• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.253-260
• /
• 2002

It is known that frost formation on surfaces of the heat exchanger seriously affects the performance of the refrigeration system. Accordingly, defrosting should follow, and effective defrosting is possible only when both analytic tools and comprehensive experimental data on frost formation are assailable. An experimental investigation was undertaken to characterize the effect of environmental parameters on frost formation on a horizontal cylinder in cross uniform flow. Several experiments were carried out with various environmental parameters such as inlet air temperature, inlet air humidity, air velocity and cooling surface temperature. Frost thickness, mass, surface temperature and cylinder inner and outer temperature were measured at front and rear positions of the cylinder. Thickness, mass, density, and effective thermal conductivity of the frost layer were obtained from measured data and effects of environmental parameters on the frost formation were analyzed. Data from experiments were correlated using dimensionless variables.

• Geomechanics and Engineering
• /
• 제19권6호
• /
• pp.523-532
• /
• 2019

Based on the formation characteristics, wellbore parameters and insulated tubing (IT) parameters of the Shengli oilfield, Shandong, China, a geomechanical model is built to predict the temperature distributions of the wellbore and formation. The effects of the IT heat conductivity coefficient (HCC), well depth and IT joint on the temperature distribution of the IT, completion casing, cement sheath, and formation are investigated. Results show the temperature of the formation around the wellbore has an exponentially decreasing relation with the distance to the wellbore. The temperature of the formation around the wellbore has an inverse relation with the IT HCC when the temperatures of the steam and the formation are given. The temperature of the casing outer wall is mainly determined by the steam temperature and IT HCC rather than by the initial formation temperature. The temperature of the casing at the IT joint is much larger than that of the other location. Due to the IT joint having a small size, the effects of the IT joint on the casing temperature distribution are limited to a small area only.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.27-35
• /
• 1998

This study describes the influence of combustion parameters on the nitric oxide emission, such as injection timing, air flow rate, injected amount of fuel, and compression ratio of engine. In order to determine the influence factors on the nitric oxide emission, the experiment were investigated with various parameters of engine cycle. According to the results of this study, the retardation of injection timing and the increases of airflow rate, and the decreases of fuel injection amount reduce the nitric oxide concentration in the exhaust emissions. Also, the increases of compression ration of engine increase in the concentration of nitric oxide formation in the combustion chamber. The results of this study give a guideline to decrease the nitric oxide formation by using the simulation program.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.140-143
• /
• 2001

To better understand the formation of necking in drawing processes of fibers, strain distributions during drawing processes have been analyzed. For simplicity, one-dimensional incompressible steady flow at a constant temperature was assumed and quasi-static model was used. To describe mechanical properties of solid polymers, non-linear visco-plastic material properties were assumed using the power law type hardening and rate-sensitive equation. The effects of various parameters on the neck formation were matematically analyzed. As material property parameters, strain-hardening parameter, visco-elastic coefficient and strain-rate sensitivity were considered and, for process parameters, the drawing ratio and the process length were considered. It was found that rate-insensitive materials do not reach a steady flow state and the rate-sensitivity plays a key role to have a steady flow. Also, the neck formation is mainly affected by material properties, especially for the quasi-static model. If the process length changes, the strain distribution was found to be proportionally re-distributed along the process line by the factor of the total length change.

• Carbon letters
• /
• 제6권2호
• /
• pp.96-100
• /
• 2005

Taguchi methodology has been applied to get an idea about the parameters related to the chemical vapour deposition technique, which influences the formation of semiconducting carbon thin film of a desired band gap. L9 orthogonal array was used for this purpose. The analysis based on Taguchi methodology suggests that amongst the parameters selected, the temperature of pyrolysis significantly controls the magnitude of band gap (46%). Sintering time has a small influence (30%) on the band gap formation and other factors have almost no influence on the band gap formation. Moreover this analysis suggests that lower temperature of pyrolysis (${\leq}$ $750^{\circ}C$) and lower time of sintering (${\leq}$ 1 h) should be preferred to get carbon thin film with the desired band gap of 1.2eV.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1465-1470
• /
• 2011

In this study, a poly(lactic-co-glycolic acid) (PLGA) microspheres was fabricated using emulsion solvent evaporation technique. During the procedure fabrication, some parameters process have effected on the formation of micro-carriers. The structure and morphology of micro-carriers were evaluated by SEM observation. Beside, heparin incorporated into microspheres was determined using toluidine blue method. Specifically, the effects of some parameters process such as ultrasonic levels, PLGA concentrations and freeze-dry times on the size, structure, porous formation and heparin entrapment of micro-carriers were studied carefully. We found that, the morphology and structure of carriers were influenced by the all above parameters. The diameter of the carriers varied from 20 to 400 ${\mu}M$ depending on experimental conditions. At suitable freeze-dry time, the pores were automatically formation on surface of microspheres with a significantly in the numbers of pore. After heparin incorporated porous PLGA microspheres, it was suggested that the highly heparin incorporated into porous PLGA microspheres could enhance of angiogenesis for tissue regeneration easily.

• 한국지반환경공학회 논문집
• /
• 제10권6호
• /
• pp.125-133
• /
• 2009

유체를 주입하여 암반을 파쇄하는 기술은 지열이나 석유 및 가스 등을 추출하는데 널리 사용되고 있는 방법이다. 본 기술을 적용 시 단일균열이 형성되면 이러한 에너지를 추출하는데 가장 이상적이다. 그러나 이러한 단일균열의 형성은 매우 드문 현상이며 분할된 형태의 균열생성이 흔한 현상이다. 이에 균열간 기계적 상호작용의 영향으로 설계변수에서도 단일균열을 가정하고 적용되었던 값과 차이를 보일 것으로 예상된다. 본 연구에서는 균열이 분할 생성되었을 경우 기계적인 상호작용을 고려할 수 있는 수치해석기법을 기존의 개발된 모델과 연계하여 설계변수인 길이, 균열폭, 그리고 압력을 계산하였다. 그 결과 균열의 형성은 이렇게 유체를 주입하여 암반을 파쇄 시 사용되는 설계변수에 상당한 영향을 끼치는 것으로 나타났다.

• 지질공학
• /
• 제27권3호
• /
• pp.323-330
• /
• 2017

지하 지층의 확인은 지표면 지질조사, 시추코어 분석, 시추코어 관찰, 물리검층 자료 분석 등의 다양한 방법을 이용한다. 이 가운데 물리검층 자료는 원위치에서 연속적으로 물성을 제공하므로 시추코어 분석 자료와 더불어 지층의 확인에 활용되고 있다. 본 연구에서는 완전파형 음파검층과 밀도검층 자료에서 이방성 변수를 구하고 이를 이용하여 지층의 구분에 적용하고자 하였다. 톰슨 이방성 변수(${\varepsilon},\;{\delta},\;{\eta}$)는 바쿠스(Backus) 평균법을 P파와 S파 속도, 밀도검층 자료에 적용하여 계산하였다. 이와 같은 방법을 캐나다 블랙풋의 물리검층 자료에 적용한 결과, 12개 구간으로 지층을 구분 할 수 있 수 있었다. 즉, 탄성파 속도 이방성을 반영하는 톰슨 이방성 값의 변화에서 지층의 구분이 가능하였고 지층 구분에 많이 이용하는 자연감마선검층 자료가 없는 경우에도 톰슨 이방성 변수를 이용하여 지층 구분이 가능함을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.810-813
• /
• 2000

Burr makes trobles on manufacturing process due to deburring cost, quality of products and productivity. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. The cutting parameters were investigated changing exit angle, rake nagle , lead angle in tool geometry as well as feed per tooth. Also we carried out experimets on several materials. Using the result of experimental study, burr types are classified according to appearance and formation mechanism in exit burr and we are considered the burr formation in each type of burr.

• Bulletin of the Korean Chemical Society
• /
• 제8권2호
• /
• pp.118-122
• /
• 1987

The micelle formation of NaDC was studied by fluorometric and viscometric measurements. The thermodynamic parameters of the primary and secondary micellization of the bile salt were evaluated. The primary micelle formation was appeared to be an entropy driven process due to hydrophobic effect, while the major driving force for secondary micelle formation of the bile salt is the large negative enthalpy. The secondary micelle provides less hydrophobic environment to pyrene than the primary micelle does. The cooperative aggregation of primary micelles via hvdrogen bond formation was proposed for the secondary micelle formation.