• 한국안전학회지
• /
• 제20권4호
• /
• pp.71-77
• /
• 2005

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as foundation, erection, structure, equipment finish and etc based on accident examples and investigation on actual condition in building. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.259-276
• /
• 1999

An analytical solution for the shape functions of a beam segment supported on a generalized two-parameter elastic foundation is derived. The solution is general, and is not restricted to a particular range of magnitudes of the foundation parameters. The exact shape functions can be utilized to derive exact analytic expressions for the coefficients of the element stiffness matrix, work equivalent nodal forces for arbitrary transverse loads and coefficients of the consistent mass and geometrical stiffness matrices. As illustration, each distinct coefficient of the element stiffness matrix is compared with its conventional counterpart for a beam segment supported by no foundation at all for the entire range of foundation parameters.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제12권4호
• /
• pp.301-307
• /
• 2008

The John Templeton Foundation (JFT) is a large private philanthropic institution with an interest in, among other areas, the development of human genius. This report chronicles the start of a portfolio in gifted education, designed to address this aspect of the Foundation's work.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.72-78
• /
• 2008

In any form of construction work, it is essential that accidents be prevented at every stage from foundation preparation to build completion. For this, it is necessary to use models that can assess risk and provide instruction for safe work processes so that the risk of accidents is reduced. Currently, however, very few models can perform these tasks. In this paper, we presents a model that assesses risk quantitatively by analyzing risk factors involved in stage of construction such as foundation work, erection work, structural work, equipment work, finishing work and etc work. The model performs assessment based on examples of accidents and by investing actual conditions during construction. In addition, we presents in this paper a safety management system was developed to assess risk during construction and to effectively train laborers.

• 한국안전학회지
• /
• 제24권6호
• /
• pp.124-131
• /
• 2009

In any form of construction work, it is essential that accidents be prevented at every stage, from foundation preparation to build completion. For this, it is necessary to use models that can assess risk and provide instructions for safe work processes so that the risk of accidents is reduced. Currently, however, very few models can perform these tasks. In this paper, we present a model that assesses risk quantitatively by analyzing the risk factors involved in each stage of construction, such as foundation work, temporary work, structural work, equipment work, and finishing work. The model performs assessment based on examples of accidents and by investigating actual conditions during construction. In addition, we present in this paper a safety management system developed to assess risk during construction and to effectively train laborers.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.610-613
• /
• 2009

Uldolmok tidal current power plant was constructed on May 2009 at Jindo Gun in Korea. However it had much trouble in installing structure due to the extremely fast tidal current velocity(max. 5.5m/sec) and the jacket type plant structure. Therefore in this paper, The characteristics of tidal current and sea bed topography at Uldolmok tidal current plant site are investigated, and the detailed foundation work process of the plant is described.

• 한국건설관리학회논문집
• /
• 제6권4호
• /
• pp.152-163
• /
• 2005

깊은기초 시공시에 기초파일의 항타작업은 인접구조물 등에 진동을 야기하고 소음으로 인해 주변지역에 민원을 발생시키고있다. 이러한 문제로 진동 $\cdot$ 소음 문제를 직접 야기시키는 직타공법 보다는 주로 저소음 $\cdot$ 저진동 공법 인 천공 후 타격공법을 적용하는 사례가 증가하고 있다. 그러나 천공 후 타격공법도 일정거리 이내에서 시공을 할 경우 진동 $\cdot$소음을 유발시컥 민원으로 인한 공기지연을 초래하고 있는 실정이다. 따라서 본 연구에서는 건설 구조물의 구축을 위한 기초공사현장에서 말뚝공사를 할 때 발생하는 진동 $\cdot$ 소음을 천공 후 타격공법을 대상으로 지반조건이 상이한 7개의 현장에서 실측하여 이를 제정된 허용규제기준에 따른 적정 이격허용거리를 회귀분석 식으로 제시하고 있다. 이러한 연구 결과는 기초파일 공사시에 요구되는 적정 거리확보를 위한 기준역할을 하도록 하며, 인접 구조물이나 주민의 환경적 피해를 최소화하고, 나아가 공기지연으로 발생되는 클레임을 방지하는데 활용성을 갖도록 함에 연구의 목적이 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.184.2-184.2
• /
• 2010

With growing of wind turbine industry, offshore wind turbine system is getting more attention in recent years. Foundation of the offshore wind turbine plays a key role in stability of whole system. In this work, 5MW NREL reference wind turbine with rated speed of 11.4m/s is used for load calculation. Wind loads and wave loads are evaluated using GH-Bladed (Garard Hassan) and FAST (NREL). Additionally, FE simulation is carried out to investigate the wave effect on the support structure. Meanwhile, this work is trying to systematize and optimize load cases simulation for foundation of wind turbine system.

• 신재생에너지
• /
• 제6권3호
• /
• pp.39-46
• /
• 2010

With growing of wind turbine industry, offshore wind energy is getting more attention in recent years. Among all the components of offshore wind turbines, the foundation of the offshore wind turbine plays a key role in stability of whole system. In this work, the 5 MW NREL reference wind turbine with rated speed of 11.4 m/s is used for load calculation. Wind and wave loads are calculated using GH-Bladed (Garard Hassan) and FAST (NREL). Additionally, FE simulation is carried out to investigate the wave effect on the support structure. Meanwhile, this work is to simulate systemic and optimized load cases for the foundation analysis of wind turbine system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1050-1055
• /
• 2007

In the case of a rail road bridge extension work, especially single track to double track, the foundation of new substructure which supports the extended part of superstructure could be interfered by the exist foundation of an old bridge. When these two foundations are jointed to prevent such fatal effects of the structure as unequal subsidence of soil foundations, it is important to prove the structural behaviour of the joining surfaces between new foundation and old foundation. 3-Dimensional Finite Element Analysis Method have been studied for the solutions of the structural behaviour of the foundations. In this analysis, 'Contact Element' which allows the sliding of each adjoining member is used for the joint of the boundary surface of the old and new pier foundations. Furthermore, Material Nonlinear Behaviour Analysis also supports the accuracy of the result in this study because the foundations consist of concrete main bodies and reinforced steel bars. These detailed analyses secure the verification of the structural safety of the foundations in the extension work more firmly.