• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.185-190
• /
• 2020

Background: Backward walking exercise may offer some unique and potentially beneficial differences compared with forward walking exercise. There is still a lack of research on backward walking exercises and forward head posture. Objects: The purpose of this study was to determine the effect of backward walking exercise on college students forward head posture in their 20s. Methods: Twenty-one subjects participated in the experiment. The subjects were those with a craniovertebral angle (CVA) of 55 degrees or less who understood the purpose and method of this study and voluntarily agreed. A camera capable of taking pictures of the lateral plane was installed at a distance of 1.5 meters before exercising. Pictures were taken before walking backward, and after walking for 15 minutes on the treadmill, the images were taken in the same way. The composition of the backward walking exercise was walking at a rate of 1.0 for 5 minutes, and the remaining 10 minutes were walking at a rate of 1.5. Wilcoxon signed rank test was used to compare CVA and craniorotational angle (CRA) before and after exercise. Results: As a result of this study, there was a significant difference in CVA before and after exercise (p < 0.05). There was a significant difference in CRA before and after exercise (p < 0.05). Conclusion: The backward walking exercise and verbal command seems to have positively influenced the changes in CVA and CRA among college students in their 20s. It seems that studies to confirm balance or muscle activity as well as changes in forward head posture through the long-term intervention of the backward walking exercise should be conducted.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.819-825
• /
• 1996

Nonlinear dynamic characteristics of rubbing phenomenon in rotor dynamics are investigated experimentally and numerically. Rubbing phenomenon occurs when rotor contacts with stator during whirling and causes the large amplitude of vibration, high whirl frequencies, and possibly catastrophic failure. Rubbing has various types of forward whirl, backward rolling, backward slipping, and partial rub depending on the system parameters of rotating machinery and running speed. Experiments are performed for forward whirl and backward whirl. And numerical analysis are conducted to explain the changes between backward rolling and backward slipping. Experimental and numerical results show that the types of whirling motion depends on the friction coefficient between rotor and stator and the eccentricity of rotor.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.3
• /
• pp.1-9
• /
• 2016

PURPOSE: The purpose of this study was to identify the effects on flexibility of bridge and plank exercises using sling suspension on an unstable surface. METHODS: The subjects of this study were 20 healthy adults in their 20s (plank=10, bridge=10). Both types of exercise were performed three times per week for a period of four weeks. Each exercise was performed in the front and side direction. Exercise intensity was altered through the use of a sling, which was placed at the knee and ankle. Flexibility at trunk forward flexion and backward extension was measured. The trunk forward flexion was measured at sitting position. The trunk backward extension was measured at prone position. The data were analyzed by Two-way ANOVA. RESULTS: There were significant differences in the pre- and post-test for both the bridge and plank exercise groups. In the bridge exercise, significant differences were shown in the trunk forward flexion and the trunk backward extension (p<.05). In the plank exercise, a significant difference was shown in the trunk backward extension (p<.05). No significant differences were noted in interaction effect or the main effects in either group. CONCLUSION: Bridge and plank exercises on an unstable surface improve flexibility. The bridge exercise improves the flexibility of the forward and backward muscles of the trunk. The plank exercise improves the flexibility of the forward muscles of the trunk. This information would be useful in the development of exercise programs including bridge and plank exercises for improving flexibility and core stability.

• (The) Korean Journal of Educational Psychology
• /
• v.31 no.4
• /
• pp.819-845
• /
• 2017

Although testing is usually done for purposes of assessment, previous research over the past 100 years indicates that testing is an effective tool for learning. Testing or retrieval practice of previously studied materials can enhance learning of that previously studied information and/or learning of subsequently presented new information. The former is referred to as the backward effect of testing whereas the latter is referred to as the forward effect of testing. Thus far, however, the literature has not isolated these two effects and most previous research focused on the backward effect. Only recent laboratory research provided evidence that there is a forward effect of testing. The present study provides a review of research on this forward and backward effect of testing, focusing on testing procedures of the effects, empirical evidence, current theoretical explanations, and issues to resolve in order to make use of testing effect in educational settings. The reviews clearly show that testing enhances memory of previously learned information by working as memory modifier and learning of newly presented information by affecting learners' metacognition, implying that testing is not just an assessment of learning, but also an effective tool for learning.

• Physical Therapy Korea
• /
• v.28 no.4
• /
• pp.273-279
• /
• 2021

Background: Lunge exercises are lower extremity rehabilitation and strengthening exercises for patients and athletes. Most studies have shown the effectiveness of the forward and backward lunge exercises for treating patellofemoral pain and anterior cruciate ligament injuries (by increasing lower extremity muscle activity) and improving kinematics. Objects: However, it is not known how the two different lunge movements affect trunk muscle activities in healthy individuals. The purpose of this study was to investigate the electromyographic activity of the rectus abdominis and erector spinae muscles during forward and backward lunge exercises in healthy participants. Methods: Twelve healthy participants were recruited. Electromyographic activity of the rectus abdominis and erector spinae was recorded using surface electrodes during forward and backward lunges, and subsequently normalized to the respective reference voluntary isometric contractions of each muscle. Results: Activity of the erector spinae was significantly higher than that of the rectus abdominis during all stages of the backward lunge (p < 0.05). The activity of the erector spinae was significantly greater during the backward than forward lunge at all stages (p < 0.05). Conclusion: Backward lunging is better able to enhance trunk motor control and activate the erector spinae muscles.

• Physical Therapy Korea
• /
• v.12 no.1
• /
• pp.63-70
• /
• 2005

To compare the effects of forward walking and backward walking on surface electromyographic analysis of quadriceps muscles at treadmill grades of 0%, 5% and 10%, subjects were randomized to eleven athletics (5 females, 6 males), with a mean age of 17.8 years, and a SD of 4.66 years. The values of the surface electromyographic (SEMG) activity of the rectus femoris (RF), vastus lateralis (VL) and vastus medialis oblique (VMO) were measured during forward walking and backward walking on a treadmill at grades of 0, 5 and 10%. The subjects walked for approximately 10 seconds at 4.0 km/h. The data were analyzed by repeated measuring of the two-way ANOVA and analyzed by a paired t-test between forward walking and backward walking. The SEMG activity levels of the RF, VL and VMO were the highest when both the forward walking and backward walking increased incrementally for treadmill grades of 0% to 10%, but the VMO/VL ratio had no significant changes. The SEMG activity levels of the RF, VL and VMO were significantly different between directions. However, SEMG activity levels of the RF, VL, VMO and VMO/VL ratio did not show significant difference among the treadmill grades. No statistically significant interactions were detected between the direction of walking and treadmill grade. Backward walking on the treadmill at 4 km/h and grades of 0%, 5%, 10% elicited a greater SEMG activity on the quadriceps muscles than did forward walking under the same conditions. The results suggest that the quadriceps may be effectively activated by performance at treadmill grades of 10%. This investigation confirms that backward walking up an incline may place additional muscular demands on individuals.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.162-166
• /
• 2003

In combined forward-backward extrusion with controlled forward speed by a counter punch, accurate parts with forward rod can be formed. As an extension of this method, reverse extrusion is proposed, in which the extruded forward rod is pushed back while the main punch is kept at the final position after the forward-backward extrusion process. The experiment is carried out using lead as a model material. With the reverse extrusion method, longer forward rods can be formed without under-filling defect than that by combined extrusion with controlling extrusion speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.837-842
• /
• 2004

The positions of rotating sound sources have been localized by experiments with the Doppler effects removed. In order to do-Dopplerize the sound signals emitted from moving sources, two kinds of signal reconstruction methods were applied. One is the forward propagation method and the other is the backward propagation method. Forward propagation method analyze the source emission time based on the instantaneous distance between sensors and the assumed source position, then the signals are reconstructed with respect to the emission time. On the other hand, the backward method uses time delay to do-Dopplerize the acquired data for the received time of reference. In both techniques, the reconstructed signal data were processed using beamforming algorithm to produce power distributions at the frequency of interest. Experiments have been carried out for varying frequencies, rotating speeds and the object distances. Forward propagation method has shown better performance in locating source position than the backward propagation method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.433-436
• /
• 2009

This study is concerned with an effect of frictional condition in a forward/backward combined extrusion process. Generally, the material flow of the billet is influenced by the corners of the die cavity, the ratio in reduction in area, and thickness ratio of backward can thickness to forward can thickness. In addition, the frictional condition in contact area between the billet and the punch/die also affect the material flow. This paper investigated the effect of frictional condition for variable friction factors. The FEM simulation has been carried out in order to examine the effect of frictional condition. Deformation patterns and flow characteristics were examined in terms of design parameters such as extruded length ratio etc. Die pressure exerted on the die-workpiece interface is calculated by the simulation results and analyzed for safe tooling. Therefore the numerical simulation works provide a combined extrusion process of stable cold forging process planning to avoid the severe damage on the tool.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.86-92
• /
• 2005

In this paper a forward-backward can extrusion process are analyzed by using rigid-plastic FEM simulation. FEM simulation is conducted to investigate forming characteristics such as deformation modes fur different process parameters. Design parameters such as thickness ratio, punch angle, friction factor and diameter ratio are selected to study the effect of them on the pattern of material flow. The analysis is focused mainly on the influences of the design factors on deformation pattern in terms of forming load, extruded length ratio and volume ratio. It is known for the simulation that the forming load, the length ratio and the volume ratio increase as the thickness ratio (TR), the wall thickness in forward direction to that in backward direction, decreases. The various punch angles have slight influence on the forming load. length ratio and volume ratio. However friction factor have little effect on the forming characteristics such as the forming load, volume ratio and so on. In addition the forming load increases as diameter ratio (DR), the outer diameter of a can in forward direction to that in backward direction, increases. Furthermore the extruded length ratio is lowest with a certain value of DR=0.85 among diameter ratios. Pressure distribution exerted on the die-material interface is illustrated schematically.