• Korean Journal of Food Science and Technology
• /
• v.9 no.2
• /
• pp.123-130
• /
• 1977

A laboratory study was made to develop a simple and economic model method for the systematic determination of functional properties of 'Soy Protein Isolates (SPI)' prepared from defatted soybean meal. These are required to evaluate and to predict how SPI may behave in specific systems and such proteins can be used to simulate or replace conventional proteins. Data concerning the effects of pH, salt concentration, temperature, and protein concentration on the functional properties which include solubility, heat denaturation, gel forming capacity, emulsifying capacity, and foaming capacity are presented. The results are as follows: 1) The yield of SPI from defatted soybean meal increased to 83.9 % as the soybean meal was extracted with 0.02 N NaOH. 2) The suitable viscocity of a dope solution for spinning fiber was found to be 60 Poises by using syringe needle (0.3 mm) with 15 % SPI in 0.6 % NaOH. 3) Heat caused thickening and gelation in concentration of 8 % with a temperature threshold of $70^{\circ}C$. At $8{\sim}12\;%$ protein concentration, gel was formed within $10{\sim}30\;min$ at $70{\sim}100\;^{\circ}C$. It was, however, disrupted rapidly at $125\;^{\circ}C$ of overheat treatment. The gel was firm, resilient and self-supporting at protein concentration of 14 % and less susceptible to disruption of overheating. 4) The emulsifying capacity (EC) of SPI was correlated positively to the solubility of protein at ${\mu}=0$. At pH of the isoelectric point of SPI (pH 4.6), EC increased as concentration of sodium chloride increased. Using model system$(mixing\;speed:\;12,000\;r.p.m.,\;oil\;addition\;rate:\;0.9\;ml/sec,\;and\;temperature\;:\;20{\pm}1\;^{\circ}C)$, the maximum EC of SPI was found to be 47.2 ml of oil/100 mg protein, at the condition of pH 8.7 and ${\mu}=0.6$. The milk casein had greater EC than SPI at lower ionic strength while the EC of SPI was the same as milk casein at higher ionic strength. 5) The shaking test was used in determining the foam-ability of proteins. Progressively increasing SPI concentration up to 5 % indicated that the maximum protein concentration for foaming capacity was 2 %. Sucrose reduced foam expansion slightly but enhanced foam stability. The results of comparing milk casein and egg albumin were that foaming properties of SPI were the same as egg albumin, and better than milk casein, particularly in foam stability.

• Analytical Science and Technology
• /
• v.24 no.3
• /
• pp.173-182
• /
• 2011

This research examined prostanozol and its metabolites in urine of women who took the medicine (prostanozol). Prostanozol and its metabolites were successfully separated and detected by using LC/ESI/MS and GC/TOF-MS. Mass spectrum of LC/ESI/MS estimated molecular weight of Prostanozol and its metabolites and that of GC/TOF-MS verified them. For M1, carbon number 17 of Prostanozol substituted to a keto group and it is called 17-keto-Prostanozol. M2 turned out to be hydroxy-17-keto-Prostanozol. It came from substitution of one hydroxyl group of pyrazole nucleus and A-ring of M1. Substitution of one hydroxyl group of B-ring or C-ring became M3, hydroxy-17-keto-Prostanozol. M4 was found to be a hydroxy-17-keto-Prostsnozol transposed from one hydroxyl group to a D-ring. M5 has a hydroxyl group of carbon number 17. One hydroxyl group is substituted from B-ring or C-ring and it is assumed to be hydroxy-17-hydroxy-Prostanozol. M6 was turned out to be dihydroxy-17-keto-Prostanozol transposed from one hydroxyl group to pyrazole nucleus or A-ring and to B-ring or C-ring. Like M6, M7 has a keto group at carbon number 17 and was identified as dihydroxy-17-keto-Prostanozol. M7 has one hydroxyl group at pyrazole nucleus or A-ring and also at D-ring. At last M8 was found to be dihydroxy-17-hydroxy-Prostanozol. Pyrazole nucleus or A-ring has got one hydroxyl group and other rings were substituted to another hydroxyl group. From above, M5, M7 and M8 were verified as new metabolites that were not discovered yet. Prostanozol and all of the 8 metabolites formed glucuronic conjugates as a result of conjugation reaction test in human body. Some of 8 metabolites were excreted without forming conjugates. Particularly M6 and M7 were excreted as sulfate conjugates.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1097-1106
• /
• 1998

Biodegradable edible films were prepared from rice protein concentrates (RPC) made from rice wine meal by alkaline extraction and isoelectric precipitation. The effect of film forming solution pH and plasticizers were studied, and cross-linkers were added to improve mechanical properties and water vapor permeabilities (WVP) of films. Films could be formed within pH $8{\sim}11$ with tensile strength (TS) of 4.3{\sim}5.7\;MPa$. Films produced under pH 11 had the highest TS (5.7 MPa) and the lowest WVP $(0.44\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa)$. Added glycerol, polyethylene glycol 200 (PEG) and its mixture (GLY:PEG=50:50) as plasticizers also affected the mechanical properties and WVP of films. TS and elongation at break (E) of films at various plasticizer levels were $5.5{\sim}1.0\;MPa$ and $3.6{\sim}24.3%$, respectively. At the same plasticizer concentration, the highest TS was observed when glycerol was used whereas the highest E was measured when mixture was used as plasticizer. WVPs of films with thickness of $60\;{\mu}m$ were $0.39{\sim}0.54\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$. WVP of films decreased as the ratio of glycerol/PEG 200 was decreased, and WVP increased as the total amount of plasticizer added to the films increased. Film strength was improved by the addition of small amount of sodium hydrogen sulfate, succinic anhydride, ascorbic acid and citric acid, whereas TS of films containing $0.5{\sim}2.0%$ of NaCl and $CaCl_2$ were lower than those without the salts. The highest TS (6.3 MPa) was achieved with films containing 0.1% of succinic anhydride.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.07b
• /
• pp.37-54
• /
• 2003

It has been recognized that the hen. like its mammalian counterparts. provides young chicks with antibodies as protection against hostile invaders. This system facilitates the transfer of specific antibodies from serum to egg yolk. and provides a supply of antibodies called immunoglobulin Y(IgY) to the developing embryo and the hatched chick. The protection against pathogens that the relatively immuno-incompetent newly hatched chick has. is through transmission of antibodies from the mother via the egg. Egg yolk. therefore. can be loaded with a large amount of IgY against pathogens which can immobilize the existing or invading pathogens during the embryo development or in day-old chicks. Thus. the immunization of laying hens to various pathogens results in production of different antigen-specific IgY in eggs. Egg yolk contains 8~20 mg of immunoglobulins (IgY) per $m\ell$ or 136~340 mg per yolk suggesting that more than 30 g of IgY can be obtained from one immunized hen in a year. By immunizing laying hens with antigens and collecting IgY from egg yolk. low cost antibodies at less than ＄10 per g compared to more than ＄20.000 per g of mammalian IgG can be obtained. This IgY technology opens new potential market applications in medicine. public health veterinary medicine and food safety. A broader use of IgY technology could be applied as biological or diagnostic tool. nut-raceutical or functional food development. oral-supplementation for prophylaxis. and as pathogen-specific antimicrobial agents for infectious disease control. This paper has emphasized that when IgY-loaded chicken eggs are produced and consumed. the specific antibody binds. immobilizes and consequently reduces or inhibits the growth or colony forming abilities of microbial pathogens. This concept could serve as an alternative agent to replace the use of antibiotics. since today. more and more antibiotics are less effective in the treatment of infections. due to the emergence of drug-resistant bacteria.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.188-196
• /
• 1995

To obtain useful mould strain in soybean fermentation industry, we collected conventional Meju all over the Korea and tested existance of aflatoxin in Meju collected. Also, we measured distribution of microorganism and enzyme activity of Meju and isolated Aspergillus oryzae O4-5 as a industrially useful mould. The results obtained were summarized as follows: 1. Aflatoxin was not detected by EZ-Screen Test Kit and HPLC analysis in various Meju sample collected all over the Korea from 1994.12 to 1995.2. 2. Colony forming units(CFU) of mould, yeasts, aerobe, and anaerobe were $1.3{\times}10^4-2.8{\times}10^6$, $1{\times}10^2-1.5{\times}0^6$, $2.0{\times}10^7-8.0{\times}10^8$ and $3.0{\times}10^6-7.3{\times}10^8$ per gram of Meju, respectively, indicating that CFU inter Meju samples were varied with big difference. 3. The activities of ${\alpha}$-amylase and gluco-amylase were 5-80 units and 2-34 units per g of Meju, respectively. It was shown that enzyme activity was varied depending on where the Meju was collected. 4. The activities of acidic, neutral and alkaline protease were 5-33 units, 5-302 units and 5-363 units per g of Meju, respectively. Acidic protease of Improved Meju made by D-Company was higher than that of conventional Meju as 66 units per g of Meju. 5. CNU O4-5 strain selected as a noble strain could produce amylase and protease in high level, and identified as a strain that belongs to Aspergillus oryzae. 6. The activities of acidic and neutral protease of Aspergillus oryzae CNU O4-5 strain isolated were about 10% higher than those of Aspergillus oryzae JM which has been used in soybean fermentation industry. Amylase activity of CNU O4-5 strain was similar to Aspergillus oryzae JM.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.441-447
• /
• 2012

Purpose: This paper is about development and design of the 1x optical path relay adapter for the beam splitting prism by us the day & night scope. Methods: To product the day & night scope by using the beam splitting prism and the commercial zoom optical system with the C-mount lens barrel structure, the optical path relay adapter, which doesn't change the image size of the zoom optical system and can stretch the position of the image-forming surface, is needed. We could design the 1x optical path relay adapter by using the CodeV program in which the Lens Module mode is offered. Results: We could design the optical path relay adapter used in the day&night scope with the beam splitting prism, of which characteristics have the EFL of -56.0 mm, the magnification of +1.0x, the distance from the 1st lens surface to the last lens surface of about 20.4 mm. The resolution of this system is characterized by 30 lp/mm at 40% MTF. This is enough to accommodate the designed optical path relay adapter can overcome the resolution of the 3rd generation of image intesifier tubes. Conclusions: By designing and applying the optical path relay adapter of which optical characteristics have the EFL of -56.0 mm, the magnification of +1.0x, the distance from the 1st lens surface to the last lens surface of about 20.4 mm, and the resolution of 30 lp/mm at 40% MTF, we could develop the new type day&night scope consisting of the beam splitting, the commercial zoom optical system with the C-mount lens barrel structure, and the 3rd generation of image intesifier tubes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.36-48
• /
• 2018

This study surveyed 599 elementary schools in Seoul to provide measures for the quantitative expansion and sustainable operation of environmentally-friendly school garden. Of all schools, 161 schools had formed and were operating school gardens. The total area of school gardens was $166,901m^2$ and the mean area was $131.2m^2$ in elementary, junior high and high schools in Seoul. Meanwhile, the total area of school gardens was $65,493m^2$ and the mean area was $363m^2$ in 161 schools that participated in the survey, indicating $1.15m^2$ per student. Of these schools, 11.8% were operating gardens themselves, while 50.3% were operating gardens that had been newly renovated or environmentally improved by institutional support projects after initially managing gardens themselves. According to the locations of school gardens, mixed-type gardening (a combination of school gardening and container vegetable gardening) accounted for 34.8%, followed by school gardening at 32.9%, container vegetable gardening at 29.2%, and suburb community gardening at 3.1%. Those in charge of garden operations were teachers at 51.6%, comprising the largest percentage. Facilities built when forming the garden included storage facilities for small-scale greenhouses and farming equipment at 26.1%, accounting for the largest percentage. No additional facilities constructed accounted for 21.7%. The greatest difficulty in operating gardens was garden management at 34.2%. The most needed elements for the sustainable operation of gardens were improvement in physical environment and the need for hiring a paid garden, each accounting for 32%. The most important purpose for school gardening was creating educational environments (81.6%). The major source for gaining information on garden management was consultation from acquaintances (67.8%). Schools that utilize plant waste from gardens as natural fertilizers accounted for 45.8% of all schools. Responses to the impact of operating school gardens for educational purpose were positive in all schools as 'very effective' in 63.2% and 'effective' in 36.8%. This study was meaningful in that it intended to identify the current status of the operation of school gardens in elementary schools in Seoul, support the formation of school gardens appropriate for each school with sustainable operation measures, implement a high-quality education program, develop teaching materials, expand job training opportunities for teachers in charge, devise measures to support specialized instructors, and propose the need for a garden management organization.

• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.43-48
• /
• 2005

An experiment was conducted to investigate the effects of mineral extract from granite on the performance, ammonia production from the litter, components of blood, Newcastle Disease (ND) titer and intestinal microflora in broiler chickens. Nine hundred sixty one-day-old broiler chickens (Ross) were assigned to five treatments: C; control, Zeolite; control + zeolite 1$\%$, AM10: control + active mineral water $10\%$ adsorbed zeolite $1\%$, AM20; control + active mineral water $20\%$ adsorbed zeolite $1\%$ and AM30; control + active mineral water $30\%$ adsorbed zeolite $1\%$. Each treatment consisted of four replicates with 48 broiler chicks for feeding trial. In order to test the effect of ND vaccine on the components of blood, ND titer and intestinal microflora, a separate group of 48 broiler chicks were assigned to the same 5 treatment as the feeding trial plus one negative control (No ND vaccine). Weight gain, feed intake, feed conversion and mortality were not significantly affected by dietary treatments but AM30 tended to be higher than other treatments in weight gain and feed intake, especially during later period (4 to 5 weeks of age). Ammonia production from the litter of AM30 treatment was significantly (P<0.01) lower than the control. Components of blood and ND titer in serum of broiler chickens were not significantly affected by treatments but MCHC (mean corpuscular hemoglobin concentration) of blood was significantly lower (P<0.05) in Zeolite treatment compared to others. The colony forming unit (CFU) of Clostridium perfringens in the small intestinal content of all zeolite and AM treated groups was significantly (P<0.01) lower than the control while the CFU of Escherichia coli was not significantly affected. The CFU of Lactobacilli in AM30 treatment was significantly (P<0.05) higher than the control. In conclusion, dietary supplement of active mineral water adsorbed to zeolite at $30\%$ level (AM30) tended to improve growth performance of broiler chickens and significantly reduced ammonia production from the litter. It also significantly increased CFU of intestinal Lactobacilli.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.143-152
• /
• 2019

This paper presents two new techniques for solving the two problems of the water curtain: 'shape distortion' caused by gravity and 'resolution degradation' caused by fine satellite droplets around the shape. In the first method, when the user converts a three-dimensional model to a vertical sequence of slices, the slices are evenly spaced. The method is to adjust the time points at which the equi-distance slices are created by the nozzle array. In this method, even if the velocity of a water drop increases with time by gravity, the water drop slices maintain the equal interval at the moment of forming the whole shape, thereby preventing distortion. The second method is called the minimum time interval technique. The minimum time interval is the time between the open command of a nozzle and the next open command of the nozzle, so that consecutive water drops are clearly created without satellite drops. When the user converts a three-dimensional model to a sequence of slices, the slices are defined as close as possible, not evenly spaced, considering the minimum time interval of consecutive drops. The slices are arranged in short intervals in the top area of the shape, and the slices are arranged in long intervals in the bottom area of the shape. The minimum time interval is pre-determined by an experiment, and consists of the time from the open command of the nozzle to the time at which the nozzle is fully open, and the time in which the fully open state is maintained, and the time from the close command to the time at which the nozzle is fully closed. The second method produces water drop sculptures with higher resolution than does the first method.

• The Korean Journal of Petroleum Geology
• /
• v.8 no.1_2 s.9
• /
• pp.1-43
• /
• 2000

A comparison study for understanding a stratigraphic response to tectonic evolution of sedimentary basins in the Yellow Sea and adjacent areas was carried out by using an integrated stratigraphic technology. As an interim result, we propose a stratigraphic framework that allows temporal and spatial correlation of the sedimentary successions in the basins. This stratigraphic framework will use as a new stratigraphic paradigm for hydrocarbon exploration in the Yellow Sea and adjacent areas. Integrated stratigraphic analysis in conjunction with sequence-keyed biostratigraphy allows us to define nine stratigraphic units in the basins: Cambro-Ordovician, Carboniferous-Triassic, early to middle Jurassic, late Jurassic-early Cretaceous, late Cretaceous, Paleocene-Eocene, Oligocene, early Miocene, and middle Miocene-Pliocene. They are tectono-stratigraphic units that provide time-sliced information on basin-forming tectonics, sedimentation, and basin-modifying tectonics of sedimentary basins in the Yellow Sea and adjacent area. In the Paleozoic, the South Yellow Sea basin was initiated as a marginal sag basin in the northern margin of the South China Block. Siliciclastic and carbonate sediments were deposited in the basin, showing cyclic fashions due to relative sea-level fluctuations. During the Devonian, however, the basin was once uplifted and deformed due to the Caledonian Orogeny, which resulted in an unconformity between the Cambro-Ordovician and the Carboniferous-Triassic units. The second orogenic event, Indosinian Orogeny, occurred in the late Permian-late Triassic, when the North China block began to collide with the South China block. Collision of the North and South China blocks produced the Qinling-Dabie-Sulu-Imjin foldbelts and led to the uplift and deformation of the Paleozoic strata. Subsequent rapid subsidence of the foreland parallel to the foldbelts formed the Bohai and the West Korean Bay basins where infilled with the early to middle Jurassic molasse sediments. Also Piggyback basins locally developed along the thrust. The later intensive Yanshanian (first) Orogeny modified these foreland and Piggyback basins in the late Jurassic. The South Yellow Sea basin, however, was likely to be a continental interior sag basin during the early to middle Jurassic. The early to middle Jurassic unit in the South Yellow Sea basin is characterized by fluvial to lacustrine sandstone and shale with a thick basal quartz conglomerate that contains well-sorted and well-rounded gravels. Meanwhile, the Tan-Lu fault system underwent a sinistrai strike-slip wrench movement in the late Triassic and continued into the Jurassic and Cretaceous until the early Tertiary. In the late Jurassic, development of second- or third-order wrench faults along the Tan-Lu fault system probably initiated a series of small-scale strike-slip extensional basins. Continued sinistral movement of the Tan-Lu fault until the late Eocene caused a megashear in the South Yellow Sea basin, forming a large-scale pull-apart basin. However, the Bohai basin was uplifted and severely modified during this period. h pronounced Yanshanian Orogeny (second and third) was marked by the unconformity between the early Cretaceous and late Eocene in the Bohai basin. In the late Eocene, the Indian Plate began to collide with the Eurasian Plate, forming a megasuture zone. This orogenic event, namely the Himalayan Orogeny, was probably responsible for the change of motion of the Tan-Lu fault system from left-lateral to right-lateral. The right-lateral strike-slip movement of the Tan-Lu fault caused the tectonic inversion of the South Yellow Sea basin and the pull-apart opening of the Bohai basin. Thus, the Oligocene was the main period of sedimentation in the Bohai basin as well as severe tectonic modification of the South Yellow Sea basin. After the Oligocene, the Yellow Sea and Bohai basins have maintained thermal subsidence up to the present with short periods of marine transgressions extending into the land part of the present basins.