture site was Symphysis(48.7%) 6) In maxilla fractures, the most frequent case was Le fort III fracture(51.4%), followed by Le fort I fracture(29.7%), Le fort II fracture(18.9%) 7) The main contributing causes of facial bone fractures were Traffic Accident(37.7%), Fight(31.6%), Accident(27.5%) 8) In open reduction methods of mandible fracture, the frequency of postop, malocclusion was 15% in interosseous wiring, 7% in Bicortical osteosynthesis, 3% in Monocortical osteosynthesis. The miniplates show advantages over other forms of fixation, in that they are malleable and easy to insert, they achieve rigid fixation and stability.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권4호
• /
• pp.255-263
• /
• 2011

Introduction: Maxillomandibular fixation (MMF) is essential before surgery under general anesthesia in maxillofacial trauma patients. MMF is used basically to reconstruct the occlusion and occlusal stability to recover the facial shape and oral functions. The arch bar and wire is a traditional method for MMF, but it can not only bring pressure to the periodontal ligaments and teeth but also cause a penetrating injury to the surgeons. Materials and Methods: In this study, 198 patients with an open reduction using a manual reduction without MMF from September 2005 to May 2010 in Dankook University Dental Hospital were subjected to a follow-up evaluation during the postoperative 4 months periods. This study evaluated the incidence of complications according to the condition of the patient (gender, age), the state of bony union of the fracture sites and a numeric rating scale evaluation for postoperative pain scoring. Results: 1. The complications were classified into major and minor according to the seriousness, and the major complication rate was as low as 2.02%. Only 2 cases of re-operations (1.01%) were encountered. In the classification according to the fracture line, plate fracture was observed in both cases of mandibular symphysis fracture, and angle fractures and loosening of two screws were noted in the case of mandibular angle fracture. 2. The complication rate was similar regardless of gender and age. 3. The degree of bony union was satisfactory, and the complication rate was reduced as the bony union improved. 4. More patients complained of pain as the operation time was increased. Conclusion: The use of MMF is not always necessary if a skilled assistant is provided to help manually reduce the fracture site. Compared to other studies of mandibular fracture surgery using MMF, the complication rate was similar using only manual reduction and the patients' discomfort was reduced without MMF.

• 한방재활의학과학회지
• /
• 제30권2호
• /
• pp.19-35
• /
• 2020

Objectives The aim of this study is to evaluate the fracture healing effect of Jinmu-tang (JM) on femur fractured rats. Methods Rats were randomly divided into 5 groups (normal, control, positive control, JM extract with low concentration and JM extract with high concentration). All group except normal group went through both femur fracture. Normal and control group received no treatment at all. Positive control group were medicated with tramadol (20 mg/kg) once a day for 14 days. Experimental group was orally medicated with JM extract (10 mg/kg for low concentration, 50 mg/kg for high concentration) once a day for 14 days. In order to investigate fracture healing process, plasma and serum were obtained. Also, micro-computed tomography was conducted to see the frature site visually. Immunohistochemistry for transforming growth factor-β1, Ki67, alkaline phosphatase, runt-related transcription factor 2, receptor activator of nuclear factor kappa-β, tartrate resistant acid phosphatase was conducted to observe bone healing progress after 14 days since fracture occured. Aspartate aminotransferase, alanine aminotransferase, blood urea nitrogen and creatinine levels were measured in plasma, for hepatotoxicity and nephrotoxicity of JM extract. Osteocalcin was measured to observe activity of osteoblast. Results Through Micro-CT, more fracture healing was observed on both experimental group than control and positive control group. Through Hematoxylin & Eosin and safranin O staining showed bone cell proliferation and bone formation in the experimental group. RANK was significantly increased in the experimental groups. JM with high concentration showed statistically significant of TGF-β and Osteocalcin. NO, TRAP and ALP were not significantly changed. Liver toxicity was not significantly observed. Creatinine significantly increased in both experimental groups after 28 days. Conclusions As described above, JM extract showed anti-inflammatory effect, promoted fracture healing by stimulating the bone regeneration factor, and showed little hepatotoxicity and nephrotoxicity. In conclusion, JM extract can promote fracture healing and it can be used clinically to patients with fracture.

• Geomechanics and Engineering
• /
• 제18권6호
• /
• pp.585-594
• /
• 2019

In-situ leaching could be one of the promising mining methods to extract the minerals from deep fractured rock mass. Constrained by the low permeability at depth, however, the performance does not meet the expectation. In fact, the rock mass permeability mainly depends on the pre-existing natural fractures and therefore play a crucial role in in-situ leaching performance. More importantly, fractures have various characteristics, such as aperture, persistence, and density, which have diverse contributions to the promising method. Hence, it is necessary to study the variation of fluid rate versus fracture parameters to enhance in-situ leaching performance. Firstly, the subsurface fractures from the depth of 1500m to 2500m were mapped using the discrete fracture network (DFN) in this paper, and then the numerical model was calibrated at a particular case. On this basis, the fluid flow through fractured rock mass with various fracture characteristics was analyzed. The simulation results showed that with the increase of Fisher' K value, which determine the fracture orientation, the flow rate firstly decreased and then increased. Subsequently, as another critical factor affecting the fluid flow in natural fractures, the fracture transmissivity has a direct relationship with the flow rate. Sensitive study shows that natural fracture characteristics play a critical role in in-situ leaching performance.

• Parasites, Hosts and Diseases
• /
• 제51권4호
• /
• pp.453-459
• /
• 2013

Although Serbia is recognized as an endemic country for echinococcosis, no information about precise incidence in humans has been available. The aim of this study was to investigate the skeletal manifestations of hydatid disease in Serbia. This retrospective study was conducted by reviewing the medical database of Institute for Pathology (Faculty of Medicine in Belgrade), a reference institution for bone pathology in Serbia. We reported a total of 41 patients with bone cystic echinococcosis (CE) during the study period. The mean age of 41 patients was $40.9{\pm}18.8$ years. In 39% of patients, the fracture line was the only visible radiological sign, followed by cyst and tumefaction. The spine was the most commonly involved skeletal site (55.8%), followed by the femur (18.6%), pelvis (13.9%), humerus (7.0%), rib (2.3%), and tibia (2.3%). Pain was the symptom in 41.5% of patients, while some patients demonstrated complications such as paraplegia (22.0%), pathologic fracture (48.8%), and scoliosis (9.8%). The pathological fracture most frequently affected the spine (75.0%) followed by the femur (20.0%) and tibia (5.0%). However, 19.5% of patients didn't develop any complication or symptom. In this study, we showed that bone CE is not uncommon in Serbian population. As reported in the literature, therapy of bone CE is controversial and its results are poor. In order to improve the therapy outcome, early diagnosis, before symptoms and complications occur, can be contributive.

• Journal of Trauma and Injury
• /
• 제33권1호
• /
• pp.18-22
• /
• 2020

Purpose: Damage control laparotomy has contributed to improved survival rates for severe abdominal injuries. A large part of severe abdominal injury occurs with a concomitant pelvic bone fracture. The safety and effectiveness of internal fixation of pelvic bone fracture(s) has not been established. The aim of the present study was to evaluate infection risk in the pelvic surgical site in patients who underwent emergent abdominal surgery. Methods: This single-center retrospective observational study was based on data collected from a prospectively maintained registry between January 2015 and June 2019. Patients who underwent laparotomy and pelvic internal fixation were included. Individuals <18 and ≥80 years of age, those with no microbiological investigations, and those who underwent one-stage abdominal surgery were excluded. Comprehensive statistical comparative analysis was not performed due to the small number of enrolled patients. Results: A total of six patients met the inclusion criteria, and the most common injury mechanism was anterior-posterior compression (67%). The average duration of open abdomen was 98 hours (range, 44-98), and the time interval between abdominal closure and pelvic surgery was 98 hours. One patient (16.7%) died due to multi-organ dysfunction syndrome. Micro-organisms were identified in the abdominal surgical site in five patients (83%), with no micro-organisms in pelvic surgical sites. There was no unplanned implant removal. Conclusions: Internal fixation of pelvic bone fracture(s) could be performed in the state of open abdomen, and the advantages of early fixation may countervail the risks for cross contamination.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1997년도 추계학술발표회 논문집
• /
• pp.45-52
• /
• 1997

The objective of this study is, with concept of fitness-for-purpose, to evaluate the fracture toughness in X-grooved weld HAZ(heat-affected zone) of QLT(quenching, lamellarizing and tempering)-processed $9\%$ Ni steel, qualitatively and quantitatively, and analyze the relation with the change of microstructure. In general, CTOD test is widely used to determine the fracture toughness of steel weldments. But several problem of accuracy has been brought up. Therefore, in this study, modified CTOD test was used for X-grooved weld HAZ for $9\%$ Ni steel. Additionally, microstructure of HAZ is observed and analyzed by OM, SEM and XRD. From the resulty, HAZ toughness of QLT-$9\%$ Ni steel decreased as the evaluated region approaches the fusion line. The decreased toughness was partly caused by reduction of the retained austenite content, resulted from decreased nucleation site of the retained austenite content, resulted from decreased nucleasion site for reverse transformation due to the increasing fraction of coarse grained region. On the other hand, unexpectedly, the increasing fraction of ductile weld did not increase the HAZ toughness. Therefore, in this X-grooved weld HAZ, the primary factor affecting fracture toughness was the fraction of coarse grained region, i.e., the weakest region.