• 전자공학회지
• /
• 제22권11호
• /
• pp.71-84
• /
• 1995

The fuzzy technologies, named with an exotic word "fuzzy", have come into fashion in recent years. However, fundamental aspects are often not emphasized or not deeply discussed. In this paper some aspects are represented, namely, the role of these technologies in this information-era and the possibilities of their application to intelligent control systems. Some Fuzzy controllers for the forming machines with a design method are also shown in view of these aspects.e aspects.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.318-322
• /
• 2002

In this paper the automatic plate forming system developed by the present research group is introduced, which would be helpful for other researchers. The present system consists of three parts : heating line information generation software, automatic heating apparatus and numerical control system. The numerical control system developed by the present authors is detailed. Performance test for the developed system has been carried out and good results has been obtained. As an extension of the present study, the present automatic plate fanning system will be applied to surfaces found in ship and offshore structure.

• 한국항해학회지
• /
• 제23권1호
• /
• pp.29-43
• /
• 1999

The production process of the compound-curved hull plates includes hull design, definition, fairing, modeling, lofting, cutting, and forming in sequence. Traditional fabrication methods and shop environment caused low level to productivity in medium and small sized shipyards. The most effective solution to solve those problems is to rationalize the layout of facilities. For the well-balanced development of domestic shipbuilding industry, it is urgently required to reduce the gap between modernized large sized shipyards and traditional small and medium sized shipyards in production technologies and efficiencies. For the efficient and accurate hull piece forming, all information from design to forming should be clarified and organized in a systematic manner. Thus, management of the information plays an important role in the computerized and automated of hull piece forming. The object of this paper is to survey the status of the field, to find out the feasibility and to introduce a draft of hull piece fabrication line for small and medium sized shipyards. The development of required system follows the object oriented technology to extend to simulation based system for carrying out physical product flow and facilities layout analysis. It is feasible to operate such a modernized facility for a group of small and medium shipyards who are unable to have each of their own facility because of its large amount of initial investment and insufficient work load.

• 한국통신학회논문지
• /
• 제29권5C호
• /
• pp.673-682
• /
• 2004

적응 빔포밍(beam-forming)기법은 디지털보청기 시스템에서 노이즈를 제거하기 위한 적절한 방식이다. 적응 빔포밍 기법은 디지털 신호처리프로세서의 발전과 더불어 최근에 주목을 받고 있는 방식으로 신호처리 과정에서 일반적으로 LMS(Least Mean Square)알고리즘을 사용하여 웨이트 벡터를 업데이트 시킨다. 본 논문에서는 신호의 환경에 따라 적응상수가 변화하는 가변스텝사이즈 알고리즘을 적용한 고속 웨이블렛 기반 적응알고리즘를 제안한다. 제안한 알고리즘을 적응 빔포머 방식인 디지털보청기 시스템에 적용하여 기존 시간영역 알고리즘과 그 특성을 비교하여 그 결과 제안한 알고리즘이 디지털보청기 시스템에 적합함을 입증한다. 그리고 제안한 알고리즘은 계산량에서도 시스템의 환경변화에도 안정하게 수렴한다는 장점이 있는 것을 보인다.

• 한국컴퓨터정보학회논문지
• /
• 제12권5호
• /
• pp.179-190
• /
• 2007

본 연구는 개성공단에 진출한 우리 인력과 북한주민들에게 우리 농산물을 제공할 것인가에 대한 대응방안을 모색하고 향후 북한지역과의 지역사회 공동체 형성을 위한 농업교류에 대한 정책적 방안을 제시하고자 하는데 목적이 있다. 지역사회 공동체 형성을 위한 농산물 계약재배를 추진하기 위해서는 첫째, 북한 체제를 이해해야 한다. 둘째, 계약재배 시 제한품목인 경우 북한과의 계약이전에 통일부와 품목, 생산량 등을 협의하여 추진해야 한다. 셋째 구체적으로 계약에 임해야 한다. 마지막으로 정부의 법적 제도적 정비와 정책적 지원이 계속 내실 있게 추진해야 하며 남북간 지역 공동체 형성에 있어 의회, 기업, 민간단체, 학계 등의 활동을 적극적으로 지원하고 국제적인 지원을 유도하는 데도 적극 나서야 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2001

Design sensitivity is calculated in the sheet metal forming process with an elasto-plastic finite element analysis and a direct differentiation method The sensitivity analysis is concerned with the time integration the constitutive relation considering planar anisotropy, shell elements and the contact scheme. The present result is compared with the result obtained with the finite difference approach in deep drawing processes. The obtained sensitivity information is applied to the simple optimization process for the sheet metal forming process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.604-609
• /
• 2001

In the sheet metal forming process, the drawbead is used to control the flow of material during the forming process. The drawbead provides proper restraining force to the material and prevents defects such as wrinkling or breakage. For these reasons, many studies for designing the effective drawbead have been conducted. For the analysis, the numerical method called the static-explicit finite element method was used. The finite element analysis code for this method has been developed and applied to the drawbead process problems. In result, convergence problem and computation time due to large non-linearity in the existing numerical analysis methods were no longer a critical problem. Futhermore, this approach could treat the contact friction problem easily by applying very small time intervals. It is expected that various results from the numerical analysis will give very useful information for the design of tools in sheet metal forming process.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.152-158
• /
• 2006

The AutoForm previously used the membrane element and it accomplished sheet metal forming analysis. The membrane analysis has been widely applied to various sheet metal forming processes because of its time effectiveness. However, it is well-known that the membrane analysis can not provide correct information for the processes which have considerable bending effects. In this research experimental results were compared with the analysis results obtained by using the shell element which is applied newly in the AutoForm commercial software. The shell element is a compromise element between continuum element and membrane element. The Finite element method by using shell element is the most efficient numerical method. From this research, it is known that FEA by using shell element can predict accurately the problems happened in actual experimental auto-body panel.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.54-58
• /
• 2001

In recent years, hydroforming technology has been one of the most important technology in automotive industry in the points of weight saving, cost reduction and qualify improvement. However, compared with traditional metal forming technology, hydroforming has much fewer information in experience and empirical knowledge. But we don't have my sufficient time and money to produce hydroforming products using real blank directly Therefore Simulation is essential in hydrofonrung technology development. In this paper, we simulate the side member as the tubular hydroforming technology. The manufacturing process of side member' consists of pre_bending, pre_forming, and hydroforming of a thin tube. Variables such as internal pressure, end feeding, and tool geometry are optimized to improve the forming safety. And we simulate side member according to several lubricant conditions. from those simulations, we find that strain distributions can be reduced well by internal pressure and end feeding control, and lubrication is the most important thing in hydroforming process.

• 소성∙가공
• /
• 제12권4호
• /
• pp.401-407
• /
• 2003

This paper newly proposes a mesh regularization method for the enhancement of the efficiency in sheet metal forming analysis. The regularization method searches for distorted elements with appropriate searching criteria and constructs patches including the elements to be modified. Each patch is then extended to a three-dimensional surface in order to obtain the information of the continuous coordinates. In constructing the surface enclosing each patch, NURBS(Non-Uniform Rational B-Spline) surface is employed to describe a three-dimensional free surface. On the basis of the constructed surface, each node is properly arranged to form unit elements as close as to a square. The state variables calculated from its original mesh geometry are mapped into the new mesh geometry for the next stage or incremental step of a forming analysis. The analysis results with the proposed method are compared to the results from the direct forming analysis without mesh regularization in order to confirm the validity of the method.