• Journal of Periodontal and Implant Science
• /
• v.46 no.1
• /
• pp.46-56
• /
• 2016

Purpose: We evaluated the efficacy of a mouthwash containing potassium nitrate ($KNO_3$) as its main component, along with sodium fluoride (NaF) and cetylpyridinium chloride (CPC). The primary endpoint was the relief of dentin hypersensitivity (DH) against the cold stimuli. The effects on other DH tests and periodontal inflammation were also evaluated. Methods: We used a single-center, double-blind, placebo-controlled, randomized design. A total of 82 patients with DH (40 in the test group, 42 placebo controls) were analyzed using visual analog scales (VASs) for a cold test, a tactile test, a compressive air test, and self-reported pain during daily activities, as well as clinical parameters including plaque index, gingival index, modified sulcular bleeding index (mSBI), gingival recession, and probing depth, which were collected at baseline and after four and six weeks of mouthwash use. Results: VAS scores for cold sensations, tactile sensations, the compressive air test, and self-reported pain significantly decreased from baseline during the six weeks in both groups (P<0.01), and no significant differences between the groups were found. In male patients (10 in the test group and 7 in the control group), both groups showed significant reductions in VAS scores for the cold test over the six weeks, and greater reductions were found in the test group than in the control group between four and six weeks (P=0.01) and between baseline and six weeks (P<0.01). In addition, the mSBI in the test group significantly decreased from baseline during the six weeks (P<0.01), and the changes at four and six weeks from baseline were significantly greater in the test group compared to the control group (P=0.03 and P=0.02, respectively). Conclusions: A mouthwash containing a mixture of $KNO_3$, NaF, and CPC reduced DH and gingival inflammation, however, the efficacy was comparable to the control group.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.1
• /
• pp.53-61
• /
• 2021

The quantified analysis of damages to wastewater treatment plants by natural disasters is essential to maintain the stability of wastewater treatment systems. However, studies on the quantified analysis of natural disaster effects on wastewater treatment systems are very rare. In this study, a total disaster index (DI) was developed to quantify the various damages to wastewater treatment systems from natural disasters using two statistical methods (i.e., AHP: analytic hierarchy process and PCA: principal component analysis). Typhoons, heavy rain, and earthquakes are considered as three major natural disasters for the development of the DI. A total of 15 input variables from public open-source data (e.g., statistical yearbook of wastewater treatment system, meteorological data and financial status in local governments) were used for the development of a DI for 199 wastewater treatment plants in Korea. The total DI was calculated from the weighted sum of the disaster indices of the three natural disasters (i.e., TI for typhoon, RI for heavy rain, and EI for earthquake). The three disaster indices of each natural disaster were determined from four components, such as possibility of occurrence and expected damages. The relative weights of the four components to calculate the disaster indices (TI, RI and EI) for each of the three natural disasters were also determined from AHP. PCA was used to determine the relative weights of the input variables to calculate the four components. The relative weights of TI, RI and EI to calculate total DI were determined as 0.547, 0.306, and 0.147 respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.93-106
• /
• 2020

This research explores how imported automobile companies can develop their strategies to improve the outcome of their recalls. For this, the researchers analyzed patterns of recall demand, classified recall types based on the demand patterns and examined response strategies, considering plans on how to procure parts and induce customers to visit workshops, recall execution capacity and costs. As a result, recalls are classified into four types: U-type, reverse U-type, L- type and reverse L-type. Also, as determinants of the types, the following factors are further categorized into four types and 12 sub-types of recalls: the height of maximum demand, which indicates the volatility of recall demand; the number of peaks, which are the patterns of demand variations; and the tail length of the demand curve, which indicates the speed of recalls. The classification resulted in the following: L-type, or customer-driven recall, is the most common type of recalls, taking up 25 out of the total 36 cases, followed by five U-type, four reverse L-type, and two reverse U-type cases. Prior studies show that the types of recalls are determined by factors influencing recall execution rates: severity, the number of cars to be recalled, recall execution rate, government policies, time since model launch, and recall costs, etc. As a component demand forecast model for automobile recalls, this study estimated the ARIMA model. ARIMA models were shown in three models: ARIMA (1,0,0), ARIMA (0,0,1) and ARIMA (0,0,0). These all three ARIMA models appear to be significant for all recall patterns, indicating that the ARIMA model is very valid as a predictive model for car recall patterns. Based on the classification of recall types, we drew some strategic implications for recall response according to types of recalls. The conclusion section of this research suggests the implications for several aspects: how to improve the recall outcome (execution rate), customer satisfaction, brand image, recall costs, and response to the regulatory authority.

• The Korea Journal of Herbology
• /
• v.28 no.5
• /
• pp.95-101
• /
• 2013

Objectives : A quantitative method using high performance liquid chromatography with a photodiode array detector(HPLC-PDA) was established for the quantitative analysis of the four main compound and pattern analysis to classification Piiellia ternate, P. pedatisecta and Typhonium flagelliforme. Methods : The analytical procedure for the determination of P. ternata, together with the known main compounds uracil, uridine, guanosine and adenosine was established. Optimum HPLC-PDA separation of these P. ternata was possible on Luna C18(2) column material, using water and acetonitrile as mobile phase. The method was validated according to regulatory guidelines. In addition, this assay method were analyzed for the content of four main compound in P. ternata, P. pedatisecta and T. flagelliforme and by data obtained from the HPLC-PDA analysis was performed principal component analysis(PCA). Results : Validation results indicated that the HPLC method is well suited for the determination of the roots of P. ternata with a good linearity ($r^2$ > 0.999), precision and recovery rates. Analysis of HPLC-PDA, the average content of uracil, uridine, guanosine and adenosine was significantly higher in P. ternate>P. pedatisecta> T. flagelliforme order. The application of PCA to main compound data by HPLC-PDA permitted the effective discrimination among the three species. Conclusions : Analysis of both HPLC-PDA and PCA confirmed the fact that four main compound and pattern profiles of P. ternata, P. pedatisecta and T. flagelliforme were different from each other.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.31-40
• /
• 2007

Proper weight shifting is essential for a successful shot in golf swing and this could be described by means of the ground forces between the feet and ground. It is assumed that the ground forces would different according to the club used because the length and swing weight of each club is different. But, in present, it is not clear what changes are made by the change of clubs and this affect the swing motion. Therefore this study focused on the investigation of the changes of the ground forces and ground reaction forces (GRF) by the change of club length. The subjects were three professional male golfers. Four swings (driver, iron 3, iron 5, and iron 7) for each subject were taken by two high speed video cameras and two AMTI force platforms were used to measure the GRF simultaneously. Kwon GRF 2.0 and Mathcad 13 software were used to post processing the data. Changes of the three major component of GRF (Vertical, lateral, anterior-posterior force) at 10 predefined events were analyzed including the maximum. Major findings of this study were as follows. 1. Vertical forces; - There were no significant changes until the top of backswing. - Maximum was occurred at the club horizontal position in the downswing for both feet. The shorter club produced more maximum forces than longer ones in the left foot, but reverse were true for the right foot. - Maximum forces at impact shows the same patterns. 2. Lateral forces; Maximum was occurred at the club horizontal position for both feet, but there were no lateral forces because the direction of two forces was different. Maximum force pattern by different clubs was same as the vertical component. 3. Anterior-posterior forces; - This component made a counter-clock wise moment about a vertical axis located between two foot until the club vertical position was reached during the backswing, and reverse moment were produced when the club reached horizontal at the downswing. - Also this component made a forward moment about a horizontal axis located in the CG during the fore half of the downswing, and a reverse moment until the club reached vertical at the follow through phase. Maximum was occurred at the club vertical in the downswing for both feet. The longer club produced more maximum forces than shorter ones for both feet.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.31-37
• /
• 1993

To analyze and classify the varietal variation of alkali digestibility in detail, which is closely connected with the gelatinization temperature and physical characteristics of cooked rice, the patterns of alkali decomposition changed along the alkali concentration were investigated for thirty three Korean leading rice cultivars and new breeding lines(japonica : 25, Tongil-type:8) including five glutinous rice. Principal component analysis was used to condense the information and to classify rice materials according to decomposed reaction pattern at several levels of potassium hydroxide(KOH) concentration. Thirty three rice varieties were classified largely into four groups by the distribution on the plane of upper two principal component scores which contained above 92% of total informations. Group I was consisted of one variety, Dobongbyeo, which owned almost same strong resistance to alkali digestion at the range of 0.8% to 1.6% KOH solutions. Group II included three japonica and Tongil-type glutinous rice varieties, which revealed medium alkali digestion value(ADV) at 1.4% KOH solution and intermediate change in ADV from 0.8% to 1.6% KOH solutions. Most of Tongil-type and early-maturity japonica rice, which exhibited medium-high ADV at 1.4% of KOH concentration and large ADV difference between low and high alkali solutions, were contained in Group III. Group N included most of medium or medium-late-maturity japonica, which showed high ADV at 1.4% KOH and medium or intermediate-high ADV change between low and high alkali solutions. The 1st principal component indicated the average index of ADV through 0.8-1.6% KOH solutions and the 2nd principal component pointed out the factor related with ADV difference between low and high alkali solutions or regression coefficients of ADV change along with the KOH concentrations.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.3
• /
• pp.83-90
• /
• 2007

The purpose of main entrance was to protect the house with the wall and working for the house-gate where people come in and go out. On the other hand, the type of main entrance is changed variously depended on the materials for house and method of construction. Eleven villages in the Chungyang-Gun where the environment of rural villages is well maintained was chosen and researched to make data. These data of visual landscape elements were analysed by using the SPSS 12.0 for Windows. Relations of the visual component elements were analysed by the analysis for frequency and analysis for crosstab. From the above research we could conclude below results. Through review of the pre-researching and researching literatures, 11 types of visual component elements were selected such as the types of the gate, the looking through degree of the gate, the material of the gate, the color of the gate, the plan of the house, the material of the roof, a material of the wall, a color of the wall, the form of the penetration, the area to put, the area of a site, the year of the constructing a building. For the types of the gate, the gate from without the roof has been the most popular since it appeared 41.5%. For the looking through degree of the gate, a complete blockade form has been the most popular since it appeared 63.2%. For the material of the gate, the iron plate has been the most popular since it appeared 32.1%. For the color of the gate, color has been the most popular since it appeared 68.4%. For the plan of the house, 'ㄷ' form has beneath most popular since it appeared 38.3%. For the material of the roof. The Zinc has been the most popular since it appeared 51.9%. For a material of the wall, A cement mortar has been the most popular since it appeared 47.7%. For a color of the wall, Without tile color has hem the most popular since it appeared 67.0%. For the form of the penetration. The plain form has been the most popular since it appeared 54.0%. For tile area of a site, $100m^2{\sim}200m^2$ has been the most popular since it appeared 39.0%. The results of this study can provide to use of indicates four rural-housing reform. From now on, the results look forward to offering the meaning directions for the improvement of rural house gates.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.170-173
• /
• 2006

Recently, with increasing efficiency of DSC (photo-electrochemical using a nano-particle), The Performance of DSC solar generation system also needs improvement. The approach consists of a Fly-back DC-DC (transfer ratio 1:10) converter to boost the DSC cell voltage to 300VDC. The four switch (MOSFET) inverter is employed to produce 220V, 60Hz AC outputs. High performance, easy manufacturability, lower component count., safety and cost are addressed. Protection and diagnostic features form an important part of the design. Another highlight of the proposed design is the control strategy, which allows the inverter to adapt to the: requirements of the load as well as the power source. A unique aspect of the design is the use of the DSP TMS320LF2406 to control the inverter by current and voltage feed-back. Efficient and smooth control of the: power drawn from the DSC Cell is achieved by controlling the front end DC-DC converter in current mode.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.349-355
• /
• 2010

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This paper leads to separate a in-out data overload of integrated EPCIS event and suggests the method to effectively manage EPCIS repository for exchanging data smoothly. In order to verify a effectiveness, we measure the performance of the system using a simple testing simulation by comparing existing method and suggested method.