• Science of Emotion and Sensibility
• /
• v.12 no.3
• /
• pp.289-298
• /
• 2009

An analysis was carried out for this study to figure out if there exists any differences in the model consumers accept for commercialized MP3-playing clothing and bio-signal sensing clothing. To analyze the differences of the structural variables of the products types, t-test was conducted with SPSS 15.0 package and multi-group analysis with AMOS 5.0 to find out the differences of each path goes with product types in structural equation model. In analytical results of effective sample of 557 copies of questionnaire, consumers' were highly aware of MP3-playing clothing in perceived ease of use, while they were aware relatively high of bio-signal sensing clothing in perceived usefulness, attitudes, consumer acceptance. The perceived value which was input to find out consumers awareness about sale price of commercialized products, was proven to do very important moderating role in forming consumers' attitudes and acceptance intention. Besides, consumers showed a difference in path in accepting model goes with product types. In bio-signal sensing clothing case, 'the perceived usefulness$\rightarrow$attitudes' path which was backed up in MP3-playing clothing was rejected, and 'perceived value$\rightarrow$attitudes' path appeared relatively high with moderating role of perceived value higher than MP3-playing clothing. Considering the results above, as the smart clothing is in the initiative commercialization stage while consumers were in the inquiry stage into awareness or information necessary in the course of purchase decision-making, and so an effective commercialization strategy seems to be necessary.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.286-287
• /
• 2012

Reset-first resistive switching mechanism based on reduction reaction in HfO2-x with oxygen drift-diffusion was studied. we first report that the indirect evidence of local filamentary conductive path formation in bulk HfO2 film with local TiOx region at Ti top electrode formed during forming process and presence of anion-migration at interface between electrode and HfO2 during resistive switching through high resolution transmission electron microscopy (HRTEM), electron disperse x-ray (EDX), and electron energy loss spectroscopy (EELS) mapping. Based on forming process mechanism, we expected that redox reaction from Ti/HfO2 to TiOx/HfO2-x was responsible for an increase of initial current with increasing the post-annealing process. First-reset resistive switching in above $350^{\circ}C$ annealed Ti/HfO2 film was exhibited and the redox phenomenon from Ti/HfO2 to TiOx/HfO2-x was observed with high angle annular dark field (HAADF) - scanning transmission electron microscopy (STEM), EDX and x-ray photoelectron spectroscopy. Therefore, we demonstrated that the migration of oxygen ions at interface region under external electrical bias contributed to bipolar resistive switching behavior.

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.212-219
• /
• 2013

This study uses a fashion shop facade design to track human gaze, find gaze frequency for gaze time for the gaze points along the path of sight, and expose the importance of facade design and figure out the value through theoretical systematization. Thus, this study employed the measurement method in physiological psychology which is sight-tracking device with eye-tracking to perform effective data evaluation. To find gaze frequency and study the contents to reflect on the facade, precedent study review, and case study of facade design to collect stimulants to be used in eye-tracking experiment were executed. And the eye-tracking experiment which traces the movement of eye[pupil] was performed. As the result of analyzing gaze frequency, The characteristics of such gaze path formation made the characteristics for gaze frequency even clearer. What was characteristic in the analysis result according to 'average value for gaze time' was that only 8 out of 2000 areas showed over 1 second of frequency and, and all other shoed less than 1 second of gaze time. This indicates that human sight endlessly jumps around, and that it 'Stay' where it has interest. This study found the average of the frequency of this 'Stay' in facade design. This study well presents the major points to add value to the design of the space of facade based on scientific measurement/analysis data obtained through visual understanding. Through such, this study is thought to be able to have a positive interaction with marketing by forming a theoretical background bringing utility to purchase environment and assisting in sales increase.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.69-70
• /
• 1997

Polyimides and related polymers, when synthesized from aromatic monomers, have generally rigid chain structures resulting in a low gas permeability. The rigidity of polymer chains reduces the segmental motion of chains and works as a good barrier against gas transport. To overcome the limit of use as materials of gas separation membranes due to low gas permeability, block copolymers with the incorporation of flexible segments like siloxane linkage and ether linkage have been studied. These block copolymers have microphase-separated structures composed of microdomains of flexible poly(dimethylsiloxane) or polyether segments and of rigid polyimides segments. In case of rigid-flexible block copolymers, the characteristics of both phases for gas permeation are of great difference. The permeation of gas molecules occurs favorably through microdomains of flexible segments, whereas those of rigid segments hinder the permeation of gas molecules. Accordingly the increase of content of flexible segments in a rigid polymer matrix will increase the gas permeability of the membrane linearly. However, this prediction does not satisfy enough many experimental results and in particular the drastic increase of the permeability is observed in a certain volume fraction. It was proposed that the gas transport mechanism is dominated by diffusion rather than gas solubility in a certain content of flexible phase if solution-diffusion mechanism is adopted. However, the transition from solubility-dependent to diffusion-dependent cannot be explained by the understanding of mechanism itself. Therefore, we consider an effective chemical path which permeable phase can form in a microheterogenous medium, and percolation concept is introduced to describe the permeability transition at near threshold where for the first time a percolation path occurs. The volume fraction of both phases is defined as V$_{\alpha}$ and V$_{\beta}$ in block copolymers, and the volume of $\beta$ phase in the threshold forming geometrically a traversing channel is defined as V$_{\betac}$. The formation mechanism of shortest chemical channel is schematically depicted in Fig. 1.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.504-511
• /
• 2016

In this paper, the method is proposed that the equivalent result can be obtained by compensating the variation of gain and phase in the comparison with the result of near-field measurement which is obtained in the steady state, although the gain and phase variation of rx-channels occurred in the near-field rx-measurement of digital active phased array antenna. The proposed concept has the time section for monitoring the state of the rx-channels through the calibration path in the measurement timeline, and is the method for compensating the variation of state. For validating the proposed method, the fabricated X-band digital active phased array antenna and the planar near-field measurement facility is utilized. The proposed method is validated in the comparison with the compensated pattern which the unstable state of rx-channels is calibrated and the reference pattern obtained under the steady state of the rx-channels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1373-1379
• /
• 2012

The interaction of magnetic field in the frequency range of 9~150 kHz radiating from a railway system with wireless systems has been the cause of radio frequency interference. In this paper, the equivalent circuit model of the RFI noise is proposed through source and transfer path analysis, and it is confirmed that the switching noise of several kHz that occurs a vehicle traction drive system and a substation is radiated by forming the loop circuit with a feeder line by a rolling stock. And the validity of the proposed equivalent circuit model is verified by analyzing the effects of RC banks installed in the real railway between Guri and Guksu stations, the RFI noise can be effectively mitigated by loading suitable capacitance between rail and feeding line.

• Journal of the Korean Society of Costume
• /
• v.58 no.3
• /
• pp.34-48
• /
• 2008

Modern fashion market is being developed by emotional values rather than rational idea of customers. Experiential marketing is an effective marketing strategy for fashion marketplace because customers tend to consider fashion shopping as an enjoyable experience. Among the fashion markets, the fashion stores for middle.old aged women that have various points of contacts could be appropriate place where emotional and relational marketing strategies would be applied to. The effects of the procedure "emotional and relational experience$\rightarrow$commitments$\rightarrow$long-term relationship orientation" that fashion customers are experiencing, by forming a path model, two types of experiential effects from emotion and relation were examined. It was found that fashion emotional and relational experiences were important factors because these factors affected a long-term relationship orientation. The findings of the study provide marketing strategy that enables to promote a consistent relationship between fashion stores and customers. Furthermore, this study will contribute to the criteria for segmentation of middle and old aged women's fashion market who have own desire for fashion emotional and relational experience.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.116-125
• /
• 2006

MEMS and LIGA technologies have been used for fabricating microstructures, but their shape is not 3D because of difficulty for preparation of many masks. To fabricate 3D microstructures, microstereolithography technology based on Digital Micromirror Device($DMD^{TM}$) was introduced. It has no need of masks and is capable of fabricating high aspect ratio microstructures. In this technology, STL file is the standard format as the same of conventional rapid prototyping system, and 3D parts are fabricated by layer-by-layer according to 2D section sliced from STL file. The UV light source is illuminated to DMD which makes bitmap images of 2D section, and they are transferred and focused on resin surface. In this paper, we addressed optical design of microstereolithography system in consideration of light path according to DMD operation and image-forming on the resin surface using optical design program. To verify the performance of implemented microstereolithography system, 3D microstructures with complexity and high aspect ratio were fabricated.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.1
• /
• pp.3-7
• /
• 2009

Variation in oxidation behavior with heat treatment temperature is investigated for a Ni-Ti alloy using X-ray diffraction, DSC (differential scanning calorimetry) and Auger electron spectroscopy. And the effect of oxidation on transformation behavior and superelasticity is characterized. A cold-worked 50.6Ni-Ti alloy is oxidized at 300-$700^{\circ}C$ for 1 hr in the air atmosphere. With an increase in heating temperature, the structure of $TiO_2$ changes from amorphous (300 and $400^{\circ}C$) to anatase ($500^{\circ}C$), and to rutile ($700^{\circ}C$). Activation energy of oxidation for NiTi is measured to be 51 Kcal/mol when heating temperature is $500^{\circ}C$ or above. Since Ti reacts preferably with oxygen, Ni content increases between matrix and oxide, forming $Ni_{3}Ti$ compounds. The resultant of oxidation decreases significantly $M_s$ and $A_s$ temperature in the specimen oxidized at $900^{\circ}C$ with $B_2{\rightarrow}M$ transformation path. An extra is found on cooling between two peaks in the specimen with $B_2{\rightarrow}R{\rightarrow}M$ one which is oxidized at $900^{\circ}C$ and aged at $500^{\circ}C$. Oxidation deteriorates superelasticity due to formation of Ni-rich compound.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.3
• /
• pp.93-115
• /
• 2014

In collaborative product development with multiple suppliers, buyers must manage the suppliers' activities. This empirical research investigates the performance impacts of three strategies that buyers use to manage suppliers who design interdependent components. These strategies are: Instructionism (giving clear instructions to suppliers), Teaming (forming an interactive development team with suppliers), and Delegation (transferring component development responsibilities to suppliers). Data were collected through a cross-industry web-based survey of buying firms in manufacturing industries whose products require multiple, interdependent components. A path analysis utilizing 318 survey responses indicates that Instructionism has a positive effect on design quality, and Teaming has a positive effect on design quality and component innovation. The use of Delegation is not related to any of the performance indicators. The practical implication of this research for product development managers is that both Instructionism and Teaming can be effective strategies. For the purpose of assuring design quality, a buyer should give clear instructions in detailed specifications or work closely with suppliers in development teams. If competitive priority is product innovativeness, however, the buyer should work closely with its suppliers during component development processes using a Teaming strategy.