• 제목/요약/키워드: Four beam interference

검색결과 15건 처리시간 0.022초

용접조립 각형 CFT 기둥-보 외다이아프램 접합부의 구조 거동 (Structural Behavior of Welded Built-up Square CFT Column to Beam Connections with External Diaphragm)

  • 이성희;김영호;최성모
    • 한국강구조학회 논문집
    • /
    • 제28권2호
    • /
    • pp.75-83
    • /
    • 2016
  • 기존 콘크리트충전 각형강관(CFT) 구조에 사용하는 각형강관은 4개의 판을 용접하여 제작하는 박스칼럼이 일반적이다. 그러나 이러한 강관은 제작효율이 저하되며, 또한 기둥-보 접합부에는 내측 다이아프램과 관통 다이아프램을 용접하는데 특수한 용접기술이 필요하다. 따라서, 얇은 강판을 절곡하는 방식으로 응력집중 위치의 용접을 피하고, 단면효율이 극대화된 내부앵커 돌출형의 용접조립 각형강관을 개발하게 되었다. 용접조립 각형강관은 강관내부에 스티프너가 설치되어 내측 다이아프램과 관통 다이아프램과 간섭이 발생하게 되므로 본 연구에서는 용접조립 각형CFT 기둥-보 접합부로 외다이아프램형식을 채택하고 외다이아프램의 설계식을 제안하였으며, 기둥-보 접합부의 거동을 파악하기 위해 실대형 4개 실험체를 제작하여 구조거동 및 내력을 분석하였다.

FET 스위치를 이용한 2.6 GHz 용 SPA 안테나 설계 (Design of SPA Antenna Using FET Switch for 2.6 GHz)

  • 강현상;박영일;용환구;김병성
    • 한국전자파학회논문지
    • /
    • 제23권10호
    • /
    • pp.1137-1144
    • /
    • 2012
  • 본 논문에서는 펨토셀에서 기기 간의 상호 간섭을 해결하기 위해 2.6 GHz Wimax 밴드용 switched parasitic array(SPA) 안테나를 설계하였다. 설계한 SPA 안테나는 방사체(radiator)로 동작하는 단일 급전 ${\lambda}/4$ 모노폴 안테나가 중앙에 있고, 스위칭에 따라 반사체(reflector)와 유도체(director)로 동작하는 4개의 기생소자가 이를 둘러싸고 있으며, 이들 기생소자는 개방된 모노폴이 각각 둘러싸고 있다. 본 논문에서는 기존의 PIN 다이오드가 아닌 RF FET 스위치를 사용하여 빔 조향을 함으로써 간단한 구조의 저가, 저전력 안테나를 설계하였으며, 스위치의 특성에 따른 SPA 안테나의 성능을 분석하였다. 제작한 안테나의 크기는 반지름 65 mm, 높이 35 mm이고, 2.6 GHz에서 전후방비가 15 dB 이상이며, 스위칭에 따라서 8방향으로 빔 조향이 가능하다.

Measurement of aerodynamic coefficients of tower components of Tsing Ma Bridge under yaw winds

  • Zhu, L.D.;Xu, Y.L.;Zhang, F.;Xiang, H.F.
    • Wind and Structures
    • /
    • 제6권1호
    • /
    • pp.53-70
    • /
    • 2003
  • Tsing Ma Bridge in Hong Kong is the longest suspension bridge in the world carrying both highway and railway. It has two H-shape concrete towers, each of which is composed of two reinforced concrete legs and four deep transverse prestressed concrete beams. A series of wind tunnel tests have been performed to measure the aerodynamic coefficients of the tower legs and transverse beams in various arrangements. A 1:100 scaled 3D rigid model of the full bridge tower assembled from various tower components has been constructed for different test cases. The aerodynamic coefficients of the lower and upper segments of the windward and leeward tower legs and those of the transverse beams at different levels, with and without the dummy bridge deck model, were measured as a function of yaw wind angle. The effects of wind interference among the tower components and the influence of the bridge deck on the tower aerodynamic coefficients were also investigated. The results achieved can be used as the pertinent data for the comparison of the computed and field-measured fully coupled buffeting responses of the entire bridge under yaw winds.

Optical-fiber Electronic Speckle Pattern Interferometry for Quantitative Measurement of Defects on Aluminum Liners in Composite Pressure Vessels

  • Kim, Seong Jong;Kang, Young June;Choi, Nak-Jung
    • Journal of the Optical Society of Korea
    • /
    • 제17권1호
    • /
    • pp.50-56
    • /
    • 2013
  • Optical-fiber electronic speckle pattern interferometry (ESPI) is a non-contact, non-destructive examination technique with the advantages of rapid measurement, high accuracy, and full-field measurement. The optical-fiber ESPI system used in this study was compact and portable with the advantages of easy set-up and signal acquisition. By suitably configuring the optical-fiber ESPI system, producing an image signal in a charge-coupled device camera, and periodically modulating beam phases, we obtained phase information from the speckle pattern using a four-step phase shifting algorithm. Moreover, we compared the actual defect size with that of interference fringes which appeared on a screen after calculating the pixel value according to the distance between the object and the CCD camera. Conventional methods of measuring defects are time-consuming and resource-intensive because the estimated values are relative. However, our simple method could quantitatively estimate the defect length by carrying out numerical analysis for obtaining values on the X-axis in a line profile. The results showed reliable values for average error rates and a decrease in the error rate with increasing defect length or pressure.

GPS 수신기를 위한 3 차원 배열 안테나의 도래각 추정 및 빔 형성 성능 분석 (Performance analysis of DOA estimation and beamforming in 3-dimensional array antenna for GPS receiver)

  • 이종현;김석중;임승각
    • 대한전자공학회논문지TC
    • /
    • 제44권4호
    • /
    • pp.88-94
    • /
    • 2007
  • 본 논문은 GPS 수신기에서 간섭 제거를 통한 성능 개선을 목적으로 3 차원 배열 안테나를 이용한 DOA ( Direction Of Arrival ) 추정과 빔 형성 성능 분석에 관한 것이다. GPS 수신기에 배열 안테나를 이용하면 신호 도래 방향의 DOA 를 추정한 후, 공간 필터링을 이용하여 원하는 방향으로 주빔과 널을 형성하므로서 재머 ( jammer ) 신호를 제거할 수 있으므로 시스템의 성능을 높힐 수 있게된다. 본 논문에서는 5 가지의 3 차원 배열 안테나 구조를 제안한 후 도래 신호의 DOA 를 추정키위한 MUSIC 알고리즘을 적용할 경우 추정 오차 및 빔 형성의 성능을 제시하였다. DOA 성능 분석을 위하여 DOA 추정 오차를 계산하였으며 빔 형성 성능 분석을 BER 을 사용하였다. 특히 빔 형성 성능 분석에서는 다양한 jammer 전력과 GPS 신호의 존재 및 각도 퍼짐등을 고려하였다. 컴퓨터 시뮬레이션의 결과 제안된 3차원 배열 안테나에서 Curved (B) 7-element 안테나가 DOA 추정, 추정 오차 및 BER 특성과 각도 퍼짐에서 다른 배열 안테나보다 우수한 특성을 얻을 수 있었다.