• Journal of the Korean institute of surface engineering
• /
• v.56 no.2
• /
• pp.160-168
• /
• 2023

Recently, investigation on metallization is a key for a stretchable display. Amorphous metal such as Ni and Zr based amorphous metal compounds are introduced for a suitable material with superelastic property under certain stress condition. However, Ni and Zr based amorphous metals have too high resistivity for a display device's interconnectors. In addition, these metals are not suitable for display process chemicals. Therefore, we choose an aluminum based amprhous metal Al-Mo as a interconnector of stretchable display. In this paper, Amorphous Forming Composition Range (AFCR) for Al-Mo alloys are calculated by Midema's model, which is between 0.1 and 0.25 molybdenum, as confirmed by X-ray diffraction (XRD). The elongation tests revealed that amorphous Al-20Mo alloy thin films exhibit superior stretchability compared to pure Al thin films, with significantly less increase in resistivity at a 10% strain. This excellent resistance to hillock formation in the Al20Mo alloy is attributed to the recessed diffusion of aluminum atoms in the amorphous phase, rather than in the crystalline phase, as well as stress distribution and relaxation in the aluminum alloy. Furthermore, according to the AES depth profile analysis, the amorphous Al-Mo alloys are completely compatible with existing etching processes. The alloys exhibit fast etch rates, with a reasonable oxide layer thickness of 10 nm, and there is no diffusion of oxides in the matrix. This compatibility with existing etching processes is an important advantage for the industrial production of stretchable displays.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4072-4083
• /
• 2022

Ultrasonic impact treatment (UIT) is carried out on the Ni-based alloy stainless steel pipe gas tungsten arc welding (GTAW) girth weld, the differences of microstructure, microhardness and shear strength distribution of the joint before and after ultrasonic shock are studied by microhardness test and shear punch test. The results show that after UIT, the plastic deformation layer is formed on the outside surface of the Ni-based alloy overlayer, single-phase austenite and γ type precipitates are formed in the overlayer, and a large number of columnar crystals are formed on the bottom side of the overlayer. The average microhardness of the overlayer increased from 221 H V to 254 H V by 14.9%, the shear strength increased from 696 MPa to 882 MPa with an increase of 26.7% and the transverse average residual stress decreased from 102.71 MPa (tensile stress) to -18.33 MPa (compressive stress), the longitudinal average residual stress decreased from 114.87 MPa (tensile stress) to -84.64 MPa (compressive stress). The fracture surface has been appeared obvious shear lip marks and a few dimples. The element migrates at the fusion boundary between the Ni-based alloy overlayer and the austenitic stainless steel joint, which is leaded to form a local martensite zone and appear hot cracks. The welded joint is cooled by FA solidification mode, which is forming a large number of late and skeleton ferrite phase with an average microhardness of 190 H V and no obvious change in shear strength. The base metal is all austenitic phase with an average microhardness of 206 H V and shear strength of 696 MPa.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• Geomechanics and Engineering
• /
• v.36 no.6
• /
• pp.619-629
• /
• 2024

To improve the utilization rate of phosphate tailings (PTs) and widen the sources of subgrade filler, the PTs is employed to modify clay, forming a PTs modified clay, applied in the subgrade. Accordingly, the environmental friendliness of PTs was investigated. Subsequently, an optimal proportion was determined through compaction and California Bearing Ratio (CBR) experiments. Afterward, the stability of mixture with the optimal proportion was further evaluated through the water stability and dry-wet stability experiments. Finally, via the gradation and microstructure experiments, the strength mechanism of PTs modified clay was analyzed. The results show that the PTs were classified in the non-hazardous solid wastes, belonging to Class A building materials. With the increase of PTs content and the decrease of clay content, the optimum water content and the swelling degree gradually decrease, while the maximum dry density and CBR first increase and then decrease, reaching their peak value at 50% PTs content, which is the optimal proportion. The resilient modulus of PTs modified clay at the optimal proportion reaches 110.2 MPa. The water stability coefficient becomes stable after soaking for 4 days, while the dry-wet stability coefficient decreases with the increase of cycles and tends to be stable after 8 cycles. Under the long-term action, the dry-wet change has a greater adverse impact than continuous soaking. The analysis demonstrates that the better strength mainly comes from the skeleton role of PTs and the cementation of clay. The systematic laboratory test results and economic analysis collectively provide data evidence for the advantages of PTs modified clay as a subgrade filler.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.369-375
• /
• 2023

Radon, a carcinogenic substance generated from soil or building materials, have to be fundamentally blocked from entering indoors. In this study, ethylene vinyl acetate (EVA)/silicone emulsions with excellent mechanical and thermal properties and effective blocking of radon gas were prepared by using radiation technology. As the electron-beam irradiation does increased, a partially crosslinked structure was formed in EVA molecular chain, increasing tensile properties and adhesive strength. The EVA/silicone film showed excellent thermal stability without deformation. In addition, the non-irradiated EVA/silicone film showed a radon blocking rate of about a 75%, while the EVA/silicone film irradiated with 3 and 5 kGy showed an excellent radon blocking rate of over 90% due to the formation of crosslinked structure in the EVA molecular chain. These results indicated that the radiation technology can effectively block radon by forming a partially crosslinked structure of EVA/silicone emulsion to improve tensile property, adhesive strength, and deformation stability.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.191-198
• /
• 1985

Seven different strains of lactic bacteria and 13 combinations of these microorganisms were tested for their acid forming capacity on a vegetable milk made from lupinseed protein concentrate(LPC). L acidophilus, L casei, S. lactis, L. mesenteroides, mixed culture of L. acidophilus and S. thermophilus, and mixed culture of S. lactis and L. mesenteroides were selected and further tested for their growth pattern and acid forming property on lupinseed milk both untreated and partly hydrolized one with carbohydrate decomposing enzymes. The enzyme hydrolized lupinseed milk had 1.5 folds of total free sugar, 8.2 folds of fructose, 3 folds glucose, 2.3 folds maltose, compared to the untreated lupinseed milk. For the untreated lupinseed milk, L. mesenteroides was appeared to be most suitable microorganism having the maximum cell concentration of 1.0 $\times$ 10$^{9}$ $m\ell$ and the final pH 4.40 with the acidity 0.46％. For the enzyme treated lupinseed milk, mixed culture of L. acidophilus and S. thermophilus showed the best performance having 1.9$\times$10$^{9}$ $m\ell$ maximum cell number and the final pH and acidity were 3.69 and 1.13％, respectively. Lactic acid fermentation altered the physical property of lupinseed milk; by fermentation the viscosity generally increased with untreated lupinseed milk, but decreased with enzyme hydrolized one. The viscosity change and sedimentation rate of fermented milk varied with the type of lactic bacteria. The results of sensory evaluation indicated that S. lactis, L. casei, mixed culture of S. lactis and L. mesenteroides, and mixed culture of L. acidophilus and S. thermophilus, grown on enzyme hydrolized lupinseed milk, could produce acceptable lactic beverage.

• The Korean Journal of Zoology
• /
• v.30 no.1
• /
• pp.53-70
• /
• 1987

The morphological study on the parenchymal cells in the adult planaria performed to observe their cytochemical and ultrastructural characteristics. The results are as follows. Nine types of cells are found in parenchyma. 1. Free parenchymal cell: These cells contain several chromatoid bodies around the nucleus. Heterochromatins are evenly dispersed in large nucleus. These cells are abundant in free ribosomes. 2. Fixed parenchymal cells: These cells have well-developed granular endoplasmic reticulum, mitochondria and Golgi complex but they contain the cytosols exhibiting electron-lucencies. 3. Rhabdite-forming cells: These cells contain the electron-dense rhabdite granules of up to about 0.3 x 0.9 $\mu$m in size. Rhabdite-forming cells have well-developed cell organelles, granular endolplasmic reticulum, mitochondria and Golgy complex. 4. A-type of basophilic granule cells: These cells contain irregularly-shaped granules exhibiting alcianophilia. These granules surrounded by a limited membrane, approximately 1.4 x 0.7 $\mu$m in size, are accumulated in the cytoplasm. 5. C-type of basophilic granule cells: These cells contain electron-dense granules of less than 0.2 $\mu$m in size, which exhibit PAS- positive reaction. This type of granule is also found in the muscle layer of parenchyma. 6. D-type of basophilic granule cells: This type of granule cell occurs only in the parenchyma around reproductive organ. The granules have cytochemical characteristics that they exhibit strongly positive reaction with PAS and weakly eosinophilic property. These electron-dense granules, which are 0.2 to 0.6 $\mu$m in length, have oval shapes. 7. E-type of basophilic granule cells: These cells are found only in the parenchyma around re productive organ. The granules contained in a small number in the cell, exhibit PAS-positive reaction and have an average size of 0. 2pm. 8. Eosinophilic granule cells: These cells contain a large number of eosinophilic granules which have relatively diverse sizes from 0.3 x 0.2 to 0.8 x 0.4 $\mu$m. Most of granules are round or irregularly-shaped and highly electrondense. These cells have an array of well-developed granular endoplasmic reticulum of which cisternae are distened. 9. Transparent granule cells contain electron-lucent granules which exhibit negative reactions with three kinds of cytochemical methods used in this experiment.

• Korea Real Estate Review
• /
• v.24 no.1
• /
• pp.77-90
• /
• 2014

With the purpose of preventing improper development on the national land, the land development permission system which is performed from 2002 has meaning as a type of limiting the property right, but modification on the details of traditionally understood land ownership is inevitable. Also, releasing the development prohibit on the land not only stop in recovering the freedom for land development, but also can be interpretated as a cause of forming the land development right, therefore the purpose of this study is to develop this into a real right. When we look at the development activity permission as a form of limiting the property right, constitutional problems of basis for that limit and compensation demand can occur. However, that limit can be recovered or relieved through permitting the development activity, therefore the compensation problem can be solved. Due to the development activity permission system, the land development right was separated from the land ownership to be communalized, and now, the land ownership only has condition use right left and don't have the future condition change right in principle, therefore modifying the traditional concept of land ownership is inevitable. By the virtue of the land ownership authority, the land development permission system must have the property to separate the development right as the independent right to be authorized of its legitimacy. Without these properties, the land development permission system cannot satisfy the social necessity of the land development right and its discussion under the category of the land ownership limit theory can't be deviated. In the existing "Civil Law" or in the Land Regulation Law system, there are many difficulties and limits in generalizing the land development right as a real right. Therefore, it is considered that by establishing a social law idea of Framework Act on the Land to characterize the land right theory in the real right theory, the land development permission system or the development right theory should be studied and developed independently and systematically.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.227-240
• /
• 2011

New concepts and ideas often result from extensive recombination of existing concepts or ideas. Both researchers and developers build on existing concepts and ideas in published papers or registered patents to develop new theories and technologies that in turn serve as a basis for further development. As the importance of patent increases, so does that of patent analysis. Patent analysis is largely divided into network-based and keyword-based analyses. The former lacks its ability to analyze information technology in details while the letter is unable to identify the relationship between such technologies. In order to overcome the limitations of network-based and keyword-based analyses, this study, which blends those two methods, suggests the keyword network based analysis methodology. In this study, we collected significant technology information in each patent that is related to Light Emitting Diode (LED) through text mining, built a keyword network, and then executed a community network analysis on the collected data. The results of analysis are as the following. First, the patent keyword network indicated very low density and exceptionally high clustering coefficient. Technically, density is obtained by dividing the number of ties in a network by the number of all possible ties. The value ranges between 0 and 1, with higher values indicating denser networks and lower values indicating sparser networks. In real-world networks, the density varies depending on the size of a network; increasing the size of a network generally leads to a decrease in the density. The clustering coefficient is a network-level measure that illustrates the tendency of nodes to cluster in densely interconnected modules. This measure is to show the small-world property in which a network can be highly clustered even though it has a small average distance between nodes in spite of the large number of nodes. Therefore, high density in patent keyword network means that nodes in the patent keyword network are connected sporadically, and high clustering coefficient shows that nodes in the network are closely connected one another. Second, the cumulative degree distribution of the patent keyword network, as any other knowledge network like citation network or collaboration network, followed a clear power-law distribution. A well-known mechanism of this pattern is the preferential attachment mechanism, whereby a node with more links is likely to attain further new links in the evolution of the corresponding network. Unlike general normal distributions, the power-law distribution does not have a representative scale. This means that one cannot pick a representative or an average because there is always a considerable probability of finding much larger values. Networks with power-law distributions are therefore often referred to as scale-free networks. The presence of heavy-tailed scale-free distribution represents the fundamental signature of an emergent collective behavior of the actors who contribute to forming the network. In our context, the more frequently a patent keyword is used, the more often it is selected by researchers and is associated with other keywords or concepts to constitute and convey new patents or technologies. The evidence of power-law distribution implies that the preferential attachment mechanism suggests the origin of heavy-tailed distributions in a wide range of growing patent keyword network. Third, we found that among keywords that flew into a particular field, the vast majority of keywords with new links join existing keywords in the associated community in forming the concept of a new patent. This finding resulted in the same outcomes for both the short-term period (4-year) and long-term period (10-year) analyses. Furthermore, using the keyword combination information that was derived from the methodology suggested by our study enables one to forecast which concepts combine to form a new patent dimension and refer to those concepts when developing a new patent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.5
• /
• pp.401-408
• /
• 1985

In order to develop new types of product which can offer a sanitary and preservative duality, and convenience to consumers in marketing and cooking particularly in urban area, two processing methods of ready-to-cook food materials with dark fleshed fishes like sardine and mackerel were investigated. A method applied, in this work, is processing of ready-to-cook sardine meat "surimi" in which sardine meat is treated with alkaline solution to stabilize myofibrillar proteins, washed thoroughly with water to remove soluble components, and added with a proper amount of polyphosphate and sorbitol to enforce the functional property of meat such as water holding capasity, elasticity, and gel strength. The textural properties of fish meat paste made from the "surimi" meat were greatly dependent upon the stability of myofibrillar proteins and the elimination of water soluble components. The salt soluble proteins of sardine meat were so unstable in post-mortem stage that the gel forming ability was lost within 3 days at $5^{\circ}C$ storage and 2 to 3 weeks even at $-20^{\circ}C$ although the freshness was well kept for a week at $5^{\circ}C$ and several months of storage at $-20^{\circ}C$. A proper way of treatment to keep the proteins stable was that fish meat must be washed with $0.4\%$ sodium bicarbonate solution followed by 3 to 4 times washing with water. This resulted in removal of $80\%$ water soluble proteins and 50 to $60\%$ lipids. The addition of polyphosphate and sorbitol affected the stability of proteins during the storage of "surimi" meat. When phosphate and sorbitol were added in the ratio of $0.3\%:\;0.3\%,\;0.6\%:\;3\%,\;0.6\%:\;6\%,\;0:\,0.3\%\;and\;0.3\%:\;0$, the gel forming ability terminated in 35 days, 21 days, 14 days, 14 days, and 14 days of storage at $-30^{\circ}C$, respectively, while that of the control was 7 days. And it was also noteworthy that at least 8.0 mg/g of salt soluble protein nitrogen content was required for gel formation.