• 생물환경조절학회지
• /
• 제17권3호
• /
• pp.197-203
• /
• 2008

본 연구는 1-2W형 온실의 구조를 개조하여 착색단 고추 재배온실로 이용하고 있는 온실의 구조의 안정성을 검토하였다. SAP-2000에 의한 구조해석 결과 1-2W기본형 온실의 기둥을 1.2m높였을 경우, 구조물이 견딜 수 있는 한계적설심은 변화는 거의 없으나 한계풍속은 약 $26.0\sim41.0m/s$정도로서 기본형에 비하여 약 $3\sim18%$ 정도 감소하는 것으로 나타났다. 풍하중 작용시 변형도를 비롯하여 축방향력, 전단력, 휨모멘트 등의 최대단면력은 기본형이나 개조형에 관계없이 거의 유사한 경향으로 나타났으며, 최대단면력은 풍상측의 처마높이 부위에서 발생하는 것으로 나타났다. 설하중 작용시 변형도를 비롯하여 축방향력, 전단력, 휨모멘트 등의 최대단면력은 기본형이나 개조형에 관계없이 거의 유사한 경향으로 나타났으며, 축방향력을 제외한 최대단면력은 처마높이 부위에서 발생하였으며, 최대축방향력은 내측기둥에서 발생하였다. 한계적설심에 대한 내측기둥의 좌굴은 모두 안전한 것으로 나타났으며 세장비 또한 제한값 범위내에 들어 기본형 및 개조형 모두 만족하였다. 기초의 인발저항력과 지내력은 기본형과 개조형에 관계없이 모두 안전한 것으로 나타났다.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.111-117
• /
• 2000

In this study, the bearing capacity behavior of strip footing located above a continuous cavity in sand was investigated experimentally. The model footing test was performed in a model box made by using raining method in sand. The model footing test results were compared with those obtained from theoretically proposed equations. The results of the analysis indicate that there is a critical region under the footing. For strip footing, there exists a critical depth below which the presence of the cavity has negligible influence on the footing performance. Only when the cavity is located within this region will the footing performance be significantly affected by the presence of the cavity. The size of the critical region depends on several factors such as footing shape, soil property, cavity size and cavity shape. When the cavity is located within the critical region, the bearing capacity of the footing varies with various factors, such as the size and location of the cavity and the depth of foundation. Based on the experimental study, the following conclusions were induced. 1. The ultimate bearing capacity due to the eccentricity of a underground cavity increases at the rate of the small rather than that due to the depth of a underground cavity. This indicates that the bearing capacity of a strip footing is influenced on the depth rather than the eccentricity of a underground cavity. 2. The critical $depth(D/B)_{cr}$, by underground cavity in sand soil ground that is made by the relative density($D_r$)=55%, 65%, 75%, approaches a range of about 8~10 in case of W/B=1, and about 11~13 in case of W/B=2. 3. In case of the relative density($D_r$) 75%, the most outstanding differential settlement trend is shown in the depth of 4~8cm regardless of the size of cavity, namely, when the value of D/B is 1~2. Therefore, a underground cavity influences on not only the decrease of the bearing capacity but also the differential settlement of a strip footing.

• 생물환경조절학회지
• /
• 제26권3호
• /
• pp.215-220
• /
• 2017

접수 및 대목 줄기의 회전 절단으로 인한 접목 불량 발생 가능성에 대한 문제점을 해결하기 위하여 수학적 분석 및 고속카메라를 이용하여 실측한 결과 칼날 회전반경 50mm이고 줄기직경이 5mm 일 때, 깊이는 0.11mm인 것으로 계산되어 줄기부 곡면 절단에 따른 문제는 없을 것으로 사료된다. 또한 접목시스템에서 모종 줄기를 잡는 그립퍼의 최적 형상 설계를 위하여 실시한 모종 줄기 압축시험 결과 대목의 경우 0.8mm 이상, 접수의 경우 0.6mm 이상의 범위에서 줄기부를 압축 할 경우 이전 형상으로 완전히 복원되지 않는 것으로 조사되어 그립퍼 형상 설계 시 그럼퍼 간격 결정에서 고려해야 할 것으로 사료된다. 또한 접목시기인 토마토 모종의 경우 줄기의 휨이 평균 10도 전후 인 것으로 조사되어 접목불량이 발생할 가능성이 있으므로 이를 개선하기 위한 추가 연구가 필요할 것으로 사료된다. 최적핑거 형상 시험에서는 모서리핑거 형상이 핑거간 거리 조정을 통해 정확한 중앙점을 잡을 수 있는 것으로 조사되었다. 핑거간 거리는 접수와 대목에 대해 각각 2.5mm와 3.0mm로 설정하고 신축성 있는 재질을 이용하여 1mm 두께로 코팅을 하면 대부분의 모종 줄기를 상처없이 파지 할 수 있을 것으로 조사되었다.

• 대한한의학원전학회지
• /
• 제21권2호
• /
• pp.1-20
• /
• 2008

The Song Dynasty(宋代) period gained the summit in the developmental phase of the history in pediatrics. In 1076, Taeuiguk(太醫局) was founded and Sobangmaek(小方脈) was the one of nine branch in Taeuiguk(太醫局). As a result, educational agency and system was arranged in the field of pediatrics. At the same time, pediatrics have furnished with foundation to develop independent field in medical science. Especially, Byeonjeungnonchi(辦證論治) system is established in pediatrics science according to the compilation of "Soayakjeungjikgyeol(小兒藥證直訣)" by Jeoneul(錢乙). Children's doctors, Jeoneul(錢乙), Jinmunjung(陳文中) and Donggeup(董汲) arranged clinically theories, so they made that age the peak of the pediatrics. Looking at the developmental part of theory in pediatrics of the Song Dynasty period, Jeoneul(錢乙), who was the representative children's doctor in Song Dynasty period, insisted that children had formed Ojang-yukbu(五臟六腑) in the physiological part but they were not perfect like adult's. Therefore they had to consider the poor part in children's body, and then they had to cure them. 'Byeonjeung(變蒸)' was considered to be normal physiological phenomenon. Also he insisted that Yukeum(六淫), 'Pung, Han, Seo, Seup, Jo, Hwa(風, 寒, 暑, 濕, 燥, 火)' and 'Gyeong, Pung, Gon, Cheon, Heo(驚, 風, 困, 喘, 虛)' are the main cause of the children's five vital organ's pathology Like this, his academic thought, which lay emphasized on children's spleen and stomach and Ojangbyeonjeung(五臟辦證) main principles, affected on doctors, Donggeup(董汲), Yeomhyochung(閣孝忠), Yubang(劉肪), Jang-wonso(張元素), Idong-won(李東垣), Manjeon(萬全). Bangje(方劑) fields of pediatrics had developed so fast and "Taepyeongsunghyebang(太平聖惠方)" contained about 2689 kinds of children's prescription. According to this, there are so many kinds of medicinal shape, for example 'Hwan, San, Go, Dan(丸, 散, 膏, 丹)', which cured children' s disease. Through this, we find that the shape of medicine about the children's diseases had developed to the more simple direction, taking account of the children's clinical trait.

• 한국버섯학회지
• /
• 제10권4호
• /
• pp.151-159
• /
• 2012

The button mushroom (Agaricus bisporus) is one of the most widely cultivated important edible mushroom species. In the breeding of new button mushroom, 'Seolgang' was developed by crossing two monokaryons 'CM020913-27' and 'SSU423-31'. Because of the secondarily homothallism, only a small percentage of the basidia produce 3 or 4 spores, which are mostly haploid (n) and do not fruit. Single spore cultures derived from these types of spores produce a vegetative mycelium that also contain a variable number of genetically identical nuclei per cell called monokaryon. The lack of clamp connections between monokaryon and dikaryon required a series of mycelial culture and fruiting test. After crossing, hybrids were cultivated on a small scale and on a commercial scale at a farm. For this, the spawn was made by a commercial spawn producer and the spawned compost by a commercial compost producer. Mycelial growth of 'Seolgang' on CDA was better at $20^{\circ}C$ and $25^{\circ}C$ when it was compared with that of '505 Ho'. The mature cap shape of new strain 'Seolgang' is oblate spheroid and the immature cap shape is round to oblate spheroid. The cap diameter was 41.2 mm on average. In comparison with white strain '505 Ho', the strain had a yield that was 9% higher. It produced fruiting bodies which had a higher weight on average per fruiting body and were 19% firmer with a good shelf life. Days of fruiting body were 3-4 days later than those of '505 Ho'. The physical characteristics such as elasticity, chewiness, adhesiveness were better than that of '505 Ho'. Genetic analysis of the new strain 'Seolgang' showed different profiles compared to '505 Ho', CM02913-27, SSU413-31, when RAPD primers A02 and O04 were used.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.503-517
• /
• 2016

Objective: The aim of this study was to evaluate the effectiveness of 3 dimensional contoured pillow through analyzing contact pressure and to suggest its design guidelines through analyzing the posture of head and neck area. Background: The quality of sleep is a very important factor closely related with human's health. To improve the quality of sleep, the verification of design factors affecting the posture of the head and neck is needed, and a pillow design that can induce proper posture is required. Method: This study measured the contact pressures of the two reference groups (bead and cotton pillows) as a method to evaluate the design effectiveness of the contoured pillow. This study proposed 3-dimensional design guidelines by drawing anthropometry (head length) affecting cervical curvature angle (CCA) through the measurement of the participants' cervical curvature angles. Results: In the design effectiveness evaluation, the contact pressure of cervical region was higher than that of a reference group (cotton pillow), and contract area increased, and contract pressure decreased in the shape distributing the occipital region's body pressure. This study proposed pillow's cervical supporting height by percentile of a head length [head length (%tile) (cervical supporting height) affecting the posture of the head and neck: 14.6cm (5%tile) (6.2cm), 15.5cm (25%tile) (6.7cm), 16.4cm (50%tile) (7.1cm), and 19.3cm (75%tile) (8.9cm)]. Conclusion: This study confirmed the contoured pillow's design effectiveness maintaining cervical angle comfortable to sleep with the shape supporting the cervical vertebrae and by reducing the contact load of the occipital region. Also, this study proposed pillow design guidelines based on the 3-dimensional contoured pillow design effectiveness, through which the study laid the foundation for pillow design in a systematic method. Application: The results of this study are expected to be utilized as the basis data by which the optimum pillow type and pillow design according to main percentile can be standardized.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.542-547
• /
• 2021

글라스 라이닝 임펠러는 강산을 포함한 대부분의 화학물질들에 대해 내부식성이 있고, 또한 평활하고 눌어붙지 않는 표면을 가지며 세정이 용이하고 프로세스에 불순물들을 유입하지 않는 강점을 갖고 있다. 글라스 라이닝 HOMEBASE 임펠러는 저점도 유체에서 고점도 유체까지 폭넓은 점도 범위의 액체를 교반할 수 있도록 개발된 다목적형 대형 교반 임펠러이나, 그중에서도 세포 배양이나 효모의 배양, 맥주 발효 솥 등은 저점도 액의 통기 교반에 많이 사용하며, 특히 공기-수계의 통기성 교반에 많이 적용한다. 구조가 간단하면서도 성능 면에서 경쟁력을 갖는 HOMEBASE 임펠러에 대한 글라스 라이닝은 제작상 임펠러와 샤프트의 접합 면적을 가능한 한 작게 할 수 있도록 상하 분할이 필수적이다. 임펠러의 상하 분할은 혼합 성능에는 거의 영향을 미치지 않지만, 통기 성능을 저하하였다. 본 연구에서는 Glass Lined HOMEBASE 임펠러 형상의 최적화를 위해, 상·하부로 분할된 임펠러 사이의 장착각도차와 임펠러 사이의 간격 및 방해판의 개수가 통기 동력에 미치는 영향에 관한 연구를 수행하였다. 상·하부로 분할된 임펠러 사이의 장착각도차와 간격이 통기를 할 때의 동력 P_g와 통기가 없을 때의 동력 P₀의 비인 P_g/P₀를 저하시킨다는 연구 결과를 통해 Glass Lined HOMEBASE 임펠러 최적 형상과 방해판 조건을 도출하였다.

• 한국지진공학회논문집
• /
• 제10권4호
• /
• pp.15-24
• /
• 2006

본 연구는 각종 매설관의 경계조건에 따른 동적 거동에 대한 연구이다. 축방향 및 축직각방향에 대한 거동을 조사하였다. 매설관은 탄성기초 위에 놓인 보요소로 모형화하였고, 지진파는 정현파 형태의 지반 변위로 적용하였다. 매설관의 고유진동수와 모드 형태 그리고 매개변수의 영향을 조사하기 위해 자유 진동에 대한 해석을 수행했다. 그리고 지반진동에 대한 거동을 조사하기 위해 자유진동 해석을 통해 얻어진 고유진동수와 모드 형태를 이용하여 강제 진동에 대한수식을 유도하였다. 자유 진동시 매설관의 고유진동수에 가장 큰 영향을 미치는 것은 지반 강성과 매설관의 길이였다. 지반진동의 전파방향과 전파속도 그리고 진동수에 대한 콘크리트관, 강관, FRP관의 동적거동을 연구하였고 그 결과를 비교하였으며 다양한 단부경계조건에 대한 동적거동해석을 통해 매설관의 종류와 단부경계조건에 따른 최대 변형률 발생지점을 산정하였다.

• 가정과삶의질연구
• /
• 제23권4호
• /
• pp.1-15
• /
• 2005

Korean society is experiencing rapid changes which are certain to shape the lives of the older people and their families. So, the purpose of this study was to improve the quality of the elderly welfare service in Korea. Even though the interest about the elderly welfare in Korea is rapidly on the increase, the reality of Korean Society still leaves much to be desired, quantitatively as well as qualitatively. Pay attent to this point, now going to grasp the situation of not the handicapped elder people but the general elder people actual life condition and demand for welfare. So this study focused on the demand of not out-of home service but in-home care service. It was based on the data from by Korea National Statistical Office, having observed 6,139 elderly people. The results were as follows. They hope to get the elderly welfare services about health examination service, nursing survice, supporting service for household. That was, the most of them wanted in-home care service than out-of home care service. To ensure effective care to the elderly, it needed development and settlement of welfare service in face of their daily living. And, even though they recognized that they should cover the elderly life expenses themselves, the rate was hit that indicated their adult children as a parents supporter. This means that we should consider not only to the elder people but also to the family which contained the old people as the elderly welfare service. As a remedy, we can find the cooperation between elder welfare service at the social welfare organization and counsel, education at the family strengthen center. To improve the quality of the elderly welfare service in Korea, the elderly welfare service should focus not only on the physical and spiritual health maintenance but also active understanding living environment and growing ability to arbitrate between individual and living.

• 건축역사연구
• /
• 제12권3호
• /
• pp.19-38
• /
• 2003

The purpose of this study is to analyze the architectural character of the upper risen architecture(高床式 建築) in Japan. There are few upper risen architecture and architectural remains in Korea. Until now most of Korean researcher recognized that the upper risen architecture is southern regions' form. But there are a few numbers of upper risen buildings in northern regions of Korea and China. Therefore we need to compare northern and southern regions' upper risen architecture. The scope of this study is architectural remains, sites and present buildings about upper risen architecture in Japan. The period of this study is from third to eighth century. The method of this study is the analyses of site plan(the ratio of front and side length) and construction about Japanese Architecture. And then this study compare Japanese with other countries in Korean and Chinese upper risen architecture. Results of the study are below. 1. In Japan, upper risen architecture was introduced into southern regions(southern China and southeast Asia) with rice farming culture. 2. After introduced upper risen architecture, they were influenced many architectural technique of Korean and Chinese. 3. There were many technical improvement(such as foundation stone standing method, high technical wooden frame structure and adaptable triangle frame wall at moisture) the Japanese upper risen architecture in Nara Period(奈良時代). 4. As the results, I found out that there were many similarity Korea and Japan in upper risen architecture. I think that we will try continuous to study another regions' upper risen architecture in order to define conclusion.