• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.3
• /
• pp.30-39
• /
• 1986

The burr worsens the accuracy of a workpiece and decreases a lot of pro- ductivity because it takes so much time and efforts to remove it. In this paper, the height, thickness and size of a drilling burr were derived from the drilling variables of drill diameter, chisel edge angle, web rate =($\Frac{2{\times}\;web\;thickness}{drill\;dia}$) and yielding stress of the workpiece as wel as feed, point angle and helix angle. The theoretical and experimental values of drilling thrust, torque and burr size of the testpiece were analyzed with the method of numerical analysis in a standard drilling condition. The order of choosing the drilling variables for the purpose of controlling the burr size was dealt in this paper with burr forming ratio. The results are as follows: (1) The drill diameter forms 42 percents feed 25 percents point angle 23 percents and web rate, chisel edge angle and gelix angle 5 percents of the partial differential slope of drilling thrust within the usual available ranges of drilling variables. (2) The drill diameter forms 55 percents feed 26 percents web rate 9 percents and chisel edge angle, point angle and helix angle 10 percents of the par- tial differential slope of drilling torque in the usual available ranges of drilling variables. (3) About 70 percents of the burr size can be controlled by feed, 29 percents by web rate in the case of a fixed diameter. It is recommended drilling10 variables to be chosen in the order of feed, web rate, drill diameter, point angle, chisel edge angle and helix angle so as to control the burr size effectively.

• Journal of Animal Science and Technology
• /
• v.57 no.1
• /
• pp.4.1-4.5
• /
• 2015

The study was performed to investigate the effect of dietary supplementation of a lipid-encapsulated Zinc oxide on growth parameters and intestinal mucosal morphology piglets born to Duroc-sired Landrace ${\times}$ Yorkshire dams. Twenty-four 30-day-old piglets weaned at 25 days of age were orally challenged with $5{\times}10^8$ colony forming units of enterotoxigenic Escherichia coli (ETEC) K88 and fed one of the four diets for 7 days: (i) a nursery basal diet containing 100-ppm ZnO (referred to as BASAL), (ii) BASAL supplemented with 120-ppm apramycin (referred to as ANTIBIO), (iii) BASAL with 2,400-ppm ZnO (referred to as HIGH), and BASAL containing 100-ppm lipid-encapsulated ZnO (referred to as LE). All piglets were killed at the end of the experiment for histological examination on the intestine. The results showed that the average daily gain (ADG), the villus height: crypt depth (CD) ratio in the ileum, and the goblet cell density of the villus and crypt in the duodenum, jejunum, and colon were greater in the LE-fed group that those of the BASAL (p < 0.05). Fecal consistency score (FCS) and the CD ratio in the ileum were less in the LE-fed group, compared to the BASAL-fed one (p < 0.05). The effects observed in the LE-fed group were almost equal to those of the HIGH-fed group as well as even superior to those of the ANTIBIO-fed group. Taken together, our results imply that dietary supplementation of 100-ppm lipid-encapsulated ZnO is as effective as that of 2,400-ppm ZnO for promoting growth diarrhea and intestinal morphology caused by ETEC infection.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1030-1034
• /
• 2005

The purpose of this study was to clarify the penetration behavior of particulate matters by wave and tidal actions in sandy beach located in enclosed bay and to evaluate the effect of stranded oil on penetration of particulate matters. Experiments were rallied out using a model sandy beach facility. The particulate matters penetrated into saturated sediments by wave action from breaking wave run-up point with a semi-circular forming in low energy beach as enclosed bay. On the other hand, the penetration velocity of the particulate matters was to be faster according to the increase of slope and breaking wave height. The particulate matters by tidal action penetrated into the sediments at an angie of 45 degrees in the direction of porous water flow. The stranded oil completely blocked the penetration of the particulate matters into the sediments. These results indicate that the penetrated oil prevents the penetration of the particulate matters into the sediments and, therefore, results in the reduction in the supply of plankton, bacteria and organic detritus for the benthic organisms in the sandy beach.

• Journal of Trauma and Injury
• /
• v.28 no.4
• /
• pp.248-255
• /
• 2015

Purpose: study of the mutual influence of the individual anatomical regions damage in patients associated with falls from heights. Methods: 561 medical reports of patients associated with falls from heights admitted to Republican Research Center of Emergency Medicine (RRCEM), in period of 2010-2013 yy, were analyzed retrospectively. Patient's age range was from 15 to 89. Treatment of these patients held in three stages: period of acute disorders of vital functions; relative stabilization period; stabilization of vital functions. The scope and content of medical diagnostic procedures performed on pre-hospital and intensive care stages. The severity of each injury was scored according to the AIS scale, the total severity of lesions was scored by points due to ISS. Digital material is treated by methods of mathematical statistics. Results: Falls from heights leads to associated injuries for 4 times more than isolated trauma, and increases according to height of fall and falling surface. Patients with TBI+chest trauma, are most serious contingent that has highest mortality and complications (36.8%). TBI+musculoskeletal system trauma are characterized by high blood loss, traumatic shock and fat embolism, forming a vicious circle. Conclusion: in patients associated with falls from heights clinical manifestations of injuries mutual aggravation syndrome will be seen. TBI leads to complication of chest trauma, delayed diagnostics of abdominal and chest trauma, aggravation of coma condition. Developing of high blood loss and fat embolism in musculoskeletal system trauma leads to shock and pulmonary embolism, which increases probability of death in the presence of abdominal or chest trauma, but abdominal trauma or chest trauma has no significant effect on the severity of the musculoskeletal system trauma.

• Journal of ILASS-Korea
• /
• v.11 no.2
• /
• pp.59-68
• /
• 2006

Experimental results of the metal powder production with internal mixing, internal impinging and the atomizer coupled with substrate design are presented in this paper. In a test with internal mixing atomizer, mean powder size was decreased from $37{\mu}m\;to\;23{\mu}m$ for Pb65Sn35 alloy as the gas-to-melt mass ratio was increased from 0.04 to 0.17. The particle size further reduces to $16.01{\mu}m$ as the orifice area is increased to $24mm^2$. The micrograph of the metal powder indicates that very fine and spherical metal powder has been produced by this process. In a test program using the internal impinging atomizers, the mean particle size of the metal powder was decreased from $22{\mu}m\;to\;12{\mu}m$ as the gas-to-melt-mass ratio increased from 0.05 to 0.22. The test results of an atomizer coupled with a substrate indicates that the deposition rate of the molten spray on the substrate is controlled by the diameter of the substrate, the height of the substrate ring and the distance of the substrate from the outlet of the atomizer. This in rum determines the powder production rate of the spraying processes. Experimental results indicate that the deposition rate of the spray forming material decreases as the distance between the substrate and the atomizer increases. For example, the deposition rate decreases from 48% to 19% as the substrate is placed at a distance from 20cm to 40cm. On the other hand, the metal powder production rate and its particle size increases as the subsrate is placed far away from the atomizer. The production of metal powder with mean particle size as low as $3.13{\mu}m$ has been achieved, a level which is not achievable by the conventional gas atomization processes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.126-131
• /
• 1990

Sixty two Job's Tear cultivars were largely classified into ten varietal groups and every varieties. except for Group V forming the Group by one variety. uniformly formed the Groups. From Group I to Group Ⅹ respectively contained three(5%), eighteen(29%), five(8%), thirteen(21%), one(2%), five(8%), seven(11%), four(7%), two(3%) and four(7%) varieties. Group II and Group IV showed considerably large variation whereas Group Ⅷ, IV and Ⅹ showed low variation and inferiority in vigorosity and yield components. Most of the varietal Group were not associated with their geographical origin. Days to flowering and plant height among the nine characters were the largest contributors to the D$^2$ in both inter- and inter groups.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.309-309
• /
• 2017

The experiments were carried out in open experimental field of Field Crops Research Institute, Hai Duong, Vietnam in Winter Spring seasons 2015-2016 and 2016-2017 for finding high yielding of Korean chipping potato varieties which are adaptable to Vietnam condition. Six varieties of Korean potato (G1, G2, G4, G10, B1, B2) were experimented. The control variety (G6) was Atlantic which has long been a standard chip variety. The results showed that, for a hill, there was positive correlation between number of stems and number of tubers. The hill yield also showed highly relation to the plant height and number of tubers. Even though the growth and yield of potatoes grown in the season 2016-2017 were significant higher than these of potatoes grown in the season 2015-2016, their percentages of tubers infected by scab disease were much higher. This is probably because of irregular soil moisture content at the tuber forming duration. While G1, G6 and B1 are white flesh varieties, the remaining are yellow flesh varieties. There are two shapes types among experimented varieties: oblong (G1, G10, B1) and round shape (G2, G4, G6, B2). The total yields of varieties G1, G2, B1, B2 were higher than the total yield of the control variety from 16.5-49.4% in the season 2015-2016 and from 39.8-75.6% in the season 2016-2017.

• Journal of architectural history
• /
• v.21 no.3
• /
• pp.73-92
• /
• 2012

This study mainly inquired characteristics and changes of 'Chang-aelgool' through 38 cases(with 161 Ssang-chang) of annex and pavillion buildings in Yeong-nam region which are built during the Chosun dynasty. The method of inquiry included actual survey of windows along with bibliographical research, and the results are as below. First, through the discovery of the term 'Chang-aelgool' as an indication of the window-forming frame in 'YeongGeonUiGwe'(1680 A.D), it is apparent that the term 'Chang-aelgool' was widely used in Korea from the late 17th century. Second, the 'Chang-aelgool' of study objects are classified into 4 categories. Type I and II are comprised of mitre-joints which cover the 4 corners of 'Chang-aelgool' and mainly used in building annex and pavillion buildings during the early period of the Chosun dynasty. Type III was widely used during the early and middle period of the Chosun dynasty and drastically dropped in number during the late period of the dynasty. Type IV is comprised of mitre-joint of the upper-half, tenon-jointing of the lower-half and widely used in annex and pavillion building during the late period of the Chosun dynasty. Third, the form of 'Chang-aelgool' has changed from rectangular form with longer width during the early period of Chosun dynasty to square form during the middle period and eventually ended up as a rectangular form with longer height during the late period of the dynasty. Fourth, it is considered that while mullion which is located in the center of 'Chang-aelgool' was mainly used around the main floored room during the early period of the Chosun dynasty, became commonly used in main floored room and 'ondol' rooms during the middle period and drastically dropped in number from then and ended up being not in use after the mid 18th century.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.40-45
• /
• 2018

This paper is an analysis of the influence of ceiling air conditioner airflow on fire detector response. In order to analyze the response characteristics of fire detector while forming air flow of a ceiling-type air conditioner, fire tests were carried out in accordance with ISO standard. This experiment was carried out in a fire test site of 10 m (width) ${\times}$ 7 m (length) ${\times}$ 4 m (height). As a result of the experiment, the response of fire detector shows a normal pattern that is delayed as the distance from the fire source is increased in the absence of the air conditioner, but it is confirmed that the pattern is not maintained in the strong air flow. When the air flow of air conditioner was strong, the response time was increased by 121% in the smoke detector and by 39% in the heat detector. In the case of ceiling type air conditioners, it is considered that the number of fire detectors should be increased, or a detector with high sensitivity should be installed for early detection of fire.