• 상하수도학회지
• /
• 제30권4호
• /
• pp.417-425
• /
• 2016

Desalination is a key technology to overcome water shortage problem in a near future. High energy consumption is an Achilles' heel in desalination technology. Osmotically driven membrane processes like forward osmosis(FO) was introduced to address this energy issue. Characterizing membrane properties such as water permeability(A), salt permeability(B), and the resistance to salt diffusion within the support layer($K_{ICP}$) are very important to predict the performance of scaled-up FO processes. Currently, most of researches reported that the water permeability of FO membrane was measured by reverse osmosis(RO) type test. Permeating direction of RO and FO are different and RO test needs hydraulic pressure so that several problems can be occurred(i.e. membrane deformation, compaction and effect of concentration polarization). This study focuses on measuring water permeability of FO membrane by FO type test results in various experimental conditions. A statistical approach was developed to evaluate the three FO membrane properties(A, B, and $K_{ICP}$) and it predicted test result by the internal and external concentration polarization model.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.21-27
• /
• 2013

The present study explored the way to desalinate seawater for agricultural irrigation using forward osmosis (FO) process using liquid fertilizer as draw solution. FO experiments were performed in a cross flow mode using flat sheet FO membrane. The effect of membrane orientation, flow rate, and draw solution concentration on the performance of forward osmosis was investigated by measuring water flux of forward osmosis membrane. The water flux when the draw solution was placed against the membrane active layer was lower than the water flux when the feed solution was placed against the membrane active layer. This results indicated that the decrease of effective osmotic pressure by dilutive internal concentration polarization was less than that by concentrative internal concentration polarization. Increasing flow rate from 66.7 to 133.1 $cm^3$/min resulted in increase of the water flux when the membrane active layer orient to draw solution and feed solution, respectively. The reduction of resistance to water flow increased water flux at higher flow rate. The water flux of FO membrane increased with increasing draw solution concentration from 10000 to 30000 mg/L. The water flux for $KH_2PO_4$ draw solution was similar to that for commercial fertilizer. Optimization of FO process would contribute to economically desalinate brackish water for agricultural use.

• 상하수도학회지
• /
• 제35권1호
• /
• pp.39-52
• /
• 2021

The global water shortage is getting more attention by global climate change. And water demand rapidly increases due to industrialization and population growth. Desalination technology is being expected as an alternative water supply method. Desalination technology requires low energy or maintenance costs, making it a competible next generation technology, with examples such as forward osmosis (FO), membrane distillation (MD), capacitive deionization (CDI), and electrodialysis (ED) to compete with reverse osmosis (RO). In order to identify recent research trends in desalination technologies (FO, MD, RO, CDI, and ED) between 2000-2020, a bibliometric analysis was conducted in the current study. The number of published papers in desalination technology have increased in Desalination and Journal of Membrane Science mainly. Moreover, it was found that FO, MD, RO, CDI, and ED technologies have been applied in various research areas including electrochemical, food processing and carbon-based material synthesis. Recent research topics according to the desalination technologies were also identified.

• 멤브레인
• /
• 제23권5호
• /
• pp.343-351
• /
• 2013

혼합 비료를 유도용액으로 하는 정삼투식 해수담수화에서 담수화 성능에 대한 유도용액 농도의 영향을 조사하였다. 혼합비료용액(DS)의 농도가 증가함에 따라 수투과선속은 거의 선형적으로 증가하였으나, PR (performance ratio)은 감소하였다. 또한 혼합비료용액의 농도가 600 g/L일 때, 해수 및 탈이온수를 각각 공급용액으로 하였을 경우 각각의 PR은 5.39 및 6.50이었다. 혼합비료용액의 농도가 증가함에 따라 N, P 및 K의 역용질선속은 거의 선형적으로 증가하였으나, 비역용질선속은 감소하였다. 역용질선속과 비역용질선속은 모두 질소(N) > 칼륨(K) > 인(P) 순으로 높게 나타났다.

• 멤브레인
• /
• 제28권1호
• /
• pp.45-54
• /
• 2018

본 연구는 비료를 이용한 정삼투식 해수담수화에서 가장 적합한 유도용액을 찾기 위한 연구이다. 이를 위하여 삼투압, 용해도 및 pH를 고려하여 20종의 혼합 비료를 선정하고, 수투과선속과 질소, 인 및 칼륨의 역용질선속과 비역용질선속을 측정하여 각 혼합비료 유도용액의 성능을 평가하였다. KCl을 함유한 혼합비료의 수투과선속이 다른 혼합비료에 비해 높게 나타났다. ${NO_3}^-$를 함유한 혼합비료 유도용액의 질소 역용질선속과 비역용질선속은 ${NO_3}^-$를 함유하지 않은 혼합비료 용액에 비해 상대적으로 높게 나타났다. 또한 $NH_4H_2PO_4$ 및 $KNO_3$를 각각 함유한 혼합비료 유도용액의 인 및 칼륨에 대한 역용질선속과 비역용질선속은 $NH_4H_2PO_4$ 및 $KNO_3$를 함유하지 않은 혼합비료 용액에 비해 상대적으로 높게 나타났다. $(NH_4)_2HPO_4$와 KCl의 혼합비료 유도용액은 비료의 필수성분인 질소, 인 및 칼륨을 모두 포함하고 있고, 수투과선속이 클 뿐만 아니라 질소, 인 및 칼륨에 대한 역용질선속이 작아 정삼투식 해수담수화용 유도용액의 유도물질로서 가장 적합하다고 판단된다.

• 공업화학전망
• /
• 제14권6호
• /
• pp.9-20
• /
• 2011

전 세계는 물 부족 문제를 해결하기 위한 대체수자원 개발에 다양한 노력을 기울이고 있으며, 그 중에 해수 담수화 기술이 가장 주목받고 있다. 특히 역삼투 방식의 해수담수화기술은 기존 증발식에 비해 에너지 소비량이 적기 때문에 매년 10% 이상의 높은 성장률을 기록하고 있다. 그러나 역삼투 방식의 해수담수화는 지표수를 이용하는 시스템에 비해 상당히 많은 에너지를 필요로 한다. 따라서 에너지 효율을 높이기 위한 다양한 공정 개발이 시도되고 있으며, 그 중에 대표적인 기술이 삼투현상을 이용한 FO (Forward Osmosis)와 PRO (Pressure Retarded Osmosis) 공정이다. 본 논문에서는 역삼투막을 이용한 해수담수화 기술의 현황과 한계를 살펴보고, 현 해수담수화공정을 보완할 기술로써 FO와 PRO 공정개발에 관한 최근 연구 동향과 이러한 신기술의 상용화에 필수적으로 요구되는 막에 대한 개발 현황을 살펴보았다.

• 대한토목학회논문집
• /
• 제42권3호
• /
• pp.351-357
• /
• 2022

본 연구에서는 하수재이용과 해수담수화를 동시에 진행할 수 있는 규모 1,000 m³/d의 FO-RO 융합공정과 동일한 규모의 기존 SWRO 공정의 탄소배출량을 계산하여 비교 분석하였다. FO-RO 융합공정은 FO 공정을 도입하여 RO 공정 원수를 희석시킬 수 있기 때문에 RO 공정의 요구 압력이 감소되고 이는 곧 에너지소비량 감소로 이어진다. 에너지소비량에 따른 탄소배출량은 FO-RO 융합공정이 SWRO 공정보다 -0.73 kgCO₂(coal로 전력생산 시) 낮으며, FO 공정 추가 건설로 인해 발생되는 탄소배출량은 +0.16 kgCO₂로 계산되어 FO-RO 융합공정의 총 탄소 배출량이 더 낮은 것으로 나타났다. 하지만, Coal나 oil과 같은 화석연료로 전력을 생산하지 않고, 전력생산 시 탄소배출량이 적은 nuclear나 solar 등으로 사용하면 FO-RO 융합공정의 총 탄소배출량이 SWRO 공정보다 더 높은 것으로 나타났다. 즉, 탄소배출량 관점에서는 전력생산 시 필요 재료(예: coal, oil, nuclear, solar 등)에 따라 친환경적인 공정 판단 여부가 결정되므로 FO-RO 융합공정 도입 필요성을 좌우하는 핵심 요소라고 할 수 있다.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.68-74
• /
• 2016

Hydraulic fracturing of wells during oil and gas (O&G) exploration consumes large volumes of fresh water and generates larger volumes of contaminated wastewater with high salinity. It is critical to treat and reuse the O&G wastewater in a cost-effective and environmentally sound manner for sustainable industrial development and for meeting stringent regulations. Recently, forward osmosis (FO) has been examined if it is a promising solution for treatment and desalination of complex industrial streams and especially fracturing flowback and produced waters. In the present study, the performances of a plate-and-frame FO membrane element and a module (6 elements combined in series) were investigated for concentrating high TDS wastewater. An FO module has achieved up to 64 % water recovery (i.e., concentration factor of 2.76) from 10,000 ppm wastewaters and can concentrate feed streams salinities to greater than 30,500 ppm.

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.161-172
• /
• 2015

Forward osmosis (FO) is an emerging membrane technology with potential applications in desalination and wastewater reclamation. The osmotic pressure gradient across the FO membrane is used to generate water flux. In this study, flux performance and foulant deposition on the FO membrane were systematically investigated with a co-current cross-flow membrane system. Sodium alginate (SA), bovine serum albumin (BSA) and tannic acid (TA) were used as model foulants. Organics adsorbed on the membrane were peeled off via oscillation and characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). When an initial flux of $8.42L/m^2h$ was applied, both flux reduction and foulant deposition were slight for the feed solution containing BSA and TA. In comparison, flux reduction and foulant deposition were much more severe for the feed solution containing SA, as a distinct SA cake-layer was formed on the membrane surface and played a crucial role in membrane fouling. In addition, as the initial SA concentration increased in FS, the thickness of the cake-layer increased remarkably, and the membrane fouling became more severe.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.411-421
• /
• 2017

Forward osmosis (FO) is an emerging technology which can possibly make the desalination process more cost and energy efficient. One of the major factors impeding its growth is the lack of an appropriate draw solute. The present study deals with the identification of potential draw solutes, and rank them. The comparison was carried out among ten draw solutes on the basis of four main parameters namely; water flux, reverse salt diffusion, flux recovery and cost. Each draw solute was given three 24 hour runs; corresponding to three different concentrations; and their flux and reverse salt diffusion values were calculated. A fresh membrane was used every time except for the fourth time which was the flux recovery experiment conducted for the lowest concentration and the change of flux and reverse salt diffusion values from the initial run was noted. The organic solutes inspected were urea and tartaric acid which showed appreciable values in other parameters viz. reverse salt diffusion, flux recovery and cost although they generated a lower flux. They ranked 5th and 8th respectively. All the experimented draw solutes were ranked based on their values corresponding to each of the four main parameters chosen for comparison and Ammonium sulfate was found to be the best draw solute.