• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.105-108
• /
• 2002

Highly swept leading edge extension(LEX) applied to delta wings has greatly improved the subsonic maneuverability of contemporary fighters. In this study, systematic approach by PIV experimental method within a circulating water channel was adopted to study the fundamental characteristics of induced vortex generation, development and its breakdown appearing on a delta wing model with or without LEX in terms of four angles of attack$(15^{\circ},\;20^{\circ},\;25^{\circ},\;30^{\circ})$ and six measuring sections$(30\%,\;40\%,\;50\%,\;60\%,\;70\%,\;80\%)$ of chord length. Distributions of time-averaged velocity vectors and vorticities over the delta wing model were compared along the chord length direction. High-speed CCD camera which made it possible to acquire serial images is able to get the detailed information about the flow characteristics occurred on the delta wing. Especially quantitative comparison of the maximum vorticity featuring the induced pressure distribution were also conducted to clarity the significance of the LEX existence.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.580-585
• /
• 2005

A QRT(Quad-Rotor Type) hovering robot system is developed for quick detection and observation of the circumstances under calamity environment such as indoor fire spots. The UAV(Unmanned Aerial Vehicle) is equipped with four propellers driven by each electric motor, an embedded controller using a DSP, INS(Inertial Navigation System) using 3-axis rate gyros, a CCD camera with wireless communication transmitter for observation, and an ultrasonic range sensor for height control. The developed hovering robot shows stable flying performances under the adoption of RIC(Robust Internal-loop Compensator) based disturbance compensation and the vision based localization method. The UAV can also avoid obstacles using eight IR and four ultrasonic range sensors. The VTOL(Vertical Take-Off and Landing) flying object flies into indoor fire spots and sends the images captured by the CCD camera to the operator. This kind of small-sized UAV can be widely used in various calamity observation fields without danger of human beings under harmful environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.410-414
• /
• 1996

A visual servoing algorithm is proposed for a robot with a camera in hand. Specifically, novel image features are suggested by employing a viewing model of perspective projection to estimate relative pitching and yawing angles between the object and the camera. To compensate dynamic characteristics of the robot, desired feature trajectories for the learning of visually guided line-of-sight robot motion are obtained by measuring features by the camera in hand not in the entire workspace, but on a single linear path along which the robot moves under the control of a, commercially provided function of linear motion. And then, control actions of the camera are approximately found by fuzzy-neural networks to follow such desired feature trajectories. To show the validity of proposed algorithm, some experimental results are illustrated, where a four axis SCARA robot with a B/W CCD camera is used.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.177-182
• /
• 1997

A visual servoing method is proposed for a robot with a camera in hand. Specifically, vanishing point features are suggested by employing a viewing model of perspective projection to calculate the relative rolling, pitching and yawing angles between the object and the camera. To compensate dynamic characteristics of the robot, desired feature trajectories for the learning of visually guided line-of-sight robot motion are obtained by measuring features by the camera in hand not in the entire workspace, but on a single linear path along which the robot moves under the control of a commercially provided function of linear motion. And then, control actions of the camera are approximately found by fuzzy-neural networks to follow such desired feature trajectories. To show the validity of proposed algorithm, some experimental results are illustrated, where a four axis SCARA robot with a B/W CCD camera is used.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.62.2-62.2
• /
• 2010

The CQUEAN (Camera for QUasars in EArly uNiverse) is an optical CCD camera optimized for the observation of high redshift QSOs to understand the nature of early universe. The focal reducer, which is composed of four spherical lens, is allowed to secure a wider field of view for CQUEAN, by reducing the focal length of the system by one third. We designed the lens configuration, the lens barrel, and the adapters to assemble to attach focal reducer to the CCD camera system. We performed tolerance analysis using ZEMAX. The manufacturing of the focal reducer system and its lab test of optical performance were already finished. It turned out that the performance can meet the original requirement, with the aberration and alignment error taken into account. We successfully attached the focal reducer and CQUEAN to the cassegrain focus of 2.1m telescope at McDonald Observatory, USA, and several tests of CQUEAN system were carried out. In this presentation, I will show the process of focal reducer fabrication and the result of performance test.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.663-673
• /
• 2007

This paper presents a new moving obstacle detection method using an optical flow in mobile robot with an omnidirectional camera. Because an omnidirectional camera consists of a nonlinear mirror and CCD camera, the optical flow pattern in omnidirectional image is different from the pattern in perspective camera. The geometry characteristic of an omnidirectional camera has influence on the optical flow in omnidirectional image. When a mobile robot with an omnidirectional camera moves, the optical flow is not only theoretically calculated in omnidirectional image, but also investigated in omnidirectional and panoramic images. In this paper, the panoramic image is generalized from an omnidirectional image using the geometry of an omnidirectional camera. In particular, Focus of expansion (FOE) and focus of contraction (FOC) vectors are defined from the estimated optical flow in omnidirectional and panoramic images. FOE and FOC vectors are used as reference vectors for the relative evaluation of optical flow. The moving obstacle is turned out through the relative evaluation of optical flows. The proposed algorithm is tested in four motions of a mobile robot including straight forward, left turn, right turn and rotation. The effectiveness of the proposed method is shown by the experimental results.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.113-119
• /
• 2006

We need a good image of the retina of the human eye in order to inspect or cure it. In this work, an optical system design for a retinal camera is studied and the finite schematic eye model made by Sang Gee Kim and Sung Chan Park is used. The optical system is composed of four lens groups. The rays of the entire object field are collected on the center by the 1st group and the objective is imaged by all the other groups. The image is detected by the CCD array and displayed by a monitor The 1st lens group is employed singlet and other groups are employed triplets. Ray aberrations, spot diagrams, diffraction line spread functions and MTFs are calculated for optical performance assessment. This design may be very useful for the development of a retinal camera with high performance.

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.15-22
• /
• 2000

A monitoring and the forecasting system for the swine delivery was developed using CCD camera multi-function board microphone and data-recorder equipped on a personal computer. For the swine delivery monitoring and forecasting factors four factors were selected such as genitalia swine body shape breast color and sound. Image of physical variation of body shape, shape and color of genitalia area and color of breast of pregnant sow were grabbed using the CCD color camera and multi-function board and variation of voice of pregnant sow was acquired using microphone and data recorder. Acquired information of image and voice were analyzed using a custom developed algorithm and program. The result of the forecasting efficiency of swine delivery was 89%, 71% and 100% using the variation of genitalia are the body shape and the voice of pregnant sow. respectively. The efficiency of image processing was 100% for the delivery detection when the piglet was delivered half of its body from genitalia of pregnant sow, The monitoring and forecasting system informed the estimated time of the delivery of swine to a farm manager immediately if an estimated and established time set by the farm manager was the same and/or the estimated time ws earlier than the established time and the system detected the delivery.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.825-827
• /
• 2003

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/ offset and on-board image data compression/storage. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the architecture and function of MSC hardware including electrical interface and the operation concept which have been established based on the mission requirements are described. And the design and the preparation of MSC system operation are analyzed and discussed.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.65-73
• /
• 1996

Flame propagation in a four-valve spark-ignition optical engine was visualized under lean-bum conditions with A/F=18 at 2000rpm. The early flame development in a four-valve pentroof-chamber single-cylinder engine was examined with imaging of the laser-induced Mie scattered light using an image-intensified CCD camera. Flame profiles along the line-of-sight were also visualized through a quartz piston window. Two-dimensional flame structures were visualized with a Proxitronic HF-1 fast motion camera system by Mie scattering from titanium dioxide particles along a planar laser sheet generated by a copper vapor laser. The flame propagation images were subsequently analysed with an image processing programme to obtain information about the flame structure under different tumble flow conditions generated by sleeved and non-sleeved intake ports. This allowed enhancement of the flame images and calculation of the enflamed area, and the displacement of its center, as a function of the tumble flow induced by the pentroof-chamber in the vicinity of spark plug. Image processing of the early flame development quantified the correlation between flame and flow characteristics near the spark plug at the time of ignition which has been known to be one of the most important factors in cyclic combustion variations in lean-burn engines. The results were also compared with direct flame images obtained from the natural flame luminosity of the lean mixture.