• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.9-15
• /
• 2006

To obtain realistic composite performance and availability measures, one should consider performance changes that are associated with failure recovery behavior. In this paper we address two modeling approaches, exact composite and approximate, and develop SRN models for these approaches. The former approach is to combine the performance and availability models and yields accurate results but generally faces largeness problem. To avoid the problem, the two level hierarchical model is developed. The upper level model describes the failure and repair behavior of the system and the lower level captures the pure performance aspect of the system, channel allocation and service. It models guard channel and preemptive handoff scheme. As numerical results, blocking and dropping probabilities are given for new call and handoff call, respectively.

• Journal of Korean Society of Disaster and Security
• /
• v.8 no.1
• /
• pp.5-13
• /
• 2015

In this study, the lateral overflow discharge coefficients for the curvatures of side weir on meandering channel were analyzed. The side weir installed in accordance with the variation of the radius of curvature of the central angle bends with $180^{\circ}$. FLOW-3D model is applied to calculate the discharge coefficients of the side-weir on meandering and straight channels and the characteristics of the discharge coefficients are analysed. In order to verify the numerical model, the results from the hydraulic experiment conducted by the former research are compared with the results simulated by FLOW-3D in the same conditions. The discharge coefficients are calculated for the ratio between curvature ($R_c$) and channel width (b), and the ratio between over flow discharge of the straight channel ($Q_{wc}$) and the meandering channel ($Q_{wc}$) are compared. As the result, the discharge coefficients depend on the weir depth on upstream, and the radius of curvature, so that the discharge coefficients of side weir on the meandering channel can be estimated by them on the straight channel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.78-85
• /
• 2011

In vehicle ad-hoc network (VANET) environments, traffic related information such as accident information, emergency information and real time traffic condition have to be delivered to on-board-unit (OBU) or/and road-side-equipment (RSE) for preventing traffic accidents in advance. In this paper, we introduce a Multi-Channel MAC (MCM) since the existing single channel operation may cause packet transmission delay and unexpected communication failure. To offer a seamless safety message transmission during the various services, it is necessary to manage the MAC scheduler in wireless access in vehicular environments (WAVE) systems. The MCM consists of MAC softwares and MAC hardwares where the former and the later ones are implemented with real time operation system based C language and FPGA module with VHDL language, respectively. The performance and QoS are verified by practical measurements and compared with the scheme using single channel operation.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.156-162
• /
• 2008

Cooperative relays can provide spatial diversity and improve performance of wireless communications. In this paper, we study subcarrier power allocation at the relays for orthogonal frequency division multiplexing (OFDM)-based wireless systems. For cooperative relay with amplify-and-forward (AF) and decode-and-forward (DF) algorithms, we investigate the impact of power allocation to the mutual information between the source and destination. From our simulation results on word~error-rate (WER) performance, we find that the DF algorithm with power allocation provides better performance than that of AF algorithm in a single path relay network because the former is able to eliminate channel noise at each relay. For the multiple path relay network, however, the network structure is already resistant to noise and channel distortion, and AF approach is a more attractive choice due to its lower complexity.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.13 no.1
• /
• pp.5-13
• /
• 1984

This analysis of numerical procedure is prediction of laminar flow and heat transfer at two dimension and steady flow in asymmetric sudden expansion channel. At former study, to analyse the flows with separation, the full Navier-Stokes equation is used, but there are many difficulties to analyse, and although significant progress has been made in the development of efficient computational methods for the Navier-Stokes equations, very large computation times are still required. In case of reward-facing flow, boundary-layer equation is used instead of full Navier-Stokes equation to analyse velocity fields, and result of this numerical analysis is good agreement with the given experimental study. In this case, since the computer time required for the boundary-layer calculation is an order of magnitude less than required for the solution of the full Navier-Stokes equation, this boundary-layer model provides a good approximate solution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1050-1057
• /
• 2008

Wireless Mesh Networks (WMNs) have recently become a hot issue to support high link capacity in wireless access networks. The IEEE 802. I 1 standard which is mainly used for the network interface technology in WMNs supports up to 3 or 12 multiple channels according to the IEEE 802.11 specification. However, two important problems must be addressed when we design a channel assigmnent algorithm: channel dependency problem and channel scanning delay. The former occurs when the dynamic channel switching of an interface leads to the channel switching of other interfaces to maintain node connectivity. The latter happens per channel switching of the interface, and affects the network performance. Therefore, in this paper, we propose the Distance-Based Channel Assigmnent (DB-CA) scheme for multi-channel WMNs to solve such problems. In DB-CA, nodes just perform channel switching without channel scanning to communicate with neighboring nodes that operate on different channels. Furthermore, DB-CA minimizes the interference of channels being used by nodes near the gateway in WMNs. Our simulation results show that DB-CA achieves improved performance in WMNs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.359-362
• /
• 2001

Analog communication systems using AM, FM modem have been developed. Digital communication systems using digital modems, which is by expansion of digital hardware skill have been recently developed. In order to accomplish a reliable communication it is important to overcome ocean environmental channel characteristics such as transmission loss, ambient noise and multipath effect etc. Specially, the effect of multipath is the most important element that determines the performance of underwater communication system in shallow water. Multipath channel can be divided a vertical and horizontal channel. the former is defined the channel to have large path-delay times between a direct wave and reflected waves. The latter shows relatively small path-delay times between a direct and reflected waves in compared with a vertical channel. In this paper, The performance of FSK, PSK and DPSK modem with respect to the vertical and horizontal multipath communication channels it described and compared.

• Journal of Distribution Research
• /
• v.3 no.1
• /
• pp.123-143
• /
• 1998

The aim of this paper is to investigate the women's apparel distribution channel in the well-known department stores located in the central Seoul area. Since the department store has its reputation, information and enormous buying power, it is the one of the major leading retails in the women's apparel industry. In doing so, the relationship between the channel members in terms of the level of dependence, power sources and perceived conflict and manifest conflict has been studied. Particularly, based on French and Raven's power sources, position source is added. It refers to a channel member's (Merchandizer in the department store) source over another based on the expection the former (Merchandizer in the department store) will be able to allocate the location and size of the store influencing the latter's sale and profit. The key informants are the merchandizers who work in the apparel companies contracting with major department stores. Finally, of the 284 questionnaires collected, 235 are usable. The hypotheses are tested through LISREL. The results of statistical analysis support that : Dependence has a positive effect on noncoercive bases of power. Coercive bases of power have a positive effect on manifest conflict as well as perceived conflict while noncoercive bases of power have a negative effect mainly on manifest conflict. Thus, the relation between the major department stores and the women's apparel companies in there seems to have bilateral dependence rather than highly unilateral dependence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.72-78
• /
• 2006

It is impossible to provide full diversity and full rate simultaneously using more than two transmit antennas in transmit diversity system. To do this, simple interference cancellation scheme and transmit power allocation scheme have been proposed, recently. But the former has increased noise power and the latter has increased interference which is induced by other channel in fading channel. In this paper, we propose an adaptive transmit power allocation algorithm to minimize the estimation error in the channel environments which have different fading levels each other and to improve the system performance.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2448-2453
• /
• 2008

The present study numerically investigates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib-height-to-hydraulic diameter ration (h/$D_h$) is 0.17; the rib pitch-to-height ratio (p/h) equals 2.8; the Reynolds number is 50,000. Shear stress transport (SST) turbulence model is used as a turbulence closure. The present results are compared with those for a continuous V-shaped rib. Computational results show that, for average heat transfer rate the staggered V-shaped rib gives about 2.5 times higher values than the continuous V-shaped rib, while, for the streamwise pressure drop the former gives about 5 times higher values than the latter. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered one gives about 2 times higher values than the continuous one. Also, for the staggered V-shaped rib, complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction, and more uniform heat transfer distributions are obtained.