• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.68-78
• /
• 2008

This paper introduces a complete package for SRM drive on Power System Computer-Aided Design/Electromagnetic Transients (PSCAD/EMTDC). A three-phase SRM drive is modeled and simulated on PSCAD. The motor is modeled using an accurate nonlinear analytical model that takes into consideration the machine nonlinearities. A current control algorithm is applied for torque ripple minimization to achieve a smooth output torque which is necessary for high performance applications. The motor drive is tested for four-quadrant operations. The modeled SRM is capable of operating as a motor or generator during clockwise and counterclockwise motions. The proposed package helps in understanding the operational principles of switched reluctance motors, investigating the dynamic characteristics of SRM drives, and achieving a high performance dynamic control task.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.3058-3060
• /
• 2005

In this paper, the CMOS four-quadrant analog multipliers for low-voltage low-power applications are presented. The circuit approach is based on the characteristic of the LV (Low-Voltage) composite transistor which is one of the useful analog building blocks. SPICE simulations are carried out to examine the performances of the designed multipliers. Simulation results are obtained by $0.25{\mu}m$ CMOS parameters with 2V power supply. The LV composite transistor can easily be extended to perform a four-quadrant multiplication. The multiplier has a linear input range up to ${\pm}0.5V$ with a linearity error of less than 1%. The measured -3dB bandwidth is 290MHz and the power dissipation is $37{\mu}W$. The proposed multiplier is expected to be suitable for analog signal processing applications such as portable communication equipment, radio receivers, and hand-held movie cameras.

• 전력전자학회논문지
• /
• 제8권3호
• /
• pp.285-291
• /
• 2003

스위치드 릴럭턴스 전동기는 고출력, 고효율 및 직권전동기 구동특성 등으로 견인구동용으로 주목받고 있다. 그러나 전동기를 4상한 구동하기 위한 발전영역에서 제어는 쉽지 않다. 본 논문은 전류제한법에 의해 안정된 발전제동이 가능한 제어방식을 제안하였다. 전동기 구동시는 기준전류제한방식과 위상각 제어방식으로 속도제어를 행하고, 발전제동모드에서는 상전류가 발산하지 않는 조건을 산정하여서 이 값을 기준전류로 한 전류제한방식을 채택하였다. 시뮬레이션과 실험에 의해 제안한 방식의 타당성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.240-244
• /
• 1989

This paper describes an electric vehicle DC-DC drive system capable of delivering motoring current and of generating braking current. The power transistor chopper Is adopted to operate a DC series motor. The transistor chopper adopted, a high chopping frequency and avoids additional inductance In series with the armature winding. The four-quadrant drive is applied to save the energy. The energy saving is critical in operating the Independent power source electric vehicle. Using software simulation, regeneration and braking characteristics are investigated. The microprocessor-based controller is used to operate the whole system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.739-742
• /
• 2002

This article proposes a Four-Quadrant Analog Multiplier (4-QAM) applying switched-capacitor and pulse-width amplitude modulation (PWAM) principles. The features of the presented circuit are that it can function as analog multiplier with a wide dynamic range of input signal and no disturbing from deviation of carrier frequency of PWM signal. In addition, the circuit detail is simpler than that of the previously proposed circuits. It is then easy and applicable for employing it into Integrated Circuit (IC) realization to especially operate in low-frequency and low-power applications. The experimental results granted are in correspondence to the theoretical analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.414-419
• /
• 1998

This paper describes the dynamical performance of a four-quadrant circulation current mode control of dc motor drive, using the controlled flywleeling technique, a four-quadrant closed-loop control drive with an inner current control loop and a speed fuzzy PI regulator is designed. The obtained computer simulation results of a dc motor drive below and above the base speed are demonstrated. These result show that compare to a conventional dual-converter-fed dc motor drive with simultaneous control, the overal system performance has been improved and also, agood stability and robstness has been achieved.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.146-155
• /
• 2009

The static frequency converter (SFC) systems are used as a method of driving large synchronous machines in many power and industrial plants. In this paper, new control algorithms of SFC systems for starting gas turbo sets are proposed for a four quadrant operation: start-up at standstill; an acceleration up to the speed of the rated voltage; field weakening to reach the rated speed; synchronization to the main alternating current (AC) source; and dynamic braking to stop safely within the rating of the synchronous machine. Experimental results show that the proposed algorithms are proper and effective.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권3호
• /
• pp.161-163
• /
• 2020

Myringotomy and ventilation tube insertion are widely performed in pediatric patients with chronic otitis media. This procedure is performed under general anesthesia or sedation with local anesthesia infiltration in pediatric patients. In this case report, we report a case of transient facial paralysis in a pediatric patient who underwent myringotomy and ventilation tube insertion using sevoflurane inhalation and four-quadrant blocks with lidocaine.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1569-1576
• /
• 2014

This paper mainly proposes a direct torque control strategy to minimize torque ripple in brushless DC (BLDC) motor. BLDC motor has large current and torque ripple when one voltage vector applied in one cycle due to its low inductance. Hence, this paper proposed a hysteresis torque control with PWM mode to control the resultant torque. Moreover, when the direct torque control system is operating during the two-phase half-bridge $120^{\circ}$ conduction mode, large torque ripple in commutation area appears every 120 electrical degree. Based on analyzing the root of torque ripple in detail, lookup tables of switching devices states for new half-bridge modulation mode in the positive and negative reference torque put forwarded. Finally, simulations by MATLAB software and experiment results from DSP are presented to verify the feasibility and effectiveness of the proposed strategy operating in four-quadrant operation.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.367-374
• /
• 2006

본 연구에서는 국내 철도건널목의 지장물 검지 시스템 및 차단제어 시스템의 운영현황을 살펴봄으로써 기존 시스템의 문제점을 보완할 수 있는 새로운 건널목 제어시스템 및 알고리즘을 제시한다. 국내 건널목 제어시스템의 경우 차량 및 지장물 검지를 통해 단순 입구측 및 출구측을 제어하는 방식으로서 도로 교통과는 연계를 하지 못하고 있는 실정이다. 또한 검지시스템과 차단시스템의 신호연계체계의 미비로 인하여 비효율적이며 안전성이 결여된 건널목 운영을 보이고 있다. 본 연구에서는 보다 효율적인 건널목 운영을 위하여 지자계 검지센서와 레이저 검지센서를 통합한 철도 건널목 지장물 진입위반차량 검지시스템과 4분할차단기 알고리즘을 제시하였고, 현장시험을 통하여 본 연구에서 제시한 알고리즘의 신뢰성을 검증하였다. 그 결과 본 연구에서 개발되어진 시스템들은 철도 건널목 제어기기들간의 상호연계가 가능하며, 동시에 차량운전자의 운행 형태를 고려한 차단제어 방식으로 열차와의 충돌사고를 예방할 수 있으리라 기대되어진다.