• 제목/요약/키워드: Forward-Link

검색결과 285건 처리시간 0.03초

다중경로 감쇄 채널에서의 광대역 부호분할다중접속방식 시스템의 주파수 및 보호 동기 오차에 따른 성능 분석 (Performance Analysis of Wideband CDMA System with Feq./Timing Error in Muliti-path Fading Channel)

  • 최영관;안철용;김동우
    • 한국통신학회논문지
    • /
    • 제25권6A호
    • /
    • pp.773-781
    • /
    • 2000
  • 이 논문에서는 광대역 부호분할다중접속방식 시스템의 순방향 연결의 다중경로 레일레이 감쇄 채널에서 주파수 및 부호 동기 오차에 따른 오류확률을 구하였다. 채널 오류확률은 이론적으로 구하고, 정보 오류확률은 모의실험으로 확인하였다. 부호 및 주파수 동기 오차에 따른 성능 떨어짐을 길쌈부호와 터보부호 두 부호화 구조에 따라 연구하였다. 결과에 따르면, 두 부호화 방식은 비슷한 성능 떨어짐을 겪는다. Tc/4의 부호 동기 오차에서 1dB성능이 떨어지고, 50 Hz의 주파수 동기 오차에서는 0.5dB 성능이 떨어진다.

  • PDF

입력 피드포워드와 퍼지 PI제어기를 갖는 3상 ZSI의 과도상태 개선 (Transient State Improvement of Three-Phase ZSI with the Input Feedforward and Fuzzy PI Controller)

  • 오연준;정영국;임영철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 전력전자학술대회 논문집
    • /
    • pp.359-360
    • /
    • 2012
  • This paper proposes a scheme of auto-tuning fuzzy PI controller and input voltage feed forward to control the output voltage of a three-phase Z-source inverter (ZSI). The proposed scheme adjusts the ts (Kp and Ki) in real time in order to find the most suitable Kp and Ki for PI controller and to simplify the controller design. The proposed scheme is verified the validity by experiment and co-simulation in PSIM and MATLAB/SIMULINK both load step change and input DC voltage variation in Z-source inverter, and has compared with the conventional PID control scheme. The experiment results involve of three-phase output voltage, Z-network capacitor voltage and dc-link peak voltage value. By those analysis and comparison, the availability of the proposed method in output voltage transient response quality improving has been verified. Compared with conventional PID method, the proposed method showed a more effective and robust control performance for coping with the severe disturbance conditions.

  • PDF

Exploiting Optimal Throughput of Adaptive Relaying Based Wireless Powered Systems under Impacts of Co-channel Interference

  • Nguyen, Thanh-Luan;Do, Dinh-Thuan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권5호
    • /
    • pp.2009-2028
    • /
    • 2018
  • Considering a dual-hop energy-harvesting (EH) relaying system, this paper advocates novel relaying protocols based on adaptive time power switching-based relaying (AR) architecture for amplify-and-forward (AF) mode. We introduce novel system model relaying network with impacts of co-channel interference (CCI) and derive analytical expressions for the average harvested energy, outage probability, and the optimal throughput of the information transmission link, taking into account the effect of CCI from neighbor cellular users. In particular, we consider such neighbor users procedure CCI both on the relay and destination nodes. Theoretical results show that, in comparison with the conventional solutions, the proposed model can achieve optimal throughput efficiency for sufficiently small threshold SNR with condition of reasonable controlling time switching fractions and power splitting fractions in concerned AR protocol. We also explore impacts of transmission distances in each hop, transmission rate, the other key parameters of AR to throughput performance for different channel models. Simulation results are presented to corroborate the proposed methodology.

FARS: A Fairness-aware Routing Strategy for Mobile Opportunistic Networks

  • Ma, Huahong;Wu, Honghai;Zheng, Guoqiang;Ji, Baofeng;Li, Jishun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권5호
    • /
    • pp.1992-2008
    • /
    • 2018
  • Mobile opportunistic network is a kind of ad hoc networks, which implements the multi-hop routing communication with the help of contact opportunity brought about by the mobility of the nodes. It always uses opportunistic data transmission mode based on store-carry-forward to solve intermittent connect problem of link. Although many routing schemes have been proposed, most of them adopt the greedy transmission mode to pursue a higher delivery efficient, which result in unfairness extremely among nodes. While, this issue has not been paid enough attention up to now. In this paper, we analyzed the main factors that reflect fairness among nodes, modeled routing selection as a multiple attribute decision making problem, and proposed our Fairness-aware Routing Strategy, named FARS. To evaluate the performance of our FARS, extensive simulations and analysis have been done based on a real-life dataset and a synthetic dataset, respectively. The results show that, compared with other existing protocols, our FARS can greatly improve the fairness of the nodes when ensuring the overall delivery performance of the network.

계통연계 인버터를 위한 새로운 고조파 보상법 (A Novel Harmonic Compensation Technique for the Grid-Connected Inverters)

  • Ashraf, Muhammad Noman;Khan, Reyyan Ahmad;Choi, Woojin
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2019년도 전력전자학술대회
    • /
    • pp.71-73
    • /
    • 2019
  • The output current of the Grid Connected Inverter (GCI) can be polluted with harmonics mainly due to i) dead time in switches, ii) non-linearity of switches, iii) grid harmonics, and iv) DC link fluctuation. Therefore, it is essential to design the robust Harmonic Compensation (HC) technique for the improvement of output current quality and fulfill the IEEE 1547 Total harmonics Distortion (THD) limit i.e. <5%. The conventional harmonic techniques often are complex in implementation due to their i) additional hardware needs, ii) complex structure, iii) difficulty in tuning of parameters, iv) current controller compatibility issues, and v) higher computational burden. In this paper, to eliminate the harmonics from the GCI output current, a novel Digital Lock-In Amplifier (DLA) based harmonic detection is proposed. The advantage of DLA is that it extracts the harmonic information accurately, which is further compensated by means of PI controller in feed forward manner. Moreover, the proposed HC method does not require additional hardware and it works with any current controller reference frame. To show the effectiveness of the proposed HC method a 5kW GCI prototype built in laboratory. The output current THD is achieved less than 5% even with 10% load, which is verified by simulation and experiment.

  • PDF

Physical Layer Security of AF Relay Systems With Jamming.

  • Ofori-Amanfo, Kwadwo Boateng;Lee, Kyoung-Jae
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2019년도 춘계학술대회
    • /
    • pp.288-289
    • /
    • 2019
  • This paper studies the secrecy capacity for a wireless cooperative network with perfect channel state information at the relays, and receiver. A similar assumption is also made for the instance where there exist a direct link between the transmitter and receiver. Physical Layer security techniques are employed in wireless networks to mitigate against the activity of eavesdroppers. It offers a viable alternative to computationally intensive encryption. In this paper the design of a protocol utilizing jamming (via jamming nodes) for better security and relaying (via relay nodes) for the amplify-and-forward (AF) operation, is investigated. A a signal-to-noise variant of secrecy known as secrecy gap is explored because of its use of lesser computational power - preferable for practical systems. Thus we maximize this signal-to-noise approach instead of the conventional secrecy capacity maximization method. With this, an iterative algorithm using geometric programming (GP) and semi-definite programming (SDP) is presented with appreciable benefits. The results show here highlight the benefits of using fractional components of the powers of the relays to offer better secrecy capacity.

  • PDF

무선센서네크워크에서 효율적인 에너지 절약 전송 기법 (A Efficient Energy-Saving Forwarding Technique in Wireless Sensor Networks)

  • ;;손민한;추현승
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2011년도 춘계학술발표대회
    • /
    • pp.158-159
    • /
    • 2011
  • Energy efficiency in wireless sensor networks (WSNs) is one significant factor that needs to be considered when making any designs or doing any enhancements on the communication protocol stack. In WSNs using traditional geographic routing, when a sensor node receives a data packet that needs to be transmitted to the sink, it will forward the packet to the neighbor node which is closest to the sink. The traditional geographic routing assumes that the link quality is always 100%. This may cause a bad result as per which we waste too many energy for retransmissions between the two nodes. Thus, the problem here is how to select such node as forwarder at most efficiently in the aspect of both energy consumption and the distance toward the destination. The better node we choose, the more energy we can conserve for the whole network. In this paper, we propose a next-hop forwarding selection metric, called Energy Consumption for Transmission (ECT), which can resolve the above problem in the best way.

Channel Transfer Function estimation based on Delay and Doppler Profiler for 5G System Receiver targeting 500km/h linear motor car

  • Suguru Kuniyoshi;Shiho Oshiro;Gennan Hayashi;Tomohisa Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권5호
    • /
    • pp.121-127
    • /
    • 2023
  • A 500 km/h linear motor high speed terrestrial transportation service is planned to launch 2027 in Japan. In order to support 5G service in the train, the Sub-carrier spacing frequency of 30 kHz is planned to be used instead of common 15 kHz sub-carrier spacing to mitigate Doppler effect in such high-speed transportation. In addition, to increase the cell size of 5G mobile system, plural Base Station antenna will transmit the identical Down Link (DL) signal to form the expanded cell size along the train rail. In this situation, forward and backward antenna signals will be Doppler shifted by reverse direction respectively and the receiver in the train might suffer to estimate accurate Channel Transfer Function (CTF) for its demodulation. In this paper, Delay and Doppler Profiler (DDP) based Channel Estimator is proposed and it is successfully implemented in signal processing simulation system. Then the simulated performances are compared with the conventional Time domain linear interpolated estimator. According to the simulation results, QPSK modulation can be used even under severe channel condition such as 500 km/h, 2 path reverse Doppler Shift condition, although QPSK modulation can be used less than 200 km/h with conventional Channel estimator.

IS-95B 순방향 채널에서의 멀티코드 CDMA 시스템의 성능분석 (Performance Analysis of Multi-Code CDMA System over IS-95B Forward Channel)

  • 곽재민;최창호;이영교;오창헌;김언곤;조성준
    • 한국통신학회논문지
    • /
    • 제25권5B호
    • /
    • pp.879-888
    • /
    • 2000
  • 본 논문에서는 데이터 서비스를 위해 멀티코드 방식을 채택한 IS-95 CDMA 시스템의 순방향 링크 성능를 이론분석과 시뮬레이션을 통해 얻어낸다. AWGN, 다중사용자간섭, 다중경로간섭, 그리고 다중경로 페이딩이 존재하는 채널을 고려하였으며, 다중경로 채널은 TDL(Tapped Delay Line) 모델을 적용하였다. 실제적인 성능분석을 위해 왈쉬코드와 M계열 PN 코드가 연접된 IS-95B CDMA 시스템의 성능을 분석하였다. 음성 활성화율, 음성/데이터 사용자의 요구 SNR, 멀티코드 수, 음성/데이터 사용자 수 등을 파라미터로 하여 Qos를 만족시키는 음성/데이터 서비스에 대한 BER 성능을 구하고 음성 사용자에 대한 최대 용량을 정량적으로 분석하였다. 결과에 의하면, IS-95B 순방향 시스템에서 음성 사용자의 최대 용량이 38명일 때 데이터 사용자가 1명인 경우와 4명인 경우에 멀티코드 수를 하나씩 감소시킴에 따라 음성 사용자의 용량은 각각 5.5%, 22.3%씩 증가하였다. 따라서, 채널 환경과 트래픽 특성에 따라 데이터 사용자에게 할당되는 멀티코드 수와 요구 QoS를 제어함으로써 IS-95B CDMA 시스템에서 수용할 수 있는 최대 사용자 수를 증대시킬 수 있다.

  • PDF

WDM 다중홉 망에서 ATM 응용을 위한 노드 구조 및 셀 라우팅 기법 (Node Architecture and Cell Routing Strategies for ATM Applications in WDM Multihop Networks)

  • 이호숙;이청훈;소원호;권혁중;김영천
    • 전자공학회논문지S
    • /
    • 제35S권11호
    • /
    • pp.44-52
    • /
    • 1998
  • 본 논문에서는 WDM 다중홉 망에서 효율적인 ATM 응용 서비스를 제공하기 위한 노드 구조 및 셀 라우팅 기법을 제시하였다. 제안된 WDM 노드의 파장 교환 구조는 MSN 구조의 논리적 토폴로지를 기반으로 하고, 내부에 광 지연루프를 사용하여 전 ${\cdot}$ 광 신호의 변환없이 셀의 지연을 허용하므로써 Store-and-forward(S&F)와 편향 라우팅의 장점을 취할 수 있다. 제안된 라우팅 기법은 ATM 셀 전송의 우선 순위에 따라 각기 다른 버퍼 점유, 재지연, 편향 기법을 적용하여 서비스 계층별 QoS를 보장하면서 효율적인 경합 해결 및 경로 제어가 가능하도록 하였다. 라우팅 방식-Ⅰ에서는 경함이 발생할 경우 고순위 셀은 S&F 방식으로 라우팅하고 저순위셀은 편향시켜 고순위 셀의 전송지연을 줄이고 처리율을 향상시켰다. 방식-Ⅱ는 망의 트래픽 부하가 적을 경우 저순위 셀도 부분적인 버퍼 점유를 허락하여 저순위 셀의 폐기율을 줄이므로써 망의 이용률을 높일 수 있도록 하였다. 제안한 라우팅 기법들의 성능 평가를 위해 시뮬레이터를 작성하여 균형 및 불균형 트래픽 상황에서 평균 홉수와 처리율 측면에서 성능을 비교 분석하였다.

  • PDF