• 제목/요약/키워드: Four-Quadrant Operation

검색결과 39건 처리시간 0.028초

6 직렬 연결된 ITER VS 컨버터의 시퀀스제어 비교 해석 (Comparative Analysis of Sequence Control in Six Series-Connected ITER VS Converters)

  • 조현식;정진용;조종민;차한주
    • 전력전자학회논문지
    • /
    • 제19권5호
    • /
    • pp.399-406
    • /
    • 2014
  • This study investigates the structure and operation of the ITER VS converter and proposes a sequence control method for six series-connected VS converters to reduce reactive power. The operation and the proposed sequence control method are verified through RTDS simulation. The ITER VS converter must supply voltage/current to the superconducting magnets for plasma current vertical stabilization, and the four-quadrant operation must proceed without a zero-current discontinuous section. The operation mode of the VS converter is separated into a 12- and 6-pulse circulating current and transition modes according to the size of the load current. The output voltage of the unit VS converter is limited because of the rated voltage; however, the superconducting coil must increase the operating output voltage. Thus, the VS converter must be connected in a 6-series to provide the required operating output voltage. The output voltage of the VS converters is controlled continuously; however, reactive power is limited within a minimized value of the grid. In this study, the unit converter is compared with converters connected in a 6-series to determine a suitable sequence control method. The output voltage is the same in all cases, but the maximum reactive power is reduced from 100% to 73%. This sequence control method is verified through RTDS simulation.

여성형 유방증(Gynecomastia)의 개선된 수술적 치료방법: 팬 케이크 법(Pan-cake Method) (The Modified Surgical Treatment of Gynecomastia: Pan-cake Method)

  • 박진홍;이윤호
    • Archives of Plastic Surgery
    • /
    • 제34권5호
    • /
    • pp.628-634
    • /
    • 2007
  • Purpose: Subcutaneous mastectomy has been accepted as a standard for the treatment of gynecomastia. Surgical managements including ultrasound-assisted liposuction(UAL) have had limited success and several combined approaches were tried to find the most effective method. We designed a modified subcutaneous mastectomy, which we call "pan-cake method". The purpose of this study is to evaluate the results of our method for the treatment of gynecomastia. Methods: 16 patients from 16 to 31 years of age having gynecomastia were operated using the pan-cake method. 11 patients were in grade I, and 5 patients were in grade II, no patient were in grade III or IV, according to Rod's classification. The pan-cake method started with modified periareolar incision. We executed subcutaneous dissection first and suprafascial dissection next. After dividing the breast into four equal quadrants, we removed breast tissue from each quadrant as necessary. The operation time for the resection was recorded and the weight of removed parenchyme tissues was measured. Results: All the operations were successful. There were no asymmetries, contour deformities, or irregularities. Only 6 cases needed the combined therapy with ultrasound-assisted liposuction(UAL) because of the step deformities. The average operation time was 24.1 minutes and the average weight of removed breast tissue was 98.1g. All the patients were satisfied with the aesthetic results. Conclusion: We concluded that the pan-cake method is an alternative option for the surgical treatment of gynecomastia, giving good aesthetic results and relatively short operation time.

PWM-based Integral Sliding-mode Controller for Unity Input Power Factor Operation of Indirect Matrix Converter

  • Rmili, Lazhar;Hamouda, Mahmoud;Rahmani, Salem;Blanchette, Handy Fortin;Al-Haddad, Kamal
    • Journal of Power Electronics
    • /
    • 제17권4호
    • /
    • pp.1048-1057
    • /
    • 2017
  • An indirect matrix converter (IMC) is a modern power generation system that enables a direct ac/ac conversion without the need for any bulky and limited lifetime electrolytic capacitor. This system also allows four-quadrant operation, generation of sinusoidal output voltage waveforms with variable frequency and amplitude, and control of input power factor. This study proposes a pulse-width modulation-based sliding-mode controller to achieve unity input-power factor operation of the IMC independently of the active power exchanged with the grid, as well as a fast dynamic response. The designed equivalent control law determines, at each sampling period, the appropriate q-axis component of the modulated input current to be injected into the grid through the LC input filter. An integral term of the error is included in the expression of the sliding surface to increase the accuracy of the control method. A double space vector modulation method is used to synthesize the direction of the space vector of the input currents as required by the sliding-mode controller and the space vectors of the target output voltages. Simulation and experimental results are provided to show the effectiveness and evaluate the performance of the proposed control method.

멀티레벨 인버터와 다상 유도기를 이용한 견인기용 대전력 VSI의 구조와 특성 (Configurations of High Power VSI Drives for Traction Applications Using Multi Level Inverters and Multi Phase Induction Motors)

  • ;류홍제;김종수;임근희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 추계학술대회 논문집 학회본부
    • /
    • pp.500-504
    • /
    • 1997
  • Current source inverter drives of auto sequentially commutated type are very popular in high power applications, because of simple power circuit configuration with four quadrant operation. But the six-step current output create harmonic problems and the input power factor of such a drive is not always good. In this respect pulse width modulated drives using gate turn off thyristors ( GTO ) are finding application, especially in traction drives. However the switching and snubber loses of a GTO do not permit the inverter switching frequency go beyond a few hundred hertz.This will again introduce low frequency harmonic problems. Multi level inverters of the 3-level and 5-level can be considered as an alternative to overcome the low switching frequency harmonic problem of the 2-level GTO inverters. But with multi level inverters the complexity of the power circuit increases. In this paper a combination of multi level ( 2-level and 3-level ) inverters and multi phase induction motor ( 3-phase and 6-phase) configurations are presented for high power VSI drives for traction applications with reduced inverter switching frequency requirements coupled with reduced voltage rating for the power switch.

  • PDF

ITER CCU/L 컨버터의 4 상한 운전을 위한 제어의 구현 (Implementation of Control for Four quadrant Operation of ITER CCU/L Converter)

  • 박현철;김창우;이창희;박형진;조성만;오종석;서재학;최정완
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2015년도 추계학술대회 논문집
    • /
    • pp.225-226
    • /
    • 2015
  • 이 논문에서는 ITER 초전도 코일 전원 장치 중 진공 용기내에 형성된 자장의 오차를 보정해주는 CCU/L 컨버터의 4 상한 운전을 위한 제어 알고리즘을 설명하고, 제어 알고리즘을 실제 컨버터에 적용하여 구현하였다. ITER CCU/L 컨버터는 4 상한 제어를 통해 영 전류 불연속 구간 없이 Correction Coil에 전압(${\pm}85V$), 전류(${\pm}10kA$)를 공급해야 하고, 이를 위해선 4 상한 운전을 위한 제어가 매우 중요하다. 4 상한 운전은 다섯 가지 모드에서 동작된다. 본 논문에서, 각 모드에 대해 설명하고, 컨버터가 각 모드에서 정상적으로 제어되는지 시뮬레이션 및 실제 시험을 통해 검증하였다.

  • PDF

전지를 이용한 에너지저장시스템 개발 (The Development of Battery Energy Storage System)

  • 고요;엄영창;김윤호
    • 에너지공학
    • /
    • 제2권1호
    • /
    • pp.104-113
    • /
    • 1993
  • 전력수요의 지속적인 증가와 부하율이 점차 낮아짐에 따라 전력사용을 합리적이고 경제적으로 운용할 필요가 있다. 이를 위하여는 고속응성과 분산배치가 가능한 전력저장 시스템의 전력계통에의 적용 필요성이 대두되고 있다. 본 논문에서는 이와 같은 배경에서 전력저장 전지시스템의 전력계통에의 적용 가능성을 확인하기 위하여 시뮬레이터 형태의 20 kVA 전력저장 전지시스템의 설계, 제작 및 그 특성시험을 수행한 결과를 기술하였다. 전력저장 전지시스템은 전력을 직류로 저장하는 전지부와 전력을 직 ·교류 변화하고 계통과 연계하는 직·교변환부 그리고 이를 제어하는 제어부로 구성되어 있다. 전지부에서는 전력저장용의 새로운 연축전지 시스템을 설계·제작하였으며, 직·교변환부에서는 양방향 인버터 시스템을 적용하여 전지에의 충전과 방전을 글일 시스템으로 하여 충전기와 인버터 기능을 동시에 수행하도록 하였다. 또한 4상한 운전을 가능하게 하여 무효전력보상 기능도 수행하도록 하였다. 이 시스템은 MW시스템의 시뮬레이터 형태로 제작된 것으로 이 연구로부터 얻은 특성 시험 결과를 바탕으로 MW 시스템의 개념설계가 가능하다. 앞으로 전력저장 전지시스템은 수십 MW 시스템까지 구축될 전망이어서 본 연구는 이를 위한 준비 단계라고 할 수 있다.

  • PDF

Robotic lower pelvic port placement for optimal upper paraaortic lymph node dissection

  • Paek, Jiheum;Kang, Elizabeth;Lim, Peter C.
    • Journal of Gynecologic Oncology
    • /
    • 제29권6호
    • /
    • pp.87.1-87.4
    • /
    • 2018
  • Objective: Upper paraaortic lymph node dissection (UPALD) to the infrarenal level is one of the most challenging robotic procedures. Because robotic system has the limitation in robotic arm mobility. This surgical video introduces a novel robotic approach, lower pelvic port placement (LP3), to perform optimally and simultaneously both UPALD and pelvic procedures in gynecologic cancer patients using da Vinci Xi system. Methods: The patient presented with high-grade endometrial cancer. She underwent robotic surgical staging operation. For the setup of the LP3, a line was drown between both anterior superior iliac spines. At 3 cm below this line, another line was drown and four robotic ports were placed on this line. Results: After paraaortic lymph node dissection (PALD) was completed, the boom of robotic system was rotated $180^{\circ}$ to retarget for the pelvic lateral displacement. Robotic ports were placed and docked again. The operation was completed robotically without any complication. Conclusion: The LP3 was feasible for performing simultaneously optimal PALD as well as procedures in pelvic cavity in gynecologic cancer patients. The advantage of LP3 technique is the robotic port placement that affords for multi-quadrant surgery, abdominal and pelvic dissection. The LP3 is facilitated by utilizing advanced technology of Xi system, including the patient clearance function, the rotating boom, and 'port hopping' that allows using every ports for a camera. The LP3 will enable surgeons to extend the surgical indication of robotic surgical system in the gynecologic oncologic field.

요추궁절제술 후에 발생한 총장골동맥의 동정맥루에 대한 수술 (Surgical Treatment for Common Iliac Arteriovenous Fistula after Lumbar Laminectomy)

  • 류경민;유재욱;박성식;김석곤;서필원
    • Journal of Chest Surgery
    • /
    • 제40권6호
    • /
    • pp.455-458
    • /
    • 2007
  • 4개월 전 요추 4, 5번 추궁절제술을 시행받은 40세 남자환자가 호흡곤란과 하지부종을 주소로 내원하였다. 우측하복부에서 박동성 종괴가 촉진되었고 기계잡음이 청진되었다. 흉부단순촬영에서 심비대소견이 관찰되었고, 복부 전산화 단층촬영에서 제5요추 위치의 총장골동맥과 정맥간에 가성동맥류를 동반한 동정맥루가 존재하였다. 복부정중절개를 하여 동맥류를 통한 동정맥 누공의 일차봉합을 시도하여 상,하부 대동맥과 대정맥 감자결찰 후 동맥류를 절개하였으나 대량출혈이 발생하여 누공봉합에 실패한 후 동맥류를 봉합하였다. 동맥치환술로 수술계획을 변경한 후 동맥류에 연해있는 대동맥과 양측 총장골동맥을 절단봉합한 후, 인공도관을 이용하여 동맥을 재건하였고, 동맥류는 총장골정맥에 붙어있는 상태에서 축소성형술을 시행하였다. 환자는 수술 후 별다른 합병증 없이 8일째 퇴원하였고, 이후 별다른 문제없이 24개월간 추적관찰 중이다. 일반적으로 요추궁절제술 후 발생한 동정맥루에서는 누공봉합술을 시행하나 본 증례에서는 동맥치환술과 동맥류 축소성형술을 시행하였기에 문헌고찰과 함께 보고하는 바이다.

초기유방암에서 유방보존수술 후 방사선치료 : 중간분석 (Breast Conserving Operation and Radiation Therapy in Early Breast Cancer : Interim Analysis)

  • 김진희;김옥배;김유사
    • Radiation Oncology Journal
    • /
    • 제19권1호
    • /
    • pp.27-33
    • /
    • 2001
  • 목적 : 초기 유방암 (병기 I, II)에서는 유방 보존 수술과 방사선치료가 선호 받고 있는 치료법이다. 본원에서는 1992년부터 이러한 방법을 시행 중이며 실패양상과 미용효과 및 생존률을 알아보고자 하였다. 대상 및 방법 : 1992년 1월부터 1997년 12월까지 계명대학교 동산의료원에서 유방 보존 수술과 방사선치료를 받은 초기 유방암환자 72명을 대상으로 하였다. 연령분포는 $25\~77$세(중앙값 43세)이었고 TNM 병기는 0기 5명, I기 33명, IIa기 25명, IIb기 9명이었다. 모든 환자는 유방의 부분절제술과 동측 액와림프절 곽청술을 시행하고 방사선치료를 하였다. 유방의 방사선치료는 동측 전체 유방에 6 MV 광자선으로 $50\~54\;Gy$를 5주에서 6주간에 조사하였고 원발병소에 추가 방사선은 전자선으로 $10\~16\;Gy$를 1주에서 2주간 조사하였다. 항암화학요법은 41명에서 방사선치료 전후에 시행하였다. 미용효과는 환자의 만족도를 매우좋음, 좋음, 만족할만함, 불만족의 4단계로 설문조사를 시행하였다. 추적관찰기간은 22개월에서 91개월로 중앙값이 40개월이었다. 결과 : 전체환자의 5년 무병생존률은 $95.8\%$ 이었다. 병기별로는 0기에는 $100\%$, I기에는 $96.9\%$, IIa기에는 $96\%$, IIb기에는 $88.9\%$이었다. 2명에서 원격전이가 있었으며 1명에서 동시재발이 있었다. 원격전이 환자 중 1명에서는 방사선 치료 후 14개월에 골, 간에 있었고 1명에서는 21개월에 폐와 양측 쇄골상 림프절에 전이되었다. 동시재발환자는 14개월에 동측 유방의 다른 사분역에 재발하여 유방전절제술과 항암화학요법을 시행하고 44개월에 뇌전이로 방사선치료와 항암화학요법을 시행하였으나 55개월 째 사망하였다. 부작용으로는 4명에서 무증상의 폐렴양 음영이 흉부 X선 촬영에서 보였고 1명에서 증상을 동반한 방사선폐렴이 있었고 4명$(5\%)$에서 경미한 정도의 손부종이나 팔 부종이 있었다. 미용결과는 설문에 응답한 59명중 51명$(86\%)$에서 좋음에서 매우 좋음으로 나타났다. 결론 : 이상의 결과로 초기 유방암에서 유방보존수술과 방사선치료는 안전한 치료방법이며 우수한 생존률과 미용 결과를 보인다고 생각되며 향후 장기추적관찰을 통해 예후 인자의 분석이 필요 할 것으로 사료된다.

  • PDF