• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.199-208
• /
• 2014

Code division multiple access (CDMA) is one of the promising medium access control (MAC) schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. As a way of performance evaluation, sea or lake experiment has been employed along with computer simulation.. In this study, we design the underwater CDMA forward-link transceiver and evaluate the feasibility aginst harsh underwater acoustic channel in water-tank first. Then, based on the water-tank experiment results, we improved the transceiver and showed the improvements in a lake experiment. A pseudo random noise code acquisition process is added for phase error correction before decoding the user data by means of a Walsh code in the receiver. Interleaving and convolutional channel coding scheme are also used for performance improvement. Experimental results show that the multiplexed data is recovered by means of demultiplexing at receivers with error-free in case of two users while with less than 15% bit error rate in case of three and four users.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.122-127
• /
• 2017

The data link layer operates reliable internode communication in the OSI reference model. Generally, the forward error correction (FEC) method is used in the data link layer of the wireless sensor network (WSN) environment that has a high frequency of errors. However, the FEC method consumes a significant amount of energy due to its high error correction rate, which negatively affects the networks' lifespan. In contrast with battery-based technology, energy is regularly recharged in the solar-powered WSN to meet higher energy needs than required for basic operation of existing nodes. By efficiently utilizing this surplus energy, the proposed energy-aware FEC method can reduce the data loss rate with no decrement of the network lifetime. The method employs a trade-off relationship between the energy and data loss rate by adjusting the parity length in the FEC method to the energy state in each node. The performance of the proposed scheme was verified through a simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1265-1275
• /
• 1999

An adaptive MMSE detector can be used to cancel the MAI in CDMA system. But standard adaptive MMSE detector cannot be used in real mobile environment due to fast fading channel. Furthermore multipath reception make it more difficult to converge to optimum weight values. In this paper we discuss and model the multipath fading environment in Forward-link Synchronous CDMA channels and propose adaptive MMSE RAKE detector structure which can be applied in the mobile station. A proposed adaptive MMSE detector requires estimation of received signal delay and complex channel coefficients such as amplitude and phase variation. These burden can be solved by utilizing the common pilot channel. The pilot channel may have higher power than the traffic channel, which give more exact channel estimation. Moreover RAKE structure gives more accurate and stable result which can be used as reliable reference signal in multipath fading channel environment. With this structure, conventional adaptive algorithm such as LMS or NLMS can be applied in adaptive MMSE detector.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.479-486
• /
• 1999

In this paper the system performance degradation resulting from nonlinear transmitter power amplifier which is essential to increase the efficiency is analyzed in a forward link CDMA system. The power amplifier is modeled by power series model which includes only odd-order terms. The effects of power amplifier's nonlinearity such as intersymbol interference, phase distortion on the RF system performance were visualized by examining the distorted time domain waveforms, signal vector constellation. And through the investigation of the power spectrum density of the transmitted signal, spectral regrowth or sideband regrowth which is result from amplitude distortion can be seen. All these characteristics result in BER performance degradation due to other user interferences and intersymbol interference. The analysis technique described here applies not only to power amplifier but also to any other nonlinear components such as mixers and switches. Also the effects of adjacent channel interference and supurious emission can be analysed between different systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.82-88
• /
• 2009

An adaptive cooperation system is considered with the cooperation decision strategy based on the differences between instantaneous signal-to-noise ratio (SNR) S-D and R-D channels. Specifically, if the quality of the direct link (S-D) is better than that of the link from the relay to the destination (R-D), the source will transmit to destination directly with all scheme's transmitted power. Otherwise, the source broadcasts the signal with a lower power in the first time slot. Then, in the second time slot, if the relay decodes its received signal correctly, it re-transmits the re-encoded signal to the destination else the source will transmit again with the remaining power. Firstly, the spectral efficiency is derived by calculating the probabilities of direct transmission and cooperation mode. Subsequently, the BER performance for the adaptive cooperation schemes is analyzed by considering the BER routine of each mode. Finally, the Monte-Carlo simulation results are presented to confirm the performance enhancement offered by the proposed schemes.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.274-280
• /
• 2000

The fact that error probability is higher in wireless communication environment than the one in a fixed network makes it inappropriate to apply the same DLC (Data Link Control) protocol used in a wireline network to a wireless network. And since the existing DLC protocol for wireless network was optimized for low-rate data service, it is not suitable for a wireless network environment which should support high-speed and multimedia traffic. Therefore it is desperate to have a new DLC protocol for todays wireless mobile communication environment. In this paper, we propose an error control scheme in WATM (Wireless Asynchronous Transfer Mode) environment. which supportsmultiple traffic attributes, high-speed, multimedia data service. In this paper we modified the existing ASR ARQ (Adaptive Selective Repeat Automatic Repeat Request) protocol where cells exceeding maximum allowable delay range are discarded. And adding FEC (Forward Error Correction) for delay-sensitive traffic resulted in smaller increase of transmission delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1707-1717
• /
• 1998

Polyphase filtering techniques is used to suppress the narrowband jammer signal such as USDC TDMA overlaying the band occupied by DS-CDMA system. In the proposed jammer suppression, the received signal is separated into 64 subchannels in two stages by polyphase filtering and the location of the narrowband jammer signal is determined by measuring each subchannel power and the contaminated subchannels are simply blocked. The $E_{b}/N_{0}$ 0/ improvement of the CDMA system from jammer suppession was outstanding. The $E_{b}/N_{0}$ degradation in comparison with a performance of no jammer is around 0.8dB in the worst case. The results are also compared with those of linear prediction jammer suppression. The implementation of the ployphase jammer suppression requires great amount of data processing and computation compared to linear predication filter. Thus it is more appropriate to implement with a ASIC rather than WITH several DSPs for user terminals of forward link.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1060-1067
• /
• 2004

In a CDMA system, the rapacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power. The capacity of CDMA2000 1x system is considered to be limited by the forward link capacity. In this paper, we show that the transmitted power can represent the total cell load and we propose a load control scheme for CDMA2000 1x system. CDMA2000 1x system has fast power control scheme and we can measure forward link cell load by using total transmitted power. In the proposed algorithm, by monitoring the total transmit power, we can simply adjust data rate to channel conditions and efficiently use radio resources. The proposed algorithm is practical algorithm to implement in the power controlled CDMA systems and enhances the system throughput and quality of service(QoS)

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.755-763
• /
• 2003

To improve performance over noisy wireless channels, mobile wireless networks employ forward error correction(FEC) techniques. The performance of static FEC algorithms, however, degrades by poorly matching the overhead of their correction code to the degree of the fluctuating underlying channel error. This paper proposes an adaptive FEC technique called FECA(FEC-level Adaptation), which dynamically tunes FEC strength to the currently estimated channel error rate at the data link layer. FECA is suitable for wireless networks whose error rate is high and slowly changing compared to the round-trip time between two communicating nodes. One such example network would be a sensor network in which the average bit error rate is higher than $10^{-6}$ and the detected error rate at one time lasts a few hundred milliseconds on average. Our experiments show that FECA performs 15% in simulations with theoretically modeled wireless channels and in trace-driven simulations based on the data collected from real sensor networks better than any other static FEC algorithms.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.692-698
• /
• 1999

In this paper, we proposed the channel assignment scheme for the CDMA(Code Division Multiple Access) cellular system using power allocation concept. Also, the performance of the proposed scheme was analyzed and it was compared with the channel assignment scheme using the fixed power allocation method in the CDMA cellular system. The proposed scheme allocates the power adaptively in according to the traffic loads and the traffic distribution pattern of neighbor cells in the forward link. We found that total call blocking probability (Pr) is more dependent on blocking probability($P_B$) than outage probability (Po) under physical number of channels ($C_{th}$)=30. Pr(Call Blocking Probability) is dependent on $P_B$(Blocking Probability) and Po(Outage Probability) at the same ratio under $C_{th}$=32, in which case P$P_{TA}$(blocking probability for the adaptive power allocation) is greater than $P_{TF}$(blocking probability for the fixed power allocation) about 6%.