• Title/Summary/Keyword: Formaldehyde oxidation

Search Result 34, Processing Time 0.036 seconds

Process for the Production of Aldehyde Tanning Agent from Starch (Starch를 원료로 알데하이드 탄닝제의 제조 공정 연구)

  • Park, Jae Hyung;Paik, In Kyu;Yun, Jong Kuk;Cho, Do Kwang;Jung, Woon Gil
    • Clean Technology
    • /
    • v.11 no.1
    • /
    • pp.51-56
    • /
    • 2005
  • In this paper we prepared dextrin dialdehyde (DAS) of a different oxidation ratio (aldehyde content) and examined their properties and discussed their tanning mechanism. DAS was produced by reacting dextrin in aqueous medium with periodate ion used in a molar ratio between periodate and glucose of 0.3 to 1.0 at a temperature of 20 to $45^{\circ}C$. Since DAS reacts with amino group, DAS may have tanning property of aldehyde tanning agent (formaldehyde, glutaraldehyde).

  • PDF

EFFECT OF ETHENE $(C_2 H_4)$ ON THE PLASMA $DeNO_X$ PROCESS FROM DIESEL ENGINE EXHAUST

  • Park, Kwang-Seo;Kim, Dong-Inn;Lee, Hyeong-Sang;Chun, Bae-Hyeock;Yoon, Woong-Sup;Chun, Kwang-Min
    • International Journal of Automotive Technology
    • /
    • v.2 no.2
    • /
    • pp.77-83
    • /
    • 2001
  • Effect of ethene on the $DeNO_X$ conversion process in a simulated diesel engine operating conditions was investigated experimentally and theoretically. With the addition of even a small amount of ethene the NO to $NO_2$ conversion enhances greatly. The energy required to convert one NO molecule is 27 eV with 250 ppm ethene added, while 137 eV without ethene at 473 K. The effect of energy density, temperature, and the initial concentrations of ethene and oxygen are also discussed and the results show that the increase of the mentioned parameters lead to the promotion of NO oxidation. A kinetic model used in this study shows good agreement with the experimental result. Byproducts like formaldehyde ($CH_2$ 0) and methyl nitrite ($CH_3$ ONO) predicted by model calculation are broken up into CO and $H_2O$ eventually when high energy is delivered to the gas mixture. Sensitivity analysis shows that the main reactions of NO oxidation when ethene is added we: $HO_2+ NO \arrow NO_2 + OH, RO_2 + NO \arrow NO_2 + RO$, where R is a hydrocarbon radical. Also the direct oxidizing reaction of NO with O cannot be neglected.

  • PDF

Crystal Structure of Cytochrome cL from the Aquatic Methylotrophic Bacterium Methylophaga aminisulfidivorans MPT

  • Ghosh, Suparna;Dhanasingh, Immanuel;Ryu, Jaewon;Kim, Si Wouk;Lee, Sung Haeng
    • Journal of Microbiology and Biotechnology
    • /
    • v.30 no.8
    • /
    • pp.1261-1271
    • /
    • 2020
  • Cytochrome cL (CytcL) is an essential protein in the process of methanol oxidation in methylotrophs. It receives an electron from the pyrroloquinoline quinone (PQQ) cofactor of methanol dehydrogenase (MDH) to produce formaldehyde. The direct electron transfer mechanism between CytcL and MDH remains unknown due to the lack of structural information. To help gain a better understanding of the mechanism, we determined the first crystal structure of heme c containing CytcL from the aquatic methylotrophic bacterium Methylophaga aminisulfidivorans MPT at 2.13 Å resolution. The crystal structure of Ma-CytcL revealed its unique features compared to those of the terrestrial homologues. Apart from Fe in heme, three additional metal ion binding sites for Na+, Ca+, and Fe2+ were found, wherein the ions mostly formed coordination bonds with the amino acid residues on the loop (G93-Y111) that interacts with heme. Therefore, these ions seemed to enhance the stability of heme insertion by increasing the loop's steadiness. The basic N-terminal end, together with helix α4 and loop (G126 to Y136), contributed positive charge to the region. In contrast, the acidic C-terminal end provided a negatively charged surface, yielding several electrostatic contact points with partner proteins for electron transfer. These exceptional features of Ma-CytcL, along with the structural information of MDH, led us to hypothesize the need for an adapter protein bridging MDH to CytcL within appropriate proximity for electron transfer. With this knowledge in mind, the methanol oxidation complex reconstitution in vitro could be utilized to produce metabolic intermediates at the industry level.

Purification and Production Conditions of Antimicrobial Compound from Methylotrophic Actinomycetes MO-16 (Methanol 자화방선균 MO-16으로부터 항균성 물질의 정제 및 생산조건)

  • 김현수;이정수
    • Microbiology and Biotechnology Letters
    • /
    • v.27 no.5
    • /
    • pp.391-398
    • /
    • 1999
  • A methylotrophic actinomycetes strain MO-16, which produce the antimicrobial compound, was isolated from soil and supposed as Amycolatopsis sp. based on taxonomic studies. The cell-free extract of methanol-grown strain MO-16 showed dehydrogenase activity for methanol and formaldehyde when various electron acceptors were added for oxidation. On the other hand, methanol did not affect the production of antimicrobial compounds, and organic nitrogen sources such as corn steep liquor and peptone were better than inorganic nitrogen sources. These compounds showed broad antimicrobial spectrum to the tested strains such as bacteria and yeast. The antimicrobial comounds were very stable under heat(121$^{\circ}C$), acid(pH2.0), alkali(pH11.0) treatments. These compounds were isolated by ethylacetate extract, silica gel column chromatography and reverse phase HPLC. Two compounds(peak 1 and 2) were detected as antimicrobial compounds through the HPLC analysis. The peak 2 was purified as a single compound and revealed a 98% purity.

  • PDF

Template Synthesis and Characterization of Binuclear Nickel(Ⅱ) and Copper(Ⅱ) Complexes of Double-ring Macrocyclic Ligands

  • Shin-Geol Kang;Soo-Kyung Jung;Jae Keun Kweon
    • Bulletin of the Korean Chemical Society
    • /
    • v.12 no.2
    • /
    • pp.219-224
    • /
    • 1991
  • New binuclear Ni(Ⅱ) and Cu(Ⅱ) complexes with various alkyl derivatives of 1,2-bis(1,3,6,8,10,13-hexaaza-1-cyclotetradecyl) ethane, in which two fully saturated 14-membered hexaaza macrocyclic subunits are linked together by an ethylene chain, have been synthesized by the one step template condensations of formaldehyde with ethylenediamine and appropriate primary alkyl amines in the presence of the metal ions. Each macrocyclic subunit of the double-ring macrocyclic complexes contains one alkyl pendant arm and has a square planar geometry with a 5-6-5-6 chelate ring sequence. The visible spectra and oxidation properties indicate that the metal-metal interaction of the binuclear complexes are not significant. Synthesis, characterization, and the properties of the complexes are presented.

Emission Characteristics of Hazardous Air Pollutants from Diesel Heavy Duty Buses for Euro 5 according to After-treatment Systems (배출가스 저감장치에 따른 Euro 5 경유 대형버스의 유해대기오염물질 배출특성)

  • Hong, Heekyoung;Mun, Sunhee;Chung, Taekho;Kim, Sunmoon;Seo, Seokjun;Kim, Jounghwa;Jung, Sungwoon;Hong, Youdeog
    • Journal of ILASS-Korea
    • /
    • v.23 no.4
    • /
    • pp.175-184
    • /
    • 2018
  • Emission characteristics of regulated (NOx, PM, CO, NMHC) and unregulated (VOCs, aldehydes, PAHs) air pollutants were investigated for diesel heavy duty buses equipped with different after-treatment systems (DPF+EGR and SCR) under urban driving cycle. The combustion temperature and the working temperature of SCR catalysts were important to make impact on NOx emissions, whereas PM emissions were low. The alkane groups dominated NMVOCs emissions, making 42.6~59.4% of sum of the NMVOCs emissions. Especially, alkane emissions of DPF+EGR-equipped vehicle included DOC had 14.9~15.5% higher than those of SCR-equipped vehicle due to low efficiency of oxidation catalyst. In the case of individual NMVOCs, n-nonane and propylene emissions highly occupied for DPF+EGR and SCR, respectively. Formaldehyde emissions among aldehydes were the highest and PAHs emissions were hardly detected except naphthalene and phenanthrene. The NMHC speciation has been shown to be the highest of the formaldehyde ranged 20.8~21.5%. The results of this study will be contributed to establish Korean HAPs emission inventory for automobile source.

Quantitation of Formate in Plants and Its Enhancement in Response to Environmental Stresses

  • Kim, Jae-Kwang;Cho, Myoung-Rae;Baek, Hyung-Jin;Ryu, Tae-Hun;Kim, Jung-Bong;Kim, Jun-Heong;Kim, Myong-Jo;Yu, Chang-Yeon;Fukusaki, Ei-Ichiro;Kobayashi, Akio
    • Journal of Applied Biological Chemistry
    • /
    • v.50 no.4
    • /
    • pp.211-214
    • /
    • 2007
  • A solid-phase microextraction and gas chromatography-mass spectrometry utilizing $^{13}C$-formate as an internal standard for the determination of formate was proved to be applicable as a reliable quantitative method in several plants. We were the first to discover that trees contain larger pool sizes of formate than herbs. Our data also showed that the formate level of the leaves increased after the methanol-spraying, suggesting that methanol oxidation could convert formaldehyde into formate. In addition, drought and chilling led to the increase of endogenous formate in Arabidospsis thaliana. These results confirmed that formate is a universal stress signal in plants.

Oxidation of Isopropyl Alcohol in Air by a Catalytic Plasma Reactor System (촉매-플라즈마 반응 시스템을 이용한 아이소프로필 알코올 산화)

  • Jo, Jin Oh;Mok, Young Sun
    • Applied Chemistry for Engineering
    • /
    • v.25 no.5
    • /
    • pp.531-537
    • /
    • 2014
  • A catalytic plasma reactor was employed for the oxidation of isopropyl alcohol (IPA) classified as a volatile organic compound (VOC). Copper oxide (Cu : 0.5% (w/w)) supported on a multichannel porous ceramic consisting of ${\alpha}-Al_2O_3$ was used as a catalyst, which was directly exposed to the plasma created in it. The effects of discharge voltage and reaction temperature on the concentrations of IPA and its byproducts were examined to understand the behavior of the catalytic plasma reactor. Without thermal insulation, the reactor temperature increased up to $120^{\circ}C$ at an applied voltage of 17 kV (discharge power : 28 W), and the IPA at a flow rate of $1L\;min^{-1}$ ($O_2$ : 10% (v/v); IPA : 1000 ppm) was completely removed. At temperatures below $120^{\circ}C$, however, besides the desirable product $CO_2$, several unwanted byproducts such as acetone, formaldehyde and CO were also formed from IPA. On the other hand, when the reactor was thermally insulated, the plasma discharge increased the temperature up to $265^{\circ}C$ under the same condition and most of IPA was oxidized to $CO_2$. Without loading CuO on the ceramic support, the plasma discharge in the thermally insulated reactor produced nearly equal amounts of $CO_2$ and CO. On comparison, with the catalyst alone (temperature : $265^{\circ}C$), more than 70% of the removed IPA was simply converted into another type of VOC (acetone), indicating that the catalyst assisted by the plasma is more effective in the oxidation of IPA than that of the catalyst-alone process.

Photocatalytic Activity of Hierarchical N doped TiO2 Nanostructures

  • Naik, Brundabana;Kim, Sun Mi;Jung, Chan Ho;Park, Jeong Young
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.669-669
    • /
    • 2013
  • Hierarchical N doped TiO2 nanostructured catalyst with micro, meso and macro porosity have been synthesized by a facile self-formation route using ammonia and titanium isopropoxide precursor. The samples were calcined in different calcination temperature ranging from $300^{\circ}C$ to $800^{\circ}C$ at slow heating rate ($5^{\circ}C$/min) and designated as NHPT-300 to NHPT-800. $TiO_2$ nanostructured catalyst have been characterized by physico-chemical and spectroscopy methods to explore the structural, electronic and optical properties. UV-Vis diffuse reflectance spectra confirmed the red shift and band gap narrowing due to the doping of N species in TiO2 nanoporous catalyst. Hierarchical macro porosity with fibrous channel patterning was observed (confirmed from FESEM) and well preserved even after calcination at $800^{\circ}C$, indicating the thermal stability. BET results showed that micro and mesoporosity was lost after $500^{\circ}C$ calcination. The photocatalytic activity has been evaluated for methanol oxidation to formaldehyde in visible light. The enhanced photocatalytic activity is attributed to combined synergetic effect of N doping for visible light absorption, micro and mesoporosity for increase of effective surface area and light harvestation, and hierarchical macroporous fibrous structure for multiple reflection and effective charge transfer.

  • PDF

Characterization of Humic Acid in the Chemical Oxidation Technology(II) - Characteristics by Ozonation - (화학적 산화법에 의한 부식산의 분해처리 기술에 관한 연구(II) - 오존처리에 따른 분해특성 분석 -)

  • Rhee, Dong Seok;Jung, Young-Rim
    • Analytical Science and Technology
    • /
    • v.13 no.2
    • /
    • pp.241-249
    • /
    • 2000
  • In this paper, ozonation of humic acid in water was characterized using $UV_{254}$ absorbance, TOC, Ultra Filtration and $^{13}C-NMR$. Also, carbonyl compounds in ozonated water were analyzed by GC/MS using PFBOA method. Ozonation by-products of water containing humic acid were determined as formaldehyde, acetaldehyde, acetone, glyoxal and methylglyoxal. Results of $UV_{254}$ absorbance and TOC with ozonation time at humic acid 20, 100ppm represent that decrease rate of 80% within ozonation time is 20 min and TOC removal rate of 40-50% within ozonation time is 30 min. Results for $^{13}C-NMR$ and Ultra Filtration, humic acid of high molecular weight by ozonation are oxidated and decomposed so that it was conversed low molecular weight such as aldehydes, carboxylic acid.

  • PDF