• Advances in materials Research
• /
• v.8 no.3
• /
• pp.155-177
• /
• 2019

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded sandwich plate with new definition of porosity distribution taking into account composition and the scheme of the sandwich plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. Material properties of FGM layers are assumed to vary continuously across the plate thickness according to either power-law or sigmoid function in terms of the volume fractions of the constituents. The face layers are considered to be FG across each face thickness while the core is made of a ceramic homogeneous layer. Governing equations are derived from the principle of virtual displacements. The closed-form solution of a simply supported rectangular plate subjected to sinusoidal loading has been obtained by using the Navier method. Numerical results are presented to show the effect of the material distribution, the sandwich plate geometry and the porosity on the deflections and stresses of FG sandwich plates. The validity of the present theory is investigated by comparing some of the present results with other published results.

• International Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.10-16
• /
• 2016

A trigonometric Layerwise higher order shear deformation theory (TLHSDT) is developed and implemented for free vibration and buckling analysis of laminated composite and sandwich plates by analytical and finite element formulation. The present model assumes parabolic variation of out-plane stresses through the depth of the plate and also accomplish the zero transverse shear stresses over the surface of the plate. Thus a need of shear correction factor is obviated. The present zigzag model able to meet the transverse shear stress continuity and zigzag form of in-plane displacement continuity at the plate interfaces. Hence, botheration of shear correction coefficient is neglected. In the case of analytical method, the governing differential equation and boundary conditions are obtained from the principle of virtual work. For the finite element formulation, an efficient eight noded $C^0$ continuous isoparametric serendipity element is established and employed to examine the dynamic analysis. Like FSDT, the considered mathematical model possesses similar number of variables and which decides the present models computationally more effective. Several numerical predictions are carried out and results are compared with those of other existing numerical approaches.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.169-177
• /
• 2018

Twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin have been developed computationally for 3,000 TEU container ship through parametric study. The objective function is to minimize delivered power in model scale. Design variables are twisted angle, rudder bulb diameter and fin angle. The governing equation is Reynolds averaged Navier-Stokes equations in an unsteady turbulent flow and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. The calculation was carried out in towing and self-propulsion conditions at design speed. The sliding mesh technique was employed to simulate the flow around the propeller. Form factor is obtained from the towing computation. Self-propulsion point is obtained from the self-propelled computations at two propeller rotating speeds. The delivered power due to the designed twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin are reduced by 1.1%, 1.6%, and 2.0%, respectively.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.216-226
• /
• 2015

This study identifies factors of perceived risk of up-cycling fashion products and investigates perceived risk factors that influence consumers' trust, purchase intention, and recommendation intention towards upcycling fashion products. We also examine the relationship of trust, purchase intention, and recommendation intention for upcycling fashion products. A qualitative research method using a free narrative form and depth interview were used. The perceived risk from up-cycling fashion products generated 5 factor solutions: aesthetic risk, sanitary risk, social risk, performance risk, and economic risk. Next, 201 effective data were collected from a questionnaire survey and analyzed with SPSS 22.0. The results are summarized as follows. First, aesthetic risk and performance risk had a negative effect on products. Second, aesthetic risk and performance risk had negative influence on purchase intention for upcycling fashion products. Third, performance risk had a negative impact on recommendation intention for upcycling fashion products. Fourth, trust had positive effect on purchase intention and recommendation intention for upcycling fashion products. The results of the current study provides various theoretical and practical implications for marketers and retailers interested in up-cycling fashion products.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.143-148
• /
• 2010

A Statistical methods are used to determine the reliability of a Fuel Boost Pump for aviation. Failures are referenced from failure reports. The failure-free periods between successive failure events are evaluated in the form of weibull distribution. The results of analysis were calculated shape factor, scale parameter and mean time to failure. It found that the reason of failure is wear-out period.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.3-12
• /
• 1975

As for two dimensional added mass coefficients for straight framed hull forms in a free surface of an ideal fluid, theoretical calculations by F.M. Lewis, vertical, K. Wendel, J.H. Hwang, and etc. are available; vertical modes of rectangular and triangle sections by Lewis, vertical, horizontal and torsional models of rectangular and triangle section by Wendel, and systematical calculations for vertical modes of single chine forms by Hwang. In this paper, employing the conformal transformation by which a unit circle and its exterior region can conformally mapped to a polygon and its exterior region, the author calculated two dimensional added inertia coefficients systematically for straight framed sections with single chine in horizontal and torsional modes of vibrations. As the results, it was found that sloping side angle is an important factor measuring the magnitude of two dimensional added inertia coefficient for a set of given values of the sectional area coefficient and the beam-draft ratio. To grasp it cleary in physical sense, pressure distributions are investigated for some typical section contours. The numerical results are presented graphically in the form of two dimensional added sectional area coefficients with beam-draft ratios and sloping side angles as parameters, so that the data may conveniently utilized for estimation of the added inertia coefficients based on a three parameter technique.

• Structural Engineering and Mechanics
• /
• v.55 no.5
• /
• pp.1001-1014
• /
• 2015

Bending analysis of functionally graded (FG) nano-plates is investigated in the present work based on a new sinusoidal shear deformation theory. The theory accounts for sinusoidal distribution of transverse shear stress, and satisfies the free transverse shear stress conditions on the top and bottom surfaces of the plate without using shear correction factor. The material properties of nano-plate are assumed to vary according to power law distribution of the volume fraction of the constituents. The size effects are considered based on Eringen's nonlocal theory. Governing equations are derived using energy method and Hamilton's principle. The closed-form solutions of simply supported nano-plates are obtained and the results are compared with those of first-order shear deformation theory and higher-order shear deformation theory. The effects of different parameters such as nano-plate length and thickness, elastic foundation, orientation of foundation orthtotropy direction and nonlocal parameters are shown in dimensionless displacement of system. It can be found that with increasing nonlocal parameter, the dimensionless displacement of nano-plate increases.

• Smart Structures and Systems
• /
• v.23 no.1
• /
• pp.31-44
• /
• 2019

The present study investigate the compressive stress, shear stress, tensile stress, vertical electrical displacement and horizontal electrical displacement induced due to a load moving with uniform velocity on the free rough surface of an irregular transversely isotropic functionally graded piezoelectric material (FGPM) substrate. The closed form expressions ofsaid induced stresses and electrical displacements for both electrically open condition and electrically short condition have been deduced. The influence of various affecting parameters viz. maximum depth of irregularity, irregularity factor, parameter of functionally gradedness, frictional coefficient of the rough upper surface, piezoelectricity/dielectricity on said induced stresses and electrical displacements have been examined through numerical computation and graphical illustration for both electrically open and short conditions. The comparative analysis on the influence of electrically open and short conditions as well as presence and absence of piezoelectricity on the induced stresses and induced electrical displacements due to a moving load serve as the salient features of the present study. Moreover, some important peculiarities have also been traced out by means of graphs.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.155-163
• /
• 2021

This design proposal research is meaningful as Jogakbo can retain the traditional value of the it's design as it becomes a contemporary design proposal. As a specific method of research, history was been investigated to find meaning and formative characteristics defined through prior research under the theme of Jogakbo. Ideas, such as silhouettes, details for design, and the making domestic and foreign designer examples were obtained. The fabric used for the works were recycled from past leather works. All materials are sheep skin. There were various processed surfaces used to avoid monotony. Jogakbo's cotton composition focused on free and radial patterns. The pattern was manufactured using a flat and 3D combination, and the selection of items was mainly made with a simple and light silhouette, so that Jogakbo's details, such as dresses, slip dress, and vests could stand out. Color is an important factor in Jogakbo. However, traditions which are relics of the times, do not need to be preserved in their original form. If changes are inherited with reasonable grounds and directions in line with the changing times, the significance and values are retained are sufficient. It is hoped that these design development studies will continue in the future so that our precious cultural heritage can continue to change and develop positively.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.148-153
• /
• 2024

In this study, a methodology for evaluating impact strength in rollable devices was developed, focusing on measuring impact strength and evaluating rolling and unrolling durability simultaneously, with findings reported from tests on a real demonstration unit. The study utilized a flexible and rollable polyimide (PI) substrate for the evaluations. The chosen parameters for this methodology were a flat-type impactor, weights of 300 g, 500 g, and 1000 g, a rolling shaft ranging from 30 R to 5 R, and the positioning of the impactor. The results revealed that the difference in defect rates when comparing the 300 g and 500 g weights was minimal. However, the adoption of a 1000 g weight markedly increased the defect count due to damage to the PI film's surface. Furthermore, an uptick in rolling and unrolling cycles led to more pronounced surface scratches on the PI film. These methods and findings are poised to make a substantial contribution towards refining reliability testing for a wide array of rollable device applications, including smartphones, watches, pads, and wearable technology.