• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3583-3598
• /
• 2019

In order to improve the reliability and repair efficiency of distributed storage systems, minimum bandwidth regenerating (MBR) codes based on cyclic variable fractional repetition (VFR) codes are constructed in this thesis, which can repair failed nodes accurately. Specifically, in order to consider the imbalance of data accessed by the users, cyclic VFR codes are constructed according to that data with different heat degrees are copied in different repetition degrees. Moreover, we divide the storage nodes into groups, and construct MBR codes based on cyclic VFR codes to improve the file download speed. Performance analysis and simulation results show that, the repair locality of a single node failure is always 2 when MBR codes based on cyclic VFR codes are adopted in distributed storage systems, which is obviously superior to the traditional MBR codes. Compared with RS codes and simple regenerating codes, the proposed MBR codes based on cyclic VFR codes have lower repair locality, repair complexity and bandwidth overhead, as well as higher repair efficiency. Moreover, relative to FR codes, the MBR codes based on cyclic VFR codes can be applicable to more storage systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.238-245
• /
• 2010

For orthogonal frequency division multiplexing (OFDM) systems sharing the spectrum with narrow band primary devices, a fractional bandwidth (FBW) mode has been proposed recently to reduce the interference to the primary users. The FBW mode divides the total OFDM bandwidth into subbands and activates (or deactivates) a subset of the subbands according to the result of spectrum sensing. In this paper, we analyze the detection error probability of FBW mode information which is delivered by the sequence embedded in the preamble and evaluate the performance in wireless regional area network environments. The results show that the detection probability derived analytically estimates the actual value from simulation adequately and that a low detection error probability less than $10^{-3}$ is obtained at a low signal-to-noise power ratio.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.191-198
• /
• 2013

In this paper, we designed a wideband Tonpilz transducer, and verified the validity of the design through experiments. The wide frequency bandwidth was achieved by coupling the fundamental longitudinal mode of the transducer with a flapping mode of the head mass. Structure of the Tonpilz transducer was optimized by means of the finite element method and genetic algorithm to achieve the widest fractional bandwidth under design constraints. The optimized structure showed a far wider -6 dB fractional bandwidth of transmitting responses than that of single mode transducers. For verification of the design result, we manufactured a transducer prototype of the designed structure and characterized its performance, which showed good agreement with the design results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1182-1199
• /
• 2023

Fractional repetition (FR) codes can achieve exact uncoded repair for multiple failed nodes, with lower computational complexity and bandwidth overhead, and effectively improve repair performance in distributed storage systems (DSS). The actual distributed storage system is dynamic, that is, the parameters such as node storage overhead and number of storage nodes will change randomly and dynamically. Considering that traditional FR codes cannot be flexibly applied to dynamic distributed storage systems, a new construction scheme of adaptive-and-resolvable FR codes based on hypergraph coloring is proposed in this paper. Specifically, the linear uniform regular hypergraph can be constructed based on the heuristic algorithm of hypergraph coloring proposed in this paper. Then edges and vertices in hypergraph correspond to nodes and coded packets of FR codes respectively, further, FR codes is constructed. According to hypergraph coloring, the FR codes can achieve rapid repair for multiple failed nodes. Further, FR codes based on hypergraph coloring can be generalized to heterogeneous distributed storage systems. Compared with Reed-Solomon (RS) codes, simple regenerating codes (SRC) and locally repairable codes (LRC), adaptive-and-resolvable FR codes have significant advantages over repair locality, repair bandwidth overhead, computational complexity and time overhead during repairing failed nodes.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.385-398
• /
• 2002

To accommodate the increasing number of mobile terminals in the limited radio spectrum, wireless systems have been designed as micro/picocellular architectures for a higher capacity. This reduced coverage area of a cell has caused a higher rate of hand-off events, and the hand-off technology for efficient process becomes a necessity to provide a stable service. Population-based Bandwidth Reservation(PBR) Scheme is proposed to provide prioritized handling for hand-off calls by dynamically adjusting the amount of reserved bandwidth of a cell according to the amount of cellular traffic in its neighboring cells. We analyze the performance of the PBR scheme according to the changes of a fractional parameter, f, which is the ratio of request reservation to the total amount of bandwidth units required for hand-off calls that will occur for the next period. The vague of this parameter, f should be determined based on QoS(Quality of Service) requirement. To meet the requirement the value of Parameter(f) must be able to be adjusted dynamically according to the changing traffic conditions. The best value of f can be determined by a function of the average speed of mobile stations, average call duration, cell size, and so on. This paper considers the average call duration and the cell size according to the speed of mobile stations. Although some difference exists as per speed, in the range of 0.4 $\leq$ f $\leq$ 0.6, Blocking Probability, Dropping Probability and Utilization show the best values.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.102-110
• /
• 2016

After Sewol ferry disaster occurred in April 2014, Korean government began investing to deploy LTE-based public safety network until the year of 2017. In order to reduce the operating and capital costs, resource sharing scheme among public safety network and commercial LTE networks is considered as one of the viable approaches. This thesis proposes a method of allocating bandwidth of public safety network based on various priorities required for disaster scenarios and stages in a resource sharing environment. In order to obtain the highest efficiency, we formulate the bandwidth allocation problem as a Fractional Knapsack Problem. Greedy algorithm was applied to solve the problem. For performance evaluation, we created several disaster scenarios and set suitable parameters for each scenario based on a disaster manual. The proposed method is compared with two typical methods, which are Class-based bandwidth allocation and Uniform bandwidth allocation. The results showed that the better performance in terms of the sum of the values and the amount of lost bytes.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.166-172
• /
• 2001

A novel RF tunable bandpass filter structure using dielectric resonators and varactor diodes is considered for the optimization to achieve constant bandwidth with minimum passband insertion loss. The coupling between resonators is realized by coupling windows and series lumped L, C elements are used to realize the input/output stage couplings. A 5 poles, 0.01 dB ripple Chebyshev type filter tuned from 800 MHz~900 MHz is designed and presented in this paper. The passband bandwidth for the design is 10 MHz (fractional bandwidth = 1.2 %). Experimental results show that the 3 dB passband bandwidth variation is 12.04 MHz~12.16 MHz (less than 1 %) and passband insertion loss is 15 dB~7 dB depending on the tuning voltages.

• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.19-23
• /
• 2016

This paper presents a novel design for dual-band bandpass filters. The proposed filters are applicable to the carrier aggregation of the TV white space (TVWS) band and long-term evolution (LTE) band for cognitive radio applications. The lower passband is the TVWS band (470-698 MHz) whose fractional bandwidth is 40 %, while the higher passband is the LTE band (824-894 MHz) with 8 % fractional bandwidth. Since the two passbands are located very close to each other, a transmission zero is inserted to enhance the rejection level between the two passbands. The TVWS band filter is designed using magnetic coupling to obtain a wide bandwidth, and the LTE band filter is designed using dielectric resonators to achieve good insertion loss characteristics. In addition, in the proposed design, a transmission zero is placed with cross-coupling. The proposed dual-band bandpass filter is designed as a two-port filter (one input/one output) as well as a three-port filter (one common input/two outputs). The measured performances show good agreement with the simulated performances.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.10-17
• /
• 2021

The cymbal transducer is a miniaturized version of the Class V flextensional transducer. It has low resonant frequency and high output pressure characteristics compared with its size. However, since it has high quality factor and low energy conversion efficiency as well, it is often used as an array rather than single. When used as an array, a big change in the frequency characteristics occurs in comparison with that of the single transducer due to the interaction between constituent transducers. In this study, we designed a pattern of cymbal array with a view to having broadband characteristics. Three transducers having different center frequencies were designed first. The designed cymbal transducers were used to construct all possible patterns of a 3 × 3 planar array. After analyzing frequency characteristics of these patterns, based on the results, we derived the most effective pattern to achieve a higher fractional bandwidth. The derived array pattern showed an improvement of the fractional bandwidth by 24.9 % in comparison with the reference model.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.456-461
• /
• 2022

In this paper, a two-stage single-ended power amplifier (PA) with broadband gain characteristics was presented by utilizing a radio frequency (RF) transformer (TF), which is essential for a differential amplifier. The bandwidth of a PA can be improved by designing TF to have broadband characteristics and then applying it to the inter-stage matching network (IMN) of a PA. For broadband gain characteristics while maintaining the performance and area of the existing PA, an IMN was implemented on an monolithic microwave integrated circuit (MMIC) and a multi-layer printed circuit board (PCB), and the simulation results were compared. As a result of simulating the PA module designed using InGaP/GaAs HBT model, it has been confirmed that the PA employing the proposed design method has an improved fractional bandwidth of 19.8% at a center frequency of 3.3GHz, while the conventional PA showed that of 11.2%.