• 한국정보전자통신기술학회논문지
• /
• 제15권6호
• /
• pp.485-491
• /
• 2022

정맥주사는 입원환자에게 가장 빈번하게 행해지는 침습적 처치로서 비경구 영양투여, 혈액제제 등의 투입 등에 광범위하게 이용되고 있으며 이외에도 말초 카테터 삽입, 채혈, 기타 IV 요법에 사용되는 시술로서 연간 10억 건 이상이 발생한다. 정맥주사는 정맥주사 교육을 받은 숙련된 간호사들에 의해서만 시술되는 어려운 시술 중에 하나이며 실패 시 정맥에 혈전증 및 혈종이나 신경 손상 등을 초래할 수 있다. 이에 정맥주사 시 실수를 줄이기 위해 손등이나 팔의 정맥 구조를 시각화할 수 있는 보조 장비들에 대한 연구들이 발표되고 있다. 본 연구는 정맥주사 시 정맥을 시각화하는 정맥 검출기에 850nm 파장대를 조사하는 LED의 수량에 따른 성능 차이에 대한 연구이다. 피부 위에 조사된 NIR 검출기능이 있는 CCD 및 CMOS 카메라 렌즈에 NIR Filter 부착하여 영상을 획득하고 획득된 영상을 영상처리 알고리즘을 통해 정맥 이미지를 선명화하고 선명화된 이미지를 피부 위에 투영하는 원리로 작동되는 정맥 검출기를 제작한 이후 제작된 정맥 검출기 앞단에 NIR LED 수량에 차이를 주어 4가지 LED PCB를 제작했다. 이후 각각의 PCB를 정맥 검출기 앞단에 부착하여 정맥 영상을 검출하고 성능평가를 위해 획득한 정맥 영상을 바탕으로 성능 비교 설문지를 만들어 설문을 실시했다. 설문은 K병원에 재직 중인 간호사 20명을 대상으로 진행했다.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.17-35
• /
• 2004

The purpose of this study is to explain developmental process of gait via angle-angle diagram to understand how coordinated relationships and control change with age. Twenty four female children, from one to five years of age were the test subjects for this study, and their results were compared to a control group consisting of twenty one adult females. The Vicon 370 CCD camera, VCR, video timer, monitor, and audio visual mixer was utilized to graph the gait cycle for all test subjects. Both coordinated Intra-limb relationships, and range of motion and timing according to quadrant were explained through the angle angle diagram. Movement in the sagittal plane showed both coordinated relationships and control earlier than movement in the coronal or transverse plane. In the sagittal plane, hip and Knee coordinated relationships developed first (from one year of age.) Coordinated relationships in the Knee and ankle and hip and ankle developed next, respectively. Both hip and ankle and knee and ankle development were inhibited by the inability of children to completely perform plantar flexion during the swing and initial double limb support phases. Children appeared to compensate for this by extending at their hip joint more than adults during the third phase, final double limb support. In many cases the angle angle diagram for children had a similar shape as adult's angle angle diagram. This shows that children can coordinate their movements at an early age. However, the magnitudes and timing of children's angle angle diagrams still varied greatly from adults, even at five years of age. This indicates that even at this age, children still do not possess full control of their movements.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.21-27
• /
• 2015

In this study, interfacial characteristics between SOFC and Ag paste as current collector was estimated in the high temperature environment. The Ag paste was used to connect the unit cell of SOFC strongly with interconnector and provide the electrical conductivity between them. To confirm electrical conductivity, Ag paste was treated in the furnace at $800^{\circ}C$ for 48 hours. The sheet resistance of Ag paste was measured to compare the resistance values before and after the heat treatment. Also, the four-point bending test was performed to measure the interfacial adhesion. The unit cell of SOFC and $SiO_2$ wafer were diced and then attached by Ag paste. The $SiO_2$ wafer had the center notch to initiate a crack from the tip of the notch. The modified stereomicroscope combined with the CCD camera and system for measuring the length was used to observe the fracture behavior. To compare the characteristics before heat treatment and after heat treatment, the specimen was exposed in the furnace at $800^{\circ}C$ for 48 hours and then the interfacial adhesion was evaluated. Finally, the interfacial adhesion energy quantitatively increases $1.78{\pm}0.07J/m^2$ to $4.9{\pm}0.87J/m^2$ between the cathode and Ag paste and also increase $2.9{\pm}0.47J/m^2$ to $5.12{\pm}1.01J/m^2$ between the anode and Ag paste through the high temperature. Therefore, it is expected that Ag paste as current collector was appropriate for improving the structural stability in the stacked SOFC system if the electrical conductivity was more increased.

• Journal of Biosystems Engineering
• /
• 제26권3호
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• 한국분무공학회지
• /
• 제5권1호
• /
• pp.5-12
• /
• 2000

The beneficial aspects of applying emulsion fuels to combustion systems may be due to the changes of fuel properties which lead to the enhanced atomization characteristics. The spray characteristics of water/oil emulsified fuel injected from the pressure-swirl(simplex) atomizer using for oil burner were investigated. Four different water contents from 10 to 40 % by volume at 10% increment were prepared by mixing with the different contents of surfactants. Total amount of surfactant used was varied from 1 to 3 % by volume. This study demonstrates the influence of water and surfactant contents of emulsified fuel, injection pressure on the spray characteristics, i.e. Sauter mean diameter(SMD) and spray angle. The drop size distribution of the emulsified fuel spray was measured with a Malvem particle sizer. In order to measure the spray angle, the digital image processing was employed by capturing multiple images of the spray with 3-CCD digital video camera. It was evident that the addition of water and surfactant changes fuel properties which are the key parameters influencing the atomization of the spray. The increase in surfactant content results in the decrease of SMD and the increase in spray angle. The droplets decease with increase in injection pressure, but the influence of injection pressure in this experimental condition was less important than expected. The more viscous fuel with the increase of water content exhibits the larger droplets in the centerline of the spray, and the less viscous fuel in the outer edges of the spray. The increase in axial position from the nozzle causes the spray angle to decrease. The spray angle decreases with increase in water content. This is due to increase in viscosity with increase in water content.

• 천문학회보
• /
• 제43권1호
• /
• pp.69.4-70
• /
• 2018

KAOS30 is an automatic observing software for the wide-field 10-inch telescope as a piggyback system on the 30-inch telescope at the McDonald Observatory in Texas, US. The software has four packages in terms of functionality and is divided into communication with Telescope Control System (TCS), controlling of CCD camera and filter wheel, controlling of focuser, and script for automation observing. Each interconnect of those are based on exe-exe communication. The advantage of this distinction is that each package can be independently maintained for further updates. KAOS30 has an integrated control library that combines function library connecting each device and package. This ensures that the software can extensible interface because all packages are access to the control devices independently. Also, the library includes the ASCOM driver platform. ASCOM is a standard general purpose library that supports Application Programming Interface (API) of astronomical devices. We present the software architecture of KAOS30, and structure of interfacing between hardware and package or package and package.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.1031-1038
• /
• 2002

The pressure sensitive paint (PSP) has recently received a considerable attention in the fields of aerodynamics and fluid mechanics as a new revolutionary optical technique to measure pressure fields on a body surface. In this study, the feasibility and effectiveness of the PSP pressure field measurement technique have been investigated experimentally. Seven different PSP formulations including two porphyrins(PtOEP and PtTFPP) and four polymers(Polystyrene, cellulous acetate butyrate, GP-197 and Silicon-708) were tested to check the performance and characteristics of each combination. The static calibration of each PSP formulation was carried out in a constant-pressure chamber. The PSP technique was applied to an oblique impinging jet flow to measure variation of pressure field on the impinging plate at on oblique jet angle of ${\theta}=60^{\circ}$. Pressure field images were captured by an 12bit intensified CCD(ICCD, $1K{\times}1K$)camera. As a result, the dynamic response of PSP depends on the oxygen permeability of polymer and the photochemical interaction between luminophore and polymer as well as the reaction of luminophore itself. The reaction of luminophore was changed by employing different polymers. In conclusion, Among 7 PSP formulation tested, the combination of PtTFPP and cellulous acetate butyrate show the best performance. In addition, the detail pressure field of an oblique high-speed impinging jet was measured effectively using the PSP technique.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.263-272
• /
• 2001

저광도 중합법, 펄스 지연 중합법, 초고광도 중합법 등의 광조사 방식이 광중합형 복합레진 수복물에서의 중합수축 응력에 미치는 영향을 알아보기 위해 in vitro에서 미세 누출 실험을 하였다. 80개의 발거된 소구치의 협측면에 5급 와동을 형성하고, 600mW/$cm^2$로 30초간 광조사하는 보통 광도 중합군, 300mW/$cm^2$로 60초간 광조사하는 저광도 중합군, 400mW/$cm^2$로 2초간 광조사하고 5분간 기다린 후 800mW/$cm^2$로 10초간 최종 중합시키는 펄스-지연 중합군, 그리고 1930mW/$cm^2$의 광도로 3초간 광조사하는 초고광도 중합군 등의 4개의 군으로 나누어 hybrid 형의 광중합복합레진을 충전하고 각 군의 방법대로 중합한 후, 변연의 0.5mm 외부에 nail varnish를 도포하고 37$^{\circ}C$, 2% metylene blue 용액에 24시간 동안 침적시켰다. 시편을 아크릴릭 레진에 매몰한 후 수복물의 중앙에서 종절단하여 입체현미경하에서 그 단면을 관찰한 후 법랑질과 상아질 변연으로 나누어 색소의 침투도를 측정하여 다음과 같은 결과를 얻었다. 1. 펄스 지연 중합군의 색소 침투도는 법랑질과 상아질 변연 모두에서 보통광도, 저광도 및 초고광도 중합군과 유의한 차이를 보이지 않았다(p>0.05). 2. 상아질 변연에서 초고광도 중합군은 보통광도 중합군과 저광도 중합군에 비해 유의하게 높은 색소 침투도를 보였다(p<0.05). 3. 법랑질 변연에서의 4개 군의 색소 침투도는 서로 유의한 차이를 보이지 않았다(p>0.05). 4. 모든 군에서 상아질 변연에서의 색소 침투도는 법랑질군에서의 색소 침투도에 비해 유의하게 높았다(p<0.05).

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.259-265
• /
• 2010

연구 목적: $\beta$-Tricalcium phosphate/Hydroxyapatite ($\beta$-TCP/HA) 입자가 혼합된 합성 골 이식재의 particle size가 토끼의 두개골에서 타이타늄 메쉬를 이용해 시행된 골유도 재생술의 결과에 미치는 영향을 평가하고자 하였다. 연구 재료 및 방법: 여섯 마리의 수컷 뉴질랜드 산 백토끼 (5 kg)를 이용하여 실험 하였다. 토끼 두개골의 정 중앙을 절개하고 전층 판막을 형성하여 박리하였다. 두개골의 네 부위에 6 mm 직경의 트레핀 바 (XTP 5406; Dentium, Seoul, Korea)로 원형의 홈을 형성한 후 blood supply를 위해 원형의 홈안에 1 mm 직경의 라운드 바로 다섯 개의 작은 구멍을 형성하였다. 형성된 네 개의 홈 위에 표준화되어 맞춤 제작된 반구형 타이타늄 메쉬 (높이 3 mm, 직경 6 mm; Dentium, Seoul, Korea)를 위치시키고 세 개의 2 mm 길이의 티타늄 핀 (Dentium, Seoul, Korea)을 이용하여 고정하였다. 대조군은 이식재를 포함시키지 않았고 나머지 타이타늄 메쉬들은 실험군으로서 서로 다른 세 가지 크기의 이식재를 각각 담아서 고정하였다. 이식재 ($Osteon^{(R)}$, Dentium, Seoul, Korea)의 성분은 HA와 $\beta$-TCP ($\beta$-TCP/HA)가 혼합되어 있는 합성골 이식재이며 실험군으로 사용한 이식재의 크기는 각각 small (0.3 - 0.5 mm), medium (0.5 - 1.0 mm), large (1.0 - 2.0 mm) size 였다. 8주의 치유기간 후에 토끼를 희생시킨 후 조직 표본을 제작하고 CCD 카메라 (Polaroid DMC2 digital Microscope Camera (Polaroid Corporation, Cambridge, MA 02139, USA))가 부착되어 있는 광학 현미경 (Olympus BX, Tokyo, Japan)을 이용하여 두 가지 배율 (12.5배, 40배)로 조직학적 소견을 관찰하였다. 신생 골부위와 남은 골이식재 부위의 넓이를 측정하여 타이타늄 메쉬 내부 공간에서 차지하는 면적의 비율(%)을 구하였다. 그 수치들을 Mann-Whitney U-test와 Wilcoxon signed rank-test를 이용하여 통계 분석하였다 ($\alpha$ = .05). 결과: 대조군과 $\beta$-TCP/HA를 이식한 나머지 세 군의 신생골 형성을 비교하면 통계적으로 유의하게 $\beta$-TCP/HA를 이식한 군에서 신생골 형성이 더 많았다 (P = .003). 서로 다른 particle size 간 비교에서는 신생골 형성에 있어서 통계적으로 유의한 차이는 없었다. 하지만 형성된 수직골 총량 (신생골과 이식골의 면적의 합)을 각 그룹 간에 비교해 보면 대조군보다 $\beta$-TCP/HA를 이식한 군이 통계적으로 더 많은 비율을 나타내었고 (P = .001), 특히 $\beta$-TCP/HA 이식 군간 비교에서는 medium size 군이 large particle size 군보다 통계적으로 더 큰 면적을 나타내었다 (P = .039). 그러나 large particle size 군과 small particle size 군 사이 그리고 medium size 군과 small particle size 군 사이에는 통계적으로 유의한 차이를 보이지 않았다 (P> .05). 결론: 티타늄 메쉬를 이용한 수직골 증대술에서 $\beta$-TCP/HA 합성골을 사용하는 경우 수직골 형성에 기여하며 특히 medium size (0.5 - 1.0 mm)의 $\beta$-TCP/HA 이식재가 large size 이식재 보다 더 우수한 수직골 형성의 결과를 보였다.