• 소성∙가공
• /
• 제32권6호
• /
• pp.352-359
• /
• 2023

Recently, independent suspension systems have been applied not only to passenger cars but also to large commercial vehicles. Therefore, the need for research to domestically produce such independent suspensions for large commercial vehicles is gradually increasing. In this paper, we conducted research on the manufacturing technology of the relay lever, which are integral components of independent suspension systems for large commercial vehicles. Our goal was to reduce the flash volume generated during the forging process. The shape variables of the initial billet were adjusted to find proper forming conditions that could minimize flash volume while performing product forming smoothly. Shape variables were set as input variables and the flash volume was set as an output variable, and simulations were carried out to analytically predict the volume of the flash area for each variable condition. Based on the data obtained through numerical simulations, a regression model and an artificial neural network model were used to develop a prediction model that can easily predict the flash volume for variable conditions. For the corresponding prediction model, a goodness of-fit test was performed to confirm a high level of fit. By comparing and analyzing the two prediction models, the high level of fit of the ANN model was confirmed.

• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.47-53
• /
• 2020

본 연구는 30mm 자동포에 적용 중인 폐쇄기의 내구성을 향상시킴으로서 제품의 신뢰성을 증가시키는 것을 목적으로 하고 있다. 연구 대상인 폐쇄기는 왕복운동을 통해 탄의 장전, 약실 폐쇄, 탄피 추출 등의 기능을 하는 포의 주요 구성품으로 높은 신뢰성이 요구되지만 운용 중 폐쇄기 균열이 조기에 발생됨에 따라 개선이 필요하였다. 개선을 위해 원인 분석을 수행하여 균열은 반복적인 충격에 의해 발생함을 확인하였다. 그러하여 다음과 같은 개선방안을 연구하고 입증 사격을 통해 효과를 증명하였다. 개선방안으로 소재 변경으로 충격 흡수에너지를 증가시켰으며 균열 부위의 R 값을 증대하여 응력 집중을 완화하였다. 또한, 쇼트피닝 추가, 크롬도금 삭제, 단조 방법 변경으로 피로수명을 증가시켰다. 개선품의 입증 사격 결과 5,000발까지 사격 장애가 발생하지 않았고 균열의 시작이 늦춰졌으며 그 깊이가 작아졌다. 따라서 개선방안이 적용된 폐쇄기는 기존 제품 보다 내구성이 향상됨을 확인하였다. 본 연구는 유사제품의 내구성 향상, 폐쇄기 균열 성장 속도 예측(수명 연구) 및 균열 허용 기준 설정을 추진할 때 유용한 참고 자료로 활용될 수 있을 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.699-704
• /
• 2002

The pipe with a long-neck flange is widely used in power plants, chemical plants, and shipbuilding companies. New the pipe with a long-neck flange is manufactured by welding a thick flange to a pipe. But this long-neck flange pipe has some deflects in the welding region such as unfitting and local thermal fatigue, which weaken the strength around the neck of the flange. Moreover, after welding the flange, the contacting surfaces of the flange have to be machined flat. So, that is uneconomical. Therefore, to solve the above problems of the long-neck flange pipe, a new process, which has no defects around the flange neck, is required. In this study, three forming processes are suggested to get an enhanced long-neck flange. First suggested process consists of conical terming and flange forming. Second and third suggested processes consist of the bulging of a long pipe locally heated by induction coils and the flange forming. The differences between second and third suggestions are the thickness and local heating area of the pipe. That is, the thickness of the initial pipe of third suggestion is larger than that of the final product, and the local heating area is smaller than that of second suggestion. These three suggestions fur forming a long-neck flange are simulated by FE analyses with a commercial cede DEFORM 2D. Especially, the theoretical result of FE analysis on the first suggestion fur forming a long-neck flange is verified by the experiment with aluminum 6063 pipes. From the theoretical and experimental results, it is concluded that three suggested processes are very useful in order to manufacture the pipe with a long-neck flange without any deflects.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.212-219
• /
• 2002

The pipe with a long-neck flange is widely used in power plants, chemical plants, and shipbuilding companies. Now the pipe with a long-neck flange is manufactured by welding a thick flange to a pipe. But this long-neck flange pipe has some defects in the welding region such as unfitting and local thermal fatigue, which weaken the strength around the neck of the flange. Moreover, after welding the flange, the contacting surfaces of the flange have to be machined flat. So, that is uneconomical. Therefore, to solve the above problems of the long-neck flange pipe, a new process, which has no defects around the flange neck, is required. In this study, three forming processes are suggested to get an enhanced long-neck flange. First suggested process consists of conical forming and flange forming. Second and third suggested processes consist of the bulging of a long pipe locally heated by induction coils and the flange forming. The differences between second and third suggestions are the thickness and local heating area of the pipe. That is, the thickness of the initial pipe of third suggestion is larger than that of the final product, and the local heating area is smaller than that of second suggestion. These three suggestions for forming a long-neck flange are simulated by FE analyses with a commercial code DEFORM 2D. Especially, the theoretical result of FE analysis on the first suggestion for forming a long-neck flange is verified by the experiment with aluminum 6063 pipes. From the theoretical and experimental results, it is concluded that three suggested processes are very useful in order to manufacture the pipe with a long-neck flange without any defects.

• 비파괴검사학회지
• /
• 제35권5호
• /
• pp.358-366
• /
• 2015

본 논문에서는 자주포, 전차 및 장갑차 등 지상궤도전투장비에 적용되는 비파괴검사 방안 검토 및 설계방안에 대해서 연구하였다. 비파괴검사 방안 중에서 지상궤도전투장비 비파괴검사자의 기량검증 요건은 미군규격에서 최초로 언급 되었으며, 이후 국내 지상궤도전투장비 무기 개발시 국방규격에도 적용되었다. 그러나 민 군 규격통일화사업을 통해 방산용 비파괴검사자의 자격은 기존 항공분야에서 적용중이던 NAS410이 항공/방산 공용규격으로 통합화 되었다. 본 연구에 대한 설계방안의 검증은 자주포에 사용되는 Al 단조품에 대해 최적설계된 액체침투탐상검사 방법을 적용하여 제품의 신뢰성 및 건전성을 확인하였다.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.83-89
• /
• 2019

In the conventional casting and forging method, there is a disadvantage that a mold is an essential addition, and a production cost is increased when a small quantity is produced. In order to overcome this disadvantage, a metal 3D printing production method capable of directly forming a shape without a mold frame is mainly used. In particular, overseas research has been conducted on various materials, one of which is a metal printer. Similarly, domestic companies are also concentrating on the metal printer market. However, In this case of the conventional metal 3D printing method, it is difficult to meet the needs of the industry because of the high cost of materials, equipment and maintenance for product strength and production. To compensate for these weaknesses, printers have been developed that can be manufactured using sand mold, but they are not accessible to the printer company and are expensive to machine. Therefore, it is necessary to supply three-dimensional casting printers capable of metal molding by producing molds instead of conventional metal 3D printing methods. In this study, we intend to reduce the unit price by replacing the printing method used in the sand casting printer with the FDM method. In addition, Ag paste is used to design the output conditions and enable ceramic printing.

• 의료법학
• /
• 제13권1호
• /
• pp.199-247
• /
• 2012

According to the review and analysis of medical cases that are assigned to the Supreme Court and all local High Court in 2011 and that are presented in the media, it was found that the following categories were taken seriously, medical and pharmaceutical product liability, the third principle of trust between medical institutions, negligence and causation estimation, responsibility limit, the meaning of medical records and related judgment of disturbed substantiation, Oriental doctors' duties to explain the procedures, IMS events, whether one can claim for each medical care operated by non-physician health care institutions to the nonmedical domain in the National Health Insurance Corporation, and the basis of norms for each claim. In the cases related to medical pharmaceutical product liability, Supreme Court alleviated burden of proof for accidents with medical and pharmaceutical products prior to the practice of Product Liability Law and onset the point of negative prescription as the time of damage strikes to condition feasibility of the specific situation. In the cases related to the 3rd principle of trust between medical institutions, the Supreme Court refused to sentence the doctor who has trusted the judgment of the same third-party doctors the violations of the care duty. With respect to proof of a causal relationship and damages in a medical negligence case, the Supreme Court decided that it is unjust to deny negligence by the materials of causal relationship rejecting the original verdict and clarified that the causal relationship shall not deny the reasons to limit doctors' responsibilities. In order not put burden on patients with disadvantages in which medical records and the description of the practice or the most fundamental and important evidence to prove negligence and causation are being neglected, the Supreme Court admitted in the hospital's responsibility for the case of the neonate death of suffocation without properly listed fetal heart rate and uterine contraction monitor. On the other hand, the Seoul Western District Court has admitted alimony for altering and forging medical records. With respect to doctors' obligations to description, the Supreme Court decided that it is necessary to explain the foreseen risks by the combination of oriental and western medicines emphasizing the right of patient's self-determination. However, questions have arisen whether it is realistically feasible or not. In a case of an unlicensed doctor performing intramuscular stimulation treatment (IMS), the Supreme Court put off its decision if it was an unlicensed medical practice as to put limitation of eastern and western medical practices, but it declared that IMS practice was an acupuncture treatment therefore the plaintiff's conduct being an illegal act. In the future, clear judgment on this matter should be made. With respect to the claim of bills from non-physical health care institutions, the Supreme Court decided to void it for the implementation of the arrangement is contrary to the commitments made in the medical law and therefore, it is invalid to claim. In addition, contrast to the private healthcare professionals, who are subject to redemption according to the National Healthcare Insurance Law, the Seoul High Court explicitly confirmed that the non-professionals who receive the tort operating profit must return the unjust enrichment and have the liability for damages. As mentioned above, a relatively wide range of topics were discussed in medical field of 2011. In Korea's health care environment undergoing complex changes day by day, it is expected to see more diverse and in-depth discussions striding out to the development in the field of health care.

• Asia pacific journal of information systems
• /
• 제22권3호
• /
• pp.1-27
• /
• 2012

Many companies have recently become interested in using social networking sites such as Twitter and Facebook as a new channel to communicate with their customers. For example, companies often offer "special deals" (e.g., coupons, discounts, free samples, etc.) to their customers who participate in promotions or events on social networking sites. Companies often make important announcements on their products or services on social networking sites. By doing so, customers are encouraged to continue to have relationships with companies on social networking sites and to recommend the companies' presence on social networking sites to other potential customers. Moreover, customers who keep close relationships with companies on social networking sites often provide the companies with valuable suggestions and feedback. For instance, Starbucks has more than 2 million followers on Twitter, and often receive suggestions and feedback for their product offerings and services from the followers on Twitter. Although companies realize potential benefits of using social networking sites as a channel to communicate with their customers, it appears that many companies have difficulty forging long-lasting relationships with customers on social networking sites. It is often reported that many customers who had followed companies on Twitter later stopped following them for various reasons. Therefore, it is an important issue to understand what motivates customers to continue to keep relationships with companies on social networking sites. Nonetheless, due attention has yet paid to this issue until recently. This study intends to contribute to our understanding on customers' intention to continue to follow companies on Twitter and to spread positive word-of-mouth about companies on Twitter. Specifically, we identify seven potential factors that customers perceive as important in evaluating their experience with companies on Twitter. The seven factors include similarity, receptivity, interactivity, ubiquitous connectivity, enjoyment, usefulness and transparency. We posit that the seven perception factors can affect the two types of satisfaction, emotional and cognitive, which can in turn influence on customers' intention to follow companies on Twitter and to spread positive word-of-mouth about companies on Twitter. Research hypotheses formulated in this study were tested with data collected from a questionnaire survey administered to customers who had been following companies on Twitter. The data was analyzed with the partial least square (PLS) approach to structural equation modeling. The results of data analysis based on 177 usable responses were generally supportive of our predictions for the effects of the seven factors identified and the two types of satisfaction. In particular, out results suggest that emotional satisfaction was strongly influenced by perceived similarity, perceived receptivity, perceived enjoyment, and perceived transparency. Cognitive satisfaction was significantly influenced by perceived similarity, perceived interactivity, perceived enjoyment, and perceived transparency. While cognitive satisfaction was found to have significant and positive effects on both continued following and word-of-mouth intentions, emotional satisfaction had a significant and positive effect only on word-of-mouth intention.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.310-313
• /
• 2009

오스테나이트계 고질소 스테인레스강 4 가지 후보강종인 HNS C1, C2, C3, C4에 대해 질소함량, 가압조건 따른 단조재와 온도 및 동일한 가압조건에서 Ni 합금원소 첨가유무에 따른 용체화 처리재(HNS C1, C3)의 물성평가와 실제 냉연 공정의 pass schedule 검증을 위한 모사실험을 통해 다음과 같이 요약 하였다. 1) 가압증가에 따른 질소함량의 증가로 강도 및 경도가 동시 상승하며, 결정립의 미세화 및 기계적 쌍정 발생이 많았다. 동일한 가압조건에서 Ni 첨가된 HNS C3가 Ni 미첨가한 HNS C1 보다 강도-연성 조합평가에서 열/냉간 가공성 등의 특성이 우수하였다. 2) 고질소강 스테인레스강의 적정한 용체화 처리온도 범위는 상용화된 AIS1304와 유사한 $1050^{\circ}C{\sim}1100^{\circ}C$이며, 용체화처리 후냉각방법의 변경(수냉과 공냉)에 따른 경도의 편차는 없었다. 냉연 pass schedule 검증을 위한 모사실험에서 초기 압연의 최적조건은 roll 속도 5mpm, pass당 압연율 $15{\sim}17%$였다.

• 헤리티지:역사와 과학
• /
• 제49권2호
• /
• pp.172-189
• /
• 2016

본 연구에서는 "오주서종박물고변(五洲書種博物考辯)", "천공개물(天工開物)" 등 고문헌에 기록된 오동 재료와 합금비, 주조 시설, 주조법 등을 확인하고 이를 기초자료로 활용하여 오동상감기법으로 장도를 제작하였다. 오동상감기법 장도 제작은 크게 오동 합금, 은땜 합금, 오동판과 은판 제작, 칼자루와 칼집 제작, 장도의 장석인 두겁 및 부속품 제작, 오동 상감, 조립의 순으로 진행하였다. 오동의 합금은 "오주서종박물고변"에 보이는 상품(上品)으로 전통방식의 진오동(眞烏銅) 합금비인 구리와 금을 20:1의 중량비로 하였다. 은땜의 합금은 상감된 문양에 사용한 경우 은과 황동(Cu 7 : Zn 3)을 중량비 5:1로, 단순 접합 사용한 경우에는 은과 황동을 중량비 5:2로 합금하여 은땜판을 제작하였다. 칼집과 칼자루 제작은 진오동 합금비로 만든 오동 괴를 풀림과 단조작업을 실시하여 오동판의 두께를 0.6mm로, 오동의 뒷면인 은판도 두께 0.6mm로 제작한 뒤, 오동판과 은판 접합, 풀림과 단조, 오동판에 문양 새기기, 은 상감하기, 오동판으로 칼집과 칼자루 모양잡기, 은땜으로 접합하기, 연마 및 광택내기 등의 과정을 거쳐 완성하였다. 붉은색의 오동판 표면을 검은색으로 부식시키는 '오동 살리기(발색하기)'는 오동 합금의 품위에 따라 발색 효과가 차이가 난다. 한지를 30일 정도 썩힌 인뇨(人尿)에 적셔 칼집과 칼자루 등에 감아 따뜻한 곳($25^{\circ}C$ 이상)에 두고 2~3시간이 경과하면 오동판의 겉면만 검은색으로 발색되고 은이 상감된 문양은 그대로 있어 오동상감기법을 재현할 수 있었다. 오동상감 복원에 사용했던 오동판, 은판, 은땜판의 합금성분과 오동의 표면 발색성분을 알기 위해 과학분석을 실시하였다. 오동 합금 분석(시료 2개)결과 고문헌 기록(Cu 95wt%, Au 5wt%)과 평균성분비가 유사한 Cu 95.57wt%, Au 4.16wt%과 차이가 있는 Cu 98.04wt%, Au 1.95wt%로 검출되었는데, 전자는 오동판 가공에 성공률이 높은 반면, 후자는 가공과정에서 터지는 등의 실패가 있었다. 오동판과 은판이 부착된 시료의 성분분석 결과 은판 부분은 Ag 100wt%로 검출되었고, 오동판과 은판이 접합된 부분은 Cu, Ag, Au가 모두 검출되어 접합이 잘 되었음을 확인할 수 있었다. 은과 황동을 합금한 은땜판은 분석결과 Ag 성분이 다양하게 검출되고 있어 성분비와 관계없이 매우 불균질하게 섞여있음을 관찰하였다. 오동판에 검은색으로 발색된 부분의 성분분석 결과 소지 금속에서 검출되지 않았던 S의 함량이 검출되어 S의 함량이 오동 색상에 영향을 미친 것으로 판단되었다. 향후 발색에 대한 정확한 메커니즘을 밝히기 위해서는 추가적인 화합물, 색도 및 재현 연구 등 추가연구가 필요하다. 이번 연구를 통해 시도 및 확인된 고문헌 속의 오동합금 실험 및 재현, 오동상감기법에 의한 장도제작, 오동판 검은색 발색 메커니즘의 과학 분석결과 등은 오동상감기법의 복원을 위한 중요한 기초자료로 활용될 수 있을 것이다.