• 융합신호처리학회논문지
• /
• 제1권1호
• /
• pp.49-57
• /
• 2000

In this study, a new algorithm for canceling a MRI artifact due to the translational motion In the image plane is described. Unlike the conventional iterative phase retrieval algorithm, in which there is no guarantee for the convergence, a direct method for estimating the motion is presented. In previous approaches, the motions in the x(read out) direction and the y(phase encoding) direction were estimated simultaneously. However, the feature of x and y directional motions are different from each other. By analyzing their features, each x and y directional motion is canceled by the different algorithms in two steps. First, it is noticed that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non-zero area of the spectrum just corresponds to the projected area of the density function on the x axis. So the motion is estimated by tracing the edges between non-zero area and zero area of the spectrum, and the x directional motion is canceled by shifting the spectrum in an reverse direction. Next, the y directional motion is canceled by using a new constraint condition, with which the motion component and the true image component can be separated. This algorithm is shown to be effective by using a phantom image with simulated motion.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.605-608
• /
• 2009

이동 목표물 및 기상 현상 등의 원격탐지를 위한 레이다 시스템에서는 수신되는 전자파 반사 신호로부터 유용한 정보를 추출하기 위하여 각 거리별로 도플러 스펙트럼의 추정이 필요할 수 있다. 그러나 이제까지 일반적으로 적용되어졌던 FFT 주파수 추정방법은 안테나의 dwell time 이 짧은 경우 해상도 문제가 발생하거나 또는 상대적으로 강한 반사 신호의 부엽 확산으로 인하여 상대적으로 약한 목표물의 탐지가 어려울 수 있다. 따라서 본 논문에서는 이러한 문제점을 개선하기위하여 시간영역에서의 도플러 신호모델 파라메터 추정을 통한 효율적인 도플러 스펙트럼 추정방법에 관하여 비교하고 고찰하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.737-738
• /
• 2008

• 전기의세계
• /
• 제34권2호
• /
• pp.94-98
• /
• 1985

Autocorrelation에 관계되는 Fourier변환의 기본적인 성질을 이용하여 speckle잡음제거가 power spectrum estimation 문제와 같이 해석될 수 있다는 것을 보였고 spectral estimation 방법으로서 최대 entrppy방법을 사용하여 딴 방법들과 비교하여 볼때 좋은 결과를 얻었다. 앞으로 2차원 test object까지의 확장, 이 알고리즘의 각 파라메타들에 대한 sensitivity, optimal한 Hanning window크기 판단 기준으로서 normalized mean squared error(NMSE)를 사용하였다.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.34-43
• /
• 2012

This paper describes system modeling and controller design method in the measured signal by discrete Fourier transform. Transfer function of the second order system is estimated by the dominant parameter which is computed in the magnitude and the phase of Fourier spectrum of the measured signal. In addition, the controller was designed by the estimated transfer function, and the results were compared. The proposed estimation method of transfer function contains only a very simple mathematical process. Therefore, it is effective to design the controller in the measured signal when the output of the system contains the characteristics of complex exponential functions case. The proposed method was applied on Op-Amp system to verify the efficiency and the reliability. The results show that the proposed algorithms are highly applicable to the system modeling and controller design in the measured data.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.1100-1108
• /
• 2017

A thermal-hydraulic system code is an essential tool for the design and safety analysis of a nuclear power plant, and its accuracy quantification is very important for the code assessment and applications. The fast Fourier transform-based method (FFTBM) by signal mirroring (FFTBM-SM) has been used to quantify the accuracy of a system code by using a comparison of the experimental data and the calculated results. The method is an improved version of the FFTBM, and it is known that the FFTBM-SM judges the code accuracy in a more consistent and unbiased way. However, in some applications, unrealistic results have been obtained. In this study, it was found that accuracy quantification by FFTBM-SM is dependent on the frequency spectrum of the fast Fourier transform of experimental and error signals. The primary objective of this study is to reduce the frequency dependency of FFTBM-SM evaluation. For this, it was proposed to reduce the cut off frequency, which was introduced to cut off spurious contributions, in FFTBM-SM. A method to determine an appropriate cut off frequency was also proposed. The FFTBM-SM with the modified cut off frequency showed a significant improvement of the accuracy quantification.

• 한국지진공학회논문집
• /
• 제13권6호
• /
• pp.11-25
• /
• 2009

본 연구에서는 지진파의 푸리에 가속도스펙트럼(Fourier Acceleration Spectrum)에 기반한 계측진도 평가방법(Sokolov and Wald, 2002)을 국내에 적용하기 위해 국내 지진 MMI ${\leq}$ IV 범위에 대한 진도별 FAS 통계특성(평균과 표준편차) 모델을 기상청 발표 진도자료로 부터 도출된 65개 지진에 대한 등진도구역도(Isoseismal Maps)와 등진도구역도 상의 일관된 부지특성을 갖는 580개 수평성분 FAS 자료를 기반으로 경험적으로 도출하였다. 일관된 부지특성을 갖는 FAS는 특정 지진관측소에서 관측된 FAS를 국내 지반물성을 대표할 수 있는 D 등급관측소(연관희와 서정희, 2007)의 부지증폭특성을 갖도록 변환하여 도출하였다. 국내 지진의 MMI ${\leq}$ IV의 FAS 평균값은 로그영역에서 진도에 비례하는 선형성을 나타내었으며, 진도 IV에 대한 FAS 평균은 전 세계 모델과 유사한 특징을 보였다. 또한 진도 MMI ${\leq}$ IV의 FAS 표준편차는 진도 V 이상의 전 세계적인 모델의 표준편차 보다는 크게 평가되었으나, 진도 IV에 대한 전 세계적인 모델의 표준편차보다는 현저히 낮은 값을 나타내었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.559-568
• /
• 2017

Harmonic/inter-harmonic detection and analysis is an important issue in power system signal processing. This paper proposes a fast algorithm based on matching pursuit (MP) sparse signal decomposition, which can be employed to extract the harmonic or inter-harmonic components of a distorted electric voltage/current signal. In the MP iterations, the method extracts harmonic/inter-harmonic components in order according to the spectrum peak. The Fast Fourier Transform (FFT) and nonlinear optimization techniques are used in the decomposition to realize fast and accurate estimation of the parameters. First, the frequency estimation value corresponding to the maxim spectrum peak in the present residual is obtained, and the phase corresponding to this frequency is searched in discrete sinusoids dictionary. Then the frequency and phase estimations are taken as initial values of the unknown parameters for Nelder-Mead to acquire the optimized parameters. Finally, the duration time of the disturbance is determined by comparing the inner products, and the amplitude is achieved according to the matching expression of the harmonic or inter-harmonic. Simulations and actual signal tests are performed to illustrate the effectiveness and feasibility of the proposed method.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.334-339
• /
• 2015

Terabit-per-second (Tb/s) transmission capacity for the next generation of long-haul communication networks can be achieved using multicarrier optical super-channel technology. In an elastic orthogonal frequency division multiplexing (OFDM) super-channel transmission system, demultiplexing a portion of an entire spectrum in the form of a subband with minimum power is critically required. A major obstacle to achieving this goal is the analog-to-digital converter (ADC), which is power-hungry and extremely expensive. Without a proper ADC that can work with low power, it is unrealistic to design a 100G coherent receiver suitable for a commercially deployable optical network. Discrete Fourier transform (DFT) is often seen as a primary technique for understanding partial demultiplexing, which can be attained either optically or electronically. If fairly comparable performance can be achieved with an all-optical DFT circuit, then a solution independent of data rate and modulation format can be obtained. In this paper, we investigate two distinct OFDM super-channel receiver models, based on electronic and all-optical DFT-technologies, for partial carrier demultiplexing in a multi-Tb/s transmission system. The performance comparison of the receivers is discussed in terms of bit-error-rate (BER) performance.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.67-74
• /
• 2004

동적 불안정 좌굴현상에 관한 연구는 다소 발표되고 있으나, 주기성을 가진 하중하에서의 동적 좌굴을 다룬 연구는 그리 많지 않은 편이다. 주기성을 가진 하중하에서의 거동은 STEP 하중하에서의 거동과는 다르리라 예상된다. 본 논문에서는 동적 불안정의 기본 메커니즘을 파악하기 위하여 양단 핀으로 고정된 정현형 아치가 정현형 조화하중을 받았을 때의 얕은 아치를 대상으로 한다. Newmark- β법에 의한 수치적분을 이용하여 비선형 운동 방정식의 변위 응답을 구하고, 얻어진 비선형 변위 응답으로 FFT(Fast Fourier Transform)에 의한 연속 응답 스펙트럼을 구해 동적 불안정 특성에 관해서 분석한다.