• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.103-115
• /
• 2018

In this work, a simple but accurate hyperbolic plate theory for the free vibration analysis of functionally graded material (FGM) sandwich plates is developed. The significant feature of this formulation is that, in addition to including the shear deformation effect, it deals with only 3 unknowns as the classical plate theory (CPT), instead of 5 as in the well-known first shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT). A shear correction factor is, therefore, not required. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM face sheet and the homogeneous core and the sandwich with the homogeneous face sheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. Numerical results of the present theory are compared with the CPT, FSDT, order shear deformation theories (HSDTs), and 3D solutions. Verification studies show that the proposed theory is not only accurate and simple in solving the free vibration behaviour of FGM sandwich plates, but also comparable with the higher-order shear deformation theories which contain more number of unknowns.

• 복식
• /
• 제60권9호
• /
• pp.95-105
• /
• 2010

The purpose of this study is in allowing thinking about the design development process which is more towards the visual and perceptional aspects related to the form structure by more diverse methods by typology of idea generation. To accomplish such goal, researches in the psychology, pedagogy, engineering, and consilient studies as well as related precedent researches and reference data in architecture, promotion, industrial design, and other art fields and fashion designs are collected and analyzed to see the study trend. In addition, in the content analysis method based on such, the idea generation was classified into types in consideration of relevancy, usefulness, and suitability with fashion. First, a concentrated thinking of a limited space is a method of leading an optimal design by focusing on solving the cause of a problem within a space which generates the problem. Second, plan thinking per section of structure decomposition is a method of dismantling the design problems per organization, thinking type, factor, and characteristic into sub-modules to re-interpret and re-organize the problems in various aspects. Third, an associated thinking through interpreting relationships among vocabularies is a method of selecting the marginal languages that allow a person to come up with concrete forms and the key words related to fashion to import the characteristics and attributes of the marginal languages and thematic relationship between the two terms to search the relevancy. Lastly, the free integrated thinking of language extension is a method of groping integration between other fields and fashion by free integration among the extended terms by extending the vocabularies through inferring metaphorical expressions founded upon individual's memories or knowledge concepts regarding theme words that do not allow concrete forms to come up.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2006년도 추계학술대회 및 정기총회
• /
• pp.24-28
• /
• 2006

Author have studies lichen flora of the most important ice-free areas of Continental Antarctic: Bunger Hills, and the vicinity of Prudz Bay (Larsemann Hills, and Radok Lake in Prince Charles Mountains). Totally 44 lichen species from 22 genera were reported for Bunger Hills and 50 lichen species from 22 genera and 10 families: Acarosporaceae, Lecanoraceae, Lecideaceae, Parmeliaceae, Pertusariaceae, Physciaceae, Rhizocarpaceae, Stereocaulaceae, Theloschistaceae, and Umbilicariaceaewere reported for the Prudz Bay Region. 20 lichen species were found in the region for the first time. Phytogeographic analysis indicated a relatively high proportion of species with bipolar distribution - about 50% of recorded lichen species. About 30% of lichens normally don't extend into maritime zone occurring in continental Antarctic only. The most common lichen families in the region are Buelliaceae, Lecanoraceae and Teloschistaceae. The water supply and not a temperature is the critical factor for lichens in the Continental Antarctic. Moisture appears to be supplied for lichens not only from snow-melt water but mainly from air. In Maritime Antarctic, due to high air humidity macrolichens form communities everywhere (Himantormia, Usnea and Umbilicaria). In oases of Continental Antarctic extensive sites are lacking in lichen cover, even if the ground is normally snow free. Lichens occur at humid sites with moisture which were brought by winds over the ice cap and poorly developed or absent in dry areas. Of particular significance for lichens are substrate characteristics, animals influence and salinity brought by wind in coastal areas. Most rich lichen vegetation developed in oases around nests of snow petrels, where the melt water is enriched by nutrients. In contrast, the most pure vegetation is on mobile sand and gravel and in salted coastal habitats.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.271-271
• /
• 2006

The structural, dielectric and piezoelectric properties of $[Bi_{1-x}(Na_{0.7-x}K_{0.2}Li_{0.1})]_{0.5}BaxTiO_3$ (BNKLBxT) ceramics were studied for the compositional range, x = 0-0.08. The samples were prepared by conventional sintering technique. The result of X-ray diffraction (XRD) suggest that $Ba^{2+}$ diffuse into the $[Bi(Na_{0.7}K_{0.2}Li_{0.1})]_{0.5}TiO_3$ (BNKLT) lattices to form a solid solution with a single phase perovskite structure. The ceramic show excellent piezoelectric and ferroelectric properties, and optimum properties measured are as follows: piezoelectric constant $d_{33}=230pC/N$, planar electromechanical coupling factor $k_p\;=\;40.3%$, remanent polarization $P_r\;=\;30\;{\mu}C/cm^2$, and coercive field $E_c\; =\;2.5\;kV/mm$, respectively.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.705-709
• /
• 2006

Nb was doped to Pb-free $(Bi_{0.5}Na_{0.5})TiO_3$ (BNT) by a solid state mixing process to form $(Bi_{0.5}Na_{0.5})Ti_{1-x}Nb_xO_3\;(x=0{\sim}0.05)$ (BNTNb) and its doping effects on ferroelectric and piezoelctric properties of BNT were investigated. The BNTNb solid solutions were formed up to x=0.01 with no apparent second phases while grain sizes decreased. As x increased, coercive field ($E_c$) and mechanical quality factor ($Q_m$) decreased but piezoelectric constant ($d_{33}$) increased, which indicates Nb acts as a donor for BNT.

• Steel and Composite Structures
• /
• 제13권1호
• /
• pp.91-107
• /
• 2012

In this research, mechanical buckling of hybrid functionally graded plates is considered using a new four variable refined plate theory. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The plate properties are assumed to be varied through the thickness following a simple power law distribution in terms of volume fraction of material constituents. Governing equations are derived from the principle of minimum total potential energy. The closed-form solution of a simply supported rectangular plate subjected to in-plane loading has been obtained by using the Navier method. The effectiveness of the theories is brought out through illustrative examples.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.787-792
• /
• 2015

Recently, 3D printing technology is a hot issue in various industrial fields. According to the user's application, it allows for the free form fabrication method to be utilized in a wide range. The powder based fusion technique is one of the 3D printing methods. When using this method it is possible to apply the various binder jetting techniques such as piezo, thermal bubble jet, dispenser and so on. In this paper, a multi thermal bubble ink jet was integrated for jetting of powder binding material and developing a power fused 3D printing system. For high quality 3D printing parts, it needs an analysis and evaluation of the behavior of the thermal bubble ink jet head. In the experiment, a correlation between jetting binder quantity and layer thickness of powder was investigated, and a 3D part model was fabricated, which was used by measuring the scale factor.

• Toxicological Research
• /
• 제24권2호
• /
• pp.129-135
• /
• 2008

The results of recent studies indicate that high levels of free fatty acids(FFAs) and adipokines may be the main causes of non-alcoholic liver disease; however, the molecular mechanism that links FFAs to lipotoxicity remains unclear. In the present study, we treated HepG2 cells with FFA(either palmitate or oleate) to investigate the mechanisms involved in lipotoxicity in the liver cells. We also treated cells with palmitate in the presence of a chemical chaperone, 4-phenylbutyric acid(PBA), to confirm the involvement of ER stress in lipotoxicity. Palmitate significantly induced cytotoxicity in dose- and time-dependent manners. Apoptosis was also significantly induced by palmitate as measured by caspase-3 activity and DAPI staining. Palmitate led to increased expressions of the spliced form of X-box-protein(Xbp)-1 mRNA and C/EBP homologous transcription factor(CHOP) protein, suggesting activation of the unfolded-protein response. PBA co-incubation significantly attenuated apoptosis induced by palmitate. The above data demonstrate that high levels of palmitate induce apoptosis via the mediation of ER stress in the liver cells and that chemical chaperones act to modulate ER stress and accompanying apoptosis.

• 한국실내디자인학회논문집
• /
• 제20권4호
• /
• pp.11-20
• /
• 2011

Jeju Special Self-Governing Province are trying every effort to be presented as an International Free City with unique combination of history, culture and landscape, This research focuses on the analysis of characteristics we can find in buildings in Jeju province. The main purpose is to provide basic and informative materials for the landscape formation of Jeju by investigating current status of buildings in Jeju province. This research divides Jeju province into 34 areas and categorizes buildings by use. 2,973 cases in total are collected and analyzed their architectural features. A basic analysis of the collected data is conducted in the first and the second stages. And In the third stage, 505 cases whose addresses can be identified are selected for the in-depth analysis of the registered building data on architecture year, building area, and total area. These data are analyzed by the categories of region, year, and size for the study of general characteristics of buildings in Jeju. The results show that territoriality is weak because of the simplicity of building layout on the streets. Exterior form of buildings, streetscape image, and overall city image are tedious and boring because of the lack of the variety of facade and exterior finishing materials.

• Advances in materials Research
• /
• 제8권3호
• /
• pp.155-177
• /
• 2019

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded sandwich plate with new definition of porosity distribution taking into account composition and the scheme of the sandwich plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. Material properties of FGM layers are assumed to vary continuously across the plate thickness according to either power-law or sigmoid function in terms of the volume fractions of the constituents. The face layers are considered to be FG across each face thickness while the core is made of a ceramic homogeneous layer. Governing equations are derived from the principle of virtual displacements. The closed-form solution of a simply supported rectangular plate subjected to sinusoidal loading has been obtained by using the Navier method. Numerical results are presented to show the effect of the material distribution, the sandwich plate geometry and the porosity on the deflections and stresses of FG sandwich plates. The validity of the present theory is investigated by comparing some of the present results with other published results.