• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.301-306
• /
• 2015

An ultra-compact and wideband low noise amplifier (LNA) in a quad flat non-leaded (QFN) package is presented. The LNA monolithic microwave integrated circuit (MMIC) is implemented in a $0.25{\mu}m$ GaN IC technology on a Silicon Carbide (SiC) substrate provided by Triquint. A source degeneration inductor and a gate inductor are used to obtain the noise and input matching simultaneously. The resistive feedback and inductor peaking techniques are employed to achieve a wideband characteristic. The LNA chip is mounted in the $3{\times}3-mm^2$ QFN package and measured. The supply voltages for the first and second stages are 14 V and 7 V, respectively, and the total current is 70 mA. The highest gain is 13.5 dB around the mid-band, and -3 dB frequencies are observed at 0.7 and 12 GHz. Input and output return losses ($S_{11}$ and $S_{22}$) of less than -10 dB measure from 1 to 12 GHz; there is an absolute bandwidth of 11 GHz and a fractional bandwidth of 169%. Across the bandwidth, the noise figures (NFs) are between 3 and 5 dB, while the output-referred third-order intercept points (OIP3s) are between 26 and 28 dBm. The overall chip size with all bonding pads is $1.1{\times}0.9mm^2$. To the best of our knowledge, this LNA shows the best figure-of-merit (FoM) compared with other published GaN LNAs with the same gate length.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.335-344
• /
• 2011

A curvilinear non-hydrostatic free surface model is developed to investigate nonlinear wave interactions in a circular channel. The proposed model solves the unsteady Navier-Stokes equations in a three-dimensional domain with a pressure correction method, which is one of fractional step methods. A hybrid staggered-grid layout in the vertical direction is implemented, which renders relatively simple resulting pressure equation as well as free surface closure. Numerical accuracy with respect to wave nonlinearity is tested against the fifth-order Stokes solution in a two-dimensional numerical wave tank. Numerical applications center on the evolution of nonlinear waves including diffraction and reflection affected by the curvature of side wall in a circular channel comparing with linear waves. Except for a highly nonlinear bichrmatic wave, the model's results are in good agreement with superimposed analytical solution that neglects nonlinear effects. Through the numerical simulation of the highly nonlinear bichramatic wave, the model shows its capability to investigate the evolution of nonlinear wave groups in a circular channel.

• Journal of Veterinary Clinics
• /
• v.4 no.2
• /
• pp.473-481
• /
• 1987

This experiment was performed in order to establish a proper method to determine the half life of indocyanine green(ICG T$\frac{1}{2}$) and its fractional clearance rate(KICG) and investigate the applicability of indocyanine green ( ICG ) excretion test in hepatotoxicity experiment in Korean black goats. The results were as follows : 1. Maximum absorbance of ICG in plasma was at 810 nm in this experiment. 2. The coefficient of correlation between the results obtained by standard method and potassium cyanide method was 0.99 and the regression equation between two methods was y=0.9996 x＋0.0065. 3. As the disappearance curve of ICG plotted in semi-log graph revealed linear pattern at least for 6 minutes after injection, the postinjection blood samples were decided to collect at 2 and 6 minutes after ICG injection. 4. ICG T$\frac{1}{2}$ and KICG values were not affected by dose level of ICG. 5. When 0.25 mg of ICG per kg body weight was administered the normal data of ICG T$\frac{1}{2}$ and KICG in Korean black goa were 1.468${\pm}$0.197 minutes(mean${\pm}$SD) and 0.482${\pm}$0.076/minutes respectively. 6. After administration of carbon tetracholride. the ICG T$\frac{1}{2}$ started to increase acutely from day 1, revealed the peak at day 3, and then returned almostly but not completely to preinjection level at day 14. The ICG T$\frac{1}{2}$ value was suggested to be a sensitive indicator of hepatic injury in Korean black goats.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1323-1328
• /
• 2011

In the current design process for the lower arm used in automobile parts, an optimal solution of its various design variables should be found through exploration of the design space approximated using the response surface model formulated with a first- or second-order polynomial equation. In this study, a multi-level computational DOE (design of experiment) was carried out to explore the design space showing nonlinear behavior, in terms of factors such as the total weight and applied stress of the lower arm, where a fractional-factorial orthogonal array based on the artificial neural network model was introduced. In addition, the tolerance robustness of the optimal solution was estimated using a tolerance optimization with six sigma constraints, taking into account the tolerances occurring in the design variables.

• Journal of Korea Water Resources Association
• /
• v.34 no.4
• /
• pp.289-301
• /
• 2001

A fractional step finite difference model for the longitudinal dispersion of nonconservative pollutants is applied to the Nakdong River to simulate the phenol spill accident which occurred on March, 1971. Prior to the dispersion calculation, the flow conditions are simulated to provide inputs to the dispersion model. An unsteady flow model based on Preissmann's four-point scheme is used for this purpose. Sensitivities of the dispersion calculation to empirical equations for dispersion coefficient and to the first-order decay coefficient are analyzed. The time to peak concentration at a downstream location is significantly different depending on the formula for the dispersion coefficient. Although the decay coefficient does not affect the shape of the temporal concentration distribution, the concentration values depend on the decay coefficient verb significantly. An optimization technique is used to calibrate the dispersion model as well as the flow model. The time to the peak concentration is simulated for major positions of water intake along the Nakdong River.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.461-468
• /
• 2012

In this study, a Cartesian-grid method based on finite volume approach is applied to simulate the ship motions in large amplitude waves. Fractional step method is applied for pressure-velocity coupling and TVD limiter is used to interpolate the cell face value for the discretization of convective term. Water, air, and solid phases are identified by using the concept of volume-fraction function for each phase. In order to capture the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with weighed line interface calculation (WLIC) method which considers multidimensional information. The volume fraction of solid body embedded in the Cartesian grid system is calculated using a level-set based algorithm, and the body boundary condition is imposed by a volume weighted formula. Numerical simulations for the two-dimensional barge type model and Wigley hull in linear waves have been carried out to validate the newly developed code. To demonstrate the applicability for highly nonlinear wave-body interactions such as green water on the deck, numerical analysis on the large-amplitude motion of S175 containership is conducted and all computational results are compared with experimental data.

• Journal of Biomedical Engineering Research
• /
• v.34 no.1
• /
• pp.24-33
• /
• 2013

To enhance the speech perception of hearing aid users in noisy environment, most hearing aid devices adopt various beamforming algorithms such as the first-order differential microphone (DM1) and the two-stage directional microphone (DM2) algorithms that maintain sounds from the direction of the interlocutor and reduce the ambient sounds from the other directions. However, these conventional algorithms represent poor directionality ability in low frequency area. Therefore, to enhance the speech perception of hearing aid uses in low frequency range, our group had suggested a fractional delay subtraction and integration (FDSI) algorithm and estimated its theoretical performance using computer simulation in previous article. In this study, we performed a KEMAR test in non-reverberant room that compares the performance of DM1, DM2, broadband beamforming (BBF), and proposed FDSI algorithms using several objective indices such as a signal-to-noise ratio (SNR) improvement, a segmental SNR (seg-SNR) improvement, a perceptual evaluation of speech quality (PESQ), and an Itakura-Saito measure (IS). Experimental results showed that the performance of the FDSI algorithm was -3.26-7.16 dB in SNR improvement, -1.94-5.41 dB in segSNR improvement, 1.49-2.79 in PESQ, and 0.79-3.59 in IS, which demonstrated that the FDSI algorithm showed the highest improvement of SNR and segSNR, and the lowest IS. We believe that the proposed FDSI algorithm has a potential as a beamformer for digital hearing aid devices.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2009

The purpose of this study was to evaluate the legibility of one-syllable Korean characters with the participation of sixteen subjects. The experiment considered nine factors including age (young and old), gender (male and female), illuminance (150lx and 600lx), viewing distance (50cm and 200cm), material type (paper and LCD), typeface (Ming and Gothic), thickness (plain and bold), color contrast (black letter/white background and white letter/black background), and complexity (simple, complex, and number) to examine main effects with a $2^{6-3}\times3$ fractional factorial design. The dependent variables were minimum character size of 100% correctness, maximum character size of 0% correctness, and minimum character size of comfortable reading preference. The results of analysis of variance (ANOVA) revealed that age, illuminance, viewing distance and complexity were significant for all dependent variables, except gender which was significant only for the minimum character size of comfortable reading preference. In general, the young could see twofold smaller size letters than the elderly. The subjects could see smaller sized letters with the illuminance of 600lx and viewing distance of 50cm than 150lx and 200cm, respectively and also with numbers, simple characters, and complex characters in that order. The findings of this study could be characterized about the legibility of Korean characters and be good resources for developing its standard.

• Corrosion Science and Technology
• /
• v.5 no.5
• /
• pp.168-172
• /
• 2006

Alloy 600 having a superior resistance to a corrosion is used as a steam generator tubing in nuclear power plants. In spite of its high corrosion resistance, there are many tubings which experience corrosion problems such as a SCC under the high temperature and high pressure environments of nuclear power plants. The Alloy 600 tubing can be repaired by using a Ni electroplating having an excellent SCC resistance. In order to carry out a successful Ni electrodeposition inside a steam generator tubing, the effects of various parameters on the material properties of the electrodeposit should be elucidated. Hence this work deals with the effects of an applied current density, duty cycle($T_{on}/(T_{on}+T_{off})$) of a pulse current, bath temperature and solution pH on the material properties of Ni electrodeposit obtained from a Ni sulphamate bath by analyzing the current efficiency, potentiodynamic curve, hardness and stress-strain curve. Hardness, YS(yield strength) and TS(tensile strength) decreased whereas the elongation increased as the applied current density increased. This was thought to be by a concentration depletion at the interface of the electrodeposit/solution, and a fractional decrease of the hydrogen reduction reaction. As the duty cycle increased, the hardness, YS and TS decreased while the elongation increased. During an off time at a high duty cycle, the concentration depletion could not be recovered sufficiently enough to induce a coarse grain sized electrodeposit. With an increase of the solution temperature and pH, the YS and TS increased while the elongation decreased. The experimental results of the hardness and the stress-strain curves can be supplemented by the results of the potentiodynamic curve.

• Education of Primary School Mathematics
• /
• v.21 no.2
• /
• pp.111-130
• /
• 2018

In this study, I compared and analyzed the contents of Korean, Japanese, Singapore, American, and Finnish textbooks about fraction which is one of the important and difficult concepts in elementary school mathematics. This is aimed to get the implications for meaningful fractional teaching and learning by analyzing the advantages and disadvantages of the methods and time of introducing the concept because fraction has the diversity of the sub-concepts and the introducing methods or process. As a result of the analysis, the fraction was introduced as part-whole(area) in all five countries' textbooks, but the use of number line, conversion between improper fraction and mixed number, whether to deal with part-whole(set) model. Furthermore, there are differences in the methods in obtaining of the equivalent fraction and the order of arrangement in comparison of fraction. Through this analysis, we discussed the reconsideration of the introducing contexts of fractions, the use of number line when introducing fractions, and the problem of segmentation and classification of contents.