• 한국주조공학회지
• /
• 제21권5호
• /
• pp.290-295
• /
• 2001

We fabricated test samples containing various shape elements and surface roughness checking points for the jewelry cast master patterns by employing the 3D computer aided design (CAD), selective laser sintering (SLS) rapid prototype (RP) with the DuraForm powders. We varied the alignment angle from $0^{\circ}$ to $10^{\circ}$ at a given layer thickness of 0.08 and 0.1mm, respectively, in RP operation. Dimensions of the shape elements as well as values of surface roughness are characterized by an optical microscope and a contact-scanning profilometer. Surface roughness values of the top and vertical face increased as the alignment angle increased, while the other roughness values and shape elements variation were not depending on the alignment angle. The resolution of the shape realization was enhanced as the layer thickness became smaller. The minimum diameter of the hole, common in jewelry design, was 1.2 mm, and the shrinkage became 12% at the 1.6 mm-diameter hole, Our results implied that we face down the proposed design elements with $0^{\circ}$ alignment angle, and consider the shrinkage effect of each shape element in DuraForm RP jewelry modeling.

• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.341-358
• /
• 1995

The results of a series of ten W-shaped test specimens subjected to monotonic, quasi-static cyclic loading and fatigue type of loading in the form of constant amplitude tests are presented. The objectives were to assess and compare the rotation capacity and energy absorption of monotonically and cyclically loaded beams, and for the latter specimens to document the deterioration in the form of low cycle fatigue due to local buckling. In addition, strength and energy dissipation deterioration and damage models have been developed for the steel beam section under consideration. Finally, a generalized model which uses plate slenderness values and lateral slenderness is proposed for predicting rate in strength deterioration per reversal and cumulated damage after a given number of reversals.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.201-206
• /
• 2004

Laser scanner are getting used for inspection and reverse engineering in industry such as motors, electronic products, dies and molds. However, due to the lack of efficient scanning technique, the tasks become limited to the low accuracy purpose. The main reasons for this limitation for usefulness are caused from the optical drawback, such as irregular reflection, scanning direction normal to measuring surface, the influence of surface integrity, and other optical disturbances. To overcome these drawback of laser scanner, this study propose the mechanism to reduce the optical trouble by using the 2 kinds of rotational movement axis and by composing the spherical coordinate to scanning the surface keeping normal direction consistently. So, it could be designed and interfaced the measuring device to realize that mechanism, and then it could acquisite the accurate 3D form cloud data. Also, these data are compared with the standard master ball and the data acquisited from the touch point sensor, to evaluate the accuracy and stability of measurement and to demonstrate the implementation of an dental tooth purpose system

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.186-193
• /
• 2012

This study is to reveal the periodical form of the 4 staged building sites with the size and the site composition of the master plan and floor plan of the Ungjindan (altar) from the Ungjindan excavation works in 2011. In order to project the research results aiming to the purpose of the study, the basic study was done with collecting data about shrine architecture for its architectural characteristics and case studies with ancestral facilities such as the Ak hae dok (national-level ancestral ritual to the big mountain, ocean and river) to understand the exact form of the site plan and architectural composition elements through the general information and excavation status. In addition, with the current situation and information from the excavation works the planned measurement scale will be calculated in inference for the size of the construction by stages and speculate the floor plan composition of the shrine architecture.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.865-870
• /
• 2003

A motion controller has been used variously in industry such as semiconductor manufacture equipment, industrial robot, assembly/conveyor line applications and CNC equipment. There are several types of controller in motion control. One of these is a PC-based motion controller such as PCI or ISA, and another is stand-alone motion controller. The PC bus-based motion controller is popular because of improving bus architectures and GUI (Graphic User Interface) that offer convenience of use to user. There are some problems in this. The PC bus-based solution allows for only one of the form factors, so it has a poor flexibility. The overall system package size is bigger than other motion control system. And also, additional axes of control require additional slot, however the number of slots is limited. Furthermore, unwieldy and many wirings come to connect plants or I/O. The stand-alone motion controller has also this limit of axes of control and wiring problems. To resolve these problems, controller must have capability of operating as stand-alone devices that resides outside the computer and it needs network capability to communicate to each motion device. In this paper, a network-based stand-alone motion system is proposed. This system integrates PC and motion controller into one stand-alone motion system, and uses CAN (Controller Area Network) as network protocol. Single board computer that is type of 3.5" FDD form factor is used to reduce the system size and cost. It works with Windows XP Embedded as operating system. This motion system operates by itself or serves as master motion controller that communicates to slave motion controller. The Slave motion controllers can easily connect to master motion system through CAN-network.

• Journal of Acupuncture Research
• /
• 제33권3호
• /
• pp.161-168
• /
• 2016

Objectives : This study was done to show the clinical effect of miniscalpel acupuncture treatment on osteoarthritis of the knee which is refractory to acupuncture treatment. Methods : A patient was treated with acupuncture for three weeks, non-treated(wash out period) for two weeks, and treated with miniscalpel acupuncture for three weeks. The effect of treatments were measured with Visual Analogue Scale(VAS), Range of Motion(ROM), Short form McGill pain questionnaire(SF-MPQ), Western Ontario and McMaster Universities Osteoarthritis Index(WOMAC). Results : During the three weeks of acupuncture treatment, VAS, SF-MPQ and WOMAC improved, but after two weeks of the wash out period each score worsened. During the three weeks of miniscalpel acupuncture VAS, SF-MPQ, and WOMAC improved while ROM improved remarkably. Conclusion : These results suggest that miniscalpel acupuncture might be a therapeutic option for knee degenerative osteoarthritis patients who does not responded to acupuncture treatment.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.613-619
• /
• 2003

블루투스는 무선으로 근거리 디바이스들을 연결하는 통신 기술로, 하나의 마스터와 하나 이상의 슬레이브 기기가 피코넷을 구성하고, 피코넷들이 연결되어 스캐터넷을 이루게 된다. 스캐터넷에서 여러 피코넷에 속하면서, 피코넷간 연결을 해주는 디바이스를 브릿지 또는 게이트웨이 노드라고 하는데 스캐터넷이 효율적으로 동작하도록 하기 위해서는 피코넷 내부의 마스터와 슬레이브 간의 효과적인 피코넷 스케줄링과 함께 브릿지 노드를 효과적으로 스케줄링 해주는 스캐터넷 스케줄링이 필요하다. 본 논문에서는 랑데부 포인트와 랑데부 윈도우를 이용한 스캐터넷 스케줄링 알고리즘과 함께 스니프 모드를 이용한 피코넷 스케줄링 알고리즘을 제안하고, 시뮬레이션을 통해 기존 방식과의 성능을 비교, 분석하였다. 그 결과 트래픽의 상태에 따라 링크에 할당되는 대역폭을 가변함으로써 무선자원을 효과적으로 분배할 수 있음을 보였다. 또한 제안된 알고리즘은 전력 소비 절약 모드인 스니프 모드의 사용으로 전력 소비를 절약할 수 있다는 장점을 갖는다.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.310-320
• /
• 2000

Statement of the problem. The record base in fabricating procedures of the complete denture, as a temporary form for reproducing denture base, is used to record upper and lower jaw relation and to align artificial teeth and try-in it in the mouth. The accuracy of jaw relation record is affected by the accuracy, stiffness and stability of the record base. So, the accuracy of record base is the most important requirements of jaw relation records. Purpose of study. The purpose of this study was to evaluate the gap that occurred over the palatal area of a maxillary record base fabricated with autopolymerizing resin and light-curing resin. Methods/material. The maxillary record bases were fabricated out of autopolymerizing resin that is used the most frequently in clinics and light-curing resin that attracts special attention for its several merits. The light-curing resin was made by two kinds of polymerization methods, which are one step curing method and multiple step curing method. All record bases were cut in certain positions of the master cast 1 hour and 1 day later after fabrication and the accuracy of the master cast was measured and analyzed with a microscope. Results. A pattern of gap formation between the record base and the maxillary cast was observed in all specimens. According to kinds of resins, autopolymerizing resin was significantly more accurate than light-curing resin. There was no statistical difference according to time lapse, and in all three groups, the maximum discrepancy occurred at the posterior border in the mid-palatal region. Conclusion. The autopolymerizing resin is better than light-curing resin, and multiple step curing method is more accurate than one step curing method when using light-curing resin.

• 대한치과보철학회지
• /
• 제36권3호
• /
• pp.496-505
• /
• 1998

The purpose of this study was to evalute the effect of immersion disinfection on the dimensional stability of rubber impression materials. The metallic master model was made in order to simulate the intraoral arch form. Impressions were made from four impression materials (Exaflex, Extrude, Reprosil, Impregum-F) and immersed in three disinfectant solutions (Wydex, Vi-Pon, Potadine). Casts from the impressions were measured according to the interpreparation distance. The A-B and The B-D abutment distance were compared with the control group and disinfected groups. The results were as follows; 1. The measurements of the stone cast increased relative to the master model and there was a significant difference (P<0.05). 2. The relative dimensional change of the stone cast as compared with master model ranged from 0.10% to 0.56% in the A-B distance and ranged from 0.04% to 0.27% in the B-D distance. 3. The dimensional change of the disinfected groups as compared with the control group was significantly different in the three impression materials except for Impregum-F (P<0.05). 4. The relative dimensional change of the disinfected groups compared with the control group ranged from 0% to 0.20% in the A-B distance and ranged from -0.09% to 0.11% in the B-D distance. These results suggest that immersion disinfection of rubber impression materials by chemical disinfectants causes very small dimensional change and the change is clinically acceptable for prothesis fabrication

• 공학교육연구
• /
• 제19권1호
• /
• pp.3-10
• /
• 2016

This study was conducted to identify Korea's TRIZ research trends and to propose implications for setting a direction for future TRIZ research by analyzing TRIZ-related research over the past 15 years, or from 1998 to 2013. The subjects in this study were 256 published studies, including 149 studies in academic journals, 97 master theses, and 10 doctorate theses. This study reached the following conclusion. First, academic journals were the most frequent form of publication of TRIZ-related studies, followed by master's degree theses, and doctorate theses. Second, two or more TRIZ tools were used to solve problems and the most frequently used topic was technical contradiction as the result of frequency analysis for TRIZ research topics. This signified that it was easier to solve problems when various TRIZ tools were used, rather than applying a single TRIZ tool while technical contradiction was considered to be actively used as it allowed the relatively easy understanding of TRIZ. Third, the use of TRIZ research topics had increased and diversified each year. This could be interpreted to be based on the increased understanding of TRIZ. Fourth, case studies and experimental research were the most frequently used methods in TRIZ-related research. This was because various TRIZ tools were applied on problem solving situations, which were directly proposed as the research result. Fifth, the use of TRIZ was increasing in the educational field. Specifically, it was noted that TRIZ was used in creativity education with the use of 40 invention principles in elementary, middle, and high schools.