• 한국물환경학회지
• /
• 제38권2호
• /
• pp.82-94
• /
• 2022

In this study, chemically modified biochar (NSBP500, KSBP500, OSBP500) derived from starfish was utilized to improve the adsorption ability of the SBP500 (Starfish Biochar Pyrolyzed at 500℃) in a solution contaminated with heavy metals. According to the biochar modification performance evaluation batch tests, the removal rate and adsorption amount of NSBP500 increased 1.4 times for Cu, 1.5 times for Cd, and 1.2 times for Zn as compared to the control sample SBP500. In addition, the removal rate and adsorption amount of KSBP500 increased 2 times for Cu, 1.8 times for Cd, and 1.2 times for Zn. The removal rate and adsorption amount of OSBP500 increased 5.8 times for Cu. The FT-IR analysis confirmed the changes in the generation and movement of new functional groups after adsorption. SEM analysis confirmed Cu in KSBP500 was in the form of Cu(OH)₂ and resembled the structure of nanowires. The Cd in KSBP500 was densely covered in cubic form of Cd(OH)₂. Lead(Pb) was in the form of Pb₃(OH)₂(CO₃)₂ in a hexagonal atomic layer structure in NSBP500. In addition, it was observed that Zn was randomly covered with Zn₅(CO₃)₂(OH)₆ pieces which resembled plates in KSBP500. Therefore, this study confirmed that biochar removal efficiency was improved through a chemical modification treatment. Accordingly, adsorption and precipitation were found to be the complex mechanisms behind the improved removal efficiency in the biochar. This was accomplished by electrostatic interactions between the biochar and heavy metals and ion exchange with Ca²⁺.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.347-350
• /
• 2005

The strength level for removal of lining concrete in tunnel is increased from 2.94MPa to 4.9MPa in 2004. This result in the increase of concrete curing time, and construction time would be delayed. In this study, in order to improve the efficiency of construction cycle and satisfy the strength criterion, a curing method is adopted, which is considering the hydration heat in the lining concrete member. As a result, it is shown that the concrete curing time for form removal is about 20hrs without the adjustment of concrete mix design. And construction cycle time is not changed compared to that before the change of strength criterion.

• 암석학회지
• /
• 제4권2호
• /
• pp.168-177
• /
• 1995

Crystal boundaries in igneous rocks are genetically classified in order to predict the geometric patterns of the boundaries which may aid deciphering the textural code in igneous rocks. Crystal boundaries may be formed by two end-member processes;(1) mechanical and (2) chemical removal of interstitial melt. Mechanical removal of the melt will form displacement impingement boundaries, while chemical removal of the melt will form growth impingement boundaries. The positions of boundaries relative to the material points may be affected by secondary processes such as (1) migration and (2) dissolution. The geometric features of crystal boundaries, suggested in this study, may be useful when studying igneous textures and processes, although it may be impossible to determine the suggested features with the analytical techniques currently avilable.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.553-556
• /
• 2004

This paper is to investigate the spalling and fire endurance of high performance RC column member with PP fiber and lateral confinement of metal lath and non fire resistance removal type form. According to test results, combination of PP fiber and metal lath as well as use fire resistance non removal type form had favorable fire resistance by discharging internal vapour pressure and lateral confining. After fire endurance test, compressive strength decreased markedly caused by internal expansion pressure and crack. Residual strength of plain concrete was decreased to $22\%$. The use of PP fiber and lateral confinement of metal lath and non removal type form enhanced the residual strength above $40\%$. Especially, the combination of $0.1\%$ of PP fiber and lateral confinement with the level of 2.3T exhibited more than $51\%$ of residual strength. Therefore, to improve fire endurance and spalling resistance, the combination of $0.1\%$ of PP fiber and metal lath with 2.3T can be the proper measure.

• 약학회지
• /
• 제8권3호
• /
• pp.74-75
• /
• 1964

In view of the fact that the technical grade alcohol sold in Korea contains considerable amount of ammonia (average 10 ppm), the author has investigated a new method of removal of ammonia by the addition of dl-tartaric acid. It was found that the ammonia contained in sample alcohol was removed completely, by the addition of dl-tartaric acid, to form ammonium bitartrate.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.443-448
• /
• 2009

The roughness models have developed to describe the grinding behaviour and predict the final quality of workpiece. The model forms of the plunge grinding process are generally established with initial and steady state model form in accordance with the accumulated metal removal. The steady state roughness model form are based on the grinding condition and specific parameters are used to show the influence of it according to the grinding process such as the equivalent chip thickness and accumulated metal removal. However, the models have been developed in past are not considered the effect of changing the grinding conditions in the same batch. In this paper, the roughness model form to consider the effect of changing grinding condition is proposed and the performance of proposed model is evaluated based on the experimental results.

• 생명과학회지
• /
• 제9권6호
• /
• pp.698-703
• /
• 1999

For the nitrate removal in recirculating aquaculture system, a denitrifying bacterium, Pseudomonas fluorescens, was isolated from municipal sewage and the cells were immobilized in modified-polyvinly alchol (PVA) gel beads. The immobilized cells in both the fixed-and fluidized-bed reactors showed 98% of denitrification efficiency with 6hr HRT, and the removal efficiency of total organic carbon (TOC) was above 90%. Form scanning electron microscopy (SEM) observation, it was known that biofilm formed in fixed-bed reactor was thicker than that formed in fluidized-bed reactor as operation time passed.

• Journal of Microbiology and Biotechnology
• /
• 제6권3호
• /
• pp.189-193
• /
• 1996

Submicron-sized polymeric particles (SSPP) were used to remove nucleic acids and endotoxins from cell lysates. The positively charged SSPP selectively adsorb nucleic acids and endotoxins and form complexes with them. The complexes can be easily removed by sedimentation or centrifugation. The removal of nucleic acids and endotoxins using SSPP also can be accomplished in the presence of cell and cell debris. Therefore, nucleic acids and endotoxins can be removed in an initial step of the down-stream processes. In bakers yeast and E. coli lysate systems, the level of DNA could be reduced more than three orders of magnitudes and endotoxins more than seven orders of magnitudes concurrently willi the cell debris removal process using SSPP.

• 상하수도학회지
• /
• 제10권1호
• /
• pp.78-84
• /
• 1996

The presence of ammonia, usually in the form of ammonium ion ($NH_4{^+}$), can enhance bacterial growth m the distribution system and make the production of drinking water more costly if ammonium must be removed to ensure good disinfection. Removal of ammonia by biological oxidation could be economical which prevents excess chlorine dosage In this research, effects of hydraulic retention time (HRT) and media type on the ammonia removal efficiencies of submerged biofilm reactor were investigated. The biofilm reactors combined the characteristics of high biological solids capture efficiency and good hydraulic control. The results indicate that biofilms can remove over 77 percent of the ammonia with HRT of longer than 2 hr even at low temperature ranging from 14.6 to $16.6^{\circ}C$. The HRT has a significant effect on nitrification. The overall nitrification and efficiency of ammonia removal increase with increasing HRT. It has also been observed that when the fibrous media was used, the ammonia removal, nitrification rate and endurance to shock improved.

• 산업기술연구
• /
• 제21권A호
• /
• pp.279-284
• /
• 2001

In this study, we analyzed the $NO_X$ removal effiency by the low temperature plasma process and investigated the effect of several process variables. Most of NO is converted into $NO_2$ and, later, into $HNO_3$ which reacts with $NH_3$ to form $NH_4NO_3$ particles. As the frequency of appling voltage increases, as the applied voltage increases or as the residential time increases, removal efficiency of the NO supplied initially increase. The removal efficiency of $NO_X$ also increases with the increase of $NH_3$ supplied.