• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1199-1203
• /
• 2009

Melamine is a chemical intermediate to manufacture amino resins and plastics, which cannot be used as food additive since it can cause kidney stones. A qualitative determination method of melamine residue in powdered and liquid milk was developed using Fourier transform infrared (FTIR) spectroscopic technique. The calibration sets consisted of 21 standard melamine solutions, in which 1% trichloroacetic acid aqueous solution and acetonitrile (3:1, v/v) were used as solvent. The model was validated using 10 standard melamine solutions which were unused to build up the calibration set. Infrared (IR) absorbance peaks specific to almost all chemical groups in melamine molecule were shown in the spectral range between 1,100 and 1,800/cm. Combined partial least squares (PLS)-$2^{nd}$ derivative calibration model coupled with mean centering (MC) mathematical enhancement showed the highest correlation coefficients ($R^2$>0.99). In brief, the FTIR technique can be used for quantitative analysis of melamine in milk samples.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.215-219
• /
• 2008

실리콘 웨이퍼 위에 Plasma Enhanced Chemical Vapor Deposition (PECVD) 방법으로 증착 된 SiNx 박막의 수소 함량을 측정하였다. 제작된 SiNx 박막은 Fourier Transform Infrared Spectroscopy (FT-IR) 사용하여 박막의 수소함량과 결합상태를 확인하였으며, Atomic Force Microscopy (AFM) 측정을 통하여 박막의 표면 거칠기를 비교, 시료의 조성비 평가를 위하여 Rutherford Backscattering Spectrometry (RBS)을 사용하였다. 또한 SiNx박막의 조성확인을 위하여 Photoluminescence(PL)를 이용하여 FT-IR spectrum의 결과와 비교 해석하였다. FT-IR에서 NH의 수소함량(at%)이 0.92 %에서 0.64 %로 낮아질 수록 AFM을 이용한 표면 거칠기는 12.8 $\AA$에서 10.8 $\AA$로 낮아지고, Si양이 상대적으로 많아지는 것을 PL에서 확인하였으며, RBS에서도 시뮬레이션을 통해 비슷한 결과를 얻을 수 있었는데, 이는 FT-IR을 사용함으로써 SiNx 박막의 수소 함량의 측정이 가능하다는 것을 보여주므로 단위공정에서 신속하게 SiNx 박막 분석이 가능함을 알 수 있었다.

• Plant Biotechnology Reports
• /
• 제3권1호
• /
• pp.87-93
• /
• 2009

To determine whether pattern recognition based on metabolite fingerprinting for whole cell extracts can be used to discriminate cultivars metabolically, leaves and fruits of five commercial strawberry cultivars were subjected to Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectral data from leaves were analyzed by principal component analysis (PCA) and Fisher's linear discriminant function analysis. The dendrogram based on hierarchical clustering analysis of these spectral data separated the five commercial cultivars into two major groups with originality. The first group consisted of Korean cultivars including 'Maehyang', 'Seolhyang', and 'Gumhyang', whereas in the second group, 'Ryukbo' clustered with 'Janghee', both Japanese cultivars. The results from analysis of fruits were the same as of leaves. We therefore conclude that the hierarchical dendrogram based on PCA of FT-IR data from leaves represents the most probable chemotaxonomical relationship between cultivars, enabling discrimination of cultivars in a rapid and simple manner.

• 한국광과학회:학술대회논문집
• /
• 한국광과학회 1996년도 학술대회지
• /
• pp.26-27
• /
• 1996

• Food Science and Biotechnology
• /
• 제16권3호
• /
• pp.477-481
• /
• 2007

Fourier transform near-infrared (FT-NIR) spectroscopy and partial least squares (PLS) regression were used to predict the amylose content of polished rice. Spectral reflectance data in a wavelength range of 1,000 to 2,500 nm were obtained with a commercial spectrophotometer for 60 different varieties of Korean rice. For a comparison of this spectroscopic method to a standard chemical analysis, the amylose contents of the tested rice samples were determined by the iodine-blue colorimetric method. The highest correlation for the rice amylose ($R^2=0.94$, standard error of prediction=0.20% amylose content) was obtained when using the FT-NIR spectrum data pre-treated with normalization, the first derivative, smoothing, and scattering correction.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.178-184
• /
• 1997

The cone calorimeter as defined by ISO 5660, ASTM 1354, and NFPA 264A is used to assess the reaction to fire of almost any material that must be evaluated in the fire science field. Typical combustion gas analyses include oxygen, CO and CO2. Oxygen consumption is used to determine rate of heat release. Analysis of combustion gases other than oxygen, CO and CO2 has been attempted using filters to remove the solid smoke particles before analysis. This method has generated unreliable results due to the adsorption of many gas components on the active carbon . particles deposited on the filters. A technique using fourier Transform Infrared (FTIB) analysis without filtration will be disclosed and a discussion will be presented of the analytical results of toxic gases produced from various flame retarded polymeric materials. Use of such data in lethal toxic potency determinations is also reviewed.

• 한국화재조사학회논문지
• /
• 제11권1호
• /
• pp.37-40
• /
• 2008

본 연구는 저압 분전함내에서 발생한 사고사례를 분석하여 사고의 메커니즘과 사고특성 등을 연구하여 사고 패턴을 제시함으로서 전기설비 사고 원인 분석 및 진단을 위한 자료를 확보하고자 하였다. 이를 위해 금속현미경, X-ray, FI-IR 등의 분석을 하였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.269-272
• /
• 2008

This paper deals with damage patterns of cabinet panel for low voltage deteriorated by flame. In order to analyze damage patterns, we used Metallurgical Microscope, x-ray system, and Fourier Transform Infrared spectroscopy. Firstly, Metallurgical microscope was used for analysis of electrical causes, such as electric short and overload. Secondly, X-ray system was used for analysis of internal characteristics of circuit breakers. Lastly, Fourier Transform Infrared spectroscopy was used for analysis of damage direction by flame. The following results were obtained.

• Bulletin of the Korean Chemical Society
• /
• 제15권5호
• /
• pp.369-374
• /
• 1994

Self-assembled (SA) and Langmuir-Blodgett (LB) monolayers of arachidic acid on silver surfaces have been investigated by a reflection-absorption Fourier transform infrared spectroscopy. Arachidic acid was adsorbed on silver as carboxylate with its two oxygen atoms bound symmetrically to the surface. Although both the SA and LB monolayers consisted of fully extended trans zigzag carbon chains, a closer examination indicated that the SA monotayers should possess a more ordered crystalline structure than the LB monolayers. The infrared spectral data dictated that the extent of methyl group exposure at the air-film interface was greater in the SA monolayers than the LB monolayers, in agreement with the contact angle measurement. From a theoretical analysis, the alkyl chains in each monolayers seemed to be tilted away from the surface normal by less than $3.5^{\circ}$, but in opposite directions. Arachidic acid monolayers were concluded to have same structure as stearic acid monolayers.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.599-602
• /
• 2016

Fluoride (F) is an important element for the mineralization of body tissues. The purpose of this study was to administer fluoride prenatally to rats to evaluate its beneficial concentration for rat bone using microstructural analysis, to analyze its effect on the bone structure, and to evaluate the effect of its transfer through rat placenta. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectrometry (NMR) were performed. The $^{19}F$ NMR and $^{31}P$ NMR signals suggested the existence of fluoride ions in the apatite lattice because the signals were caused by the fluoride ions that were coupled to the phosphate atoms and were affected in the phosphate phases other than the element phases in the apatite. Consequently, if it was not affected too much, the desirable concentration of prenatal fluoride treatment could have a helpful effect on the bone crystal structure through placental fluoride transfer.