• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.498-506
• /
• 2010

To use domestic softwood for structural lumber, appropriate grading system for quality, production and distribution condition of domestic lumber should be prepared. Kim et al. developed an automatic image processing system for grading domestic structural lumber (2009a and b). This study was carried out to investigate optimal image merging conditions for improving performance of image input system which is the key technique of image processing system, developed in the previous paper. To merge digital images of Korean larch lumber, choosing the green channel information of obtained image data showed the most accurate merging performance. As a pre-treatment process, applying Y-derivative Sharr's kernel filter could improve the image merging accuracy, but the effect of camera calibration was imperceptible. The optimal size of template image was verified as 30 pixel widths and 150 pixel heights. When applying the above mentioned conditions, the error length of images was 3.1 mm and the processing time was 9.7 seconds in average.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.417-430
• /
• 2020

The flame retardancy, such as carbonized length and area, of four plank type wood products by the spreading concentration and impregnation time of flame retardant were measured according to standard of the Nation Fire Agency in Republic of Korea. To measure the flame retardancy, Korean pine plywood, Japanese larch plywood, Japanese cypress planks, and perforated birch plywood boards were treated with self-development flame retardant by 300 and 500 g/㎡ spreading concentration and those were compared with control specimen. In general, the flame retardant performance of wood products improved as the spreading concentration of flame retardant increased. Except for Japanese larch plywood, there was no significant difference in the flame retardant performance by the spreading concentration. The flame retardant performance of perforated birch plywood board was positively correlated up to 60 minutes of impregnation time, but then gradually decreased. These results about the flame retardancy of wood products by spreading concentration and impregnation time were expected to be basic data for improving flame-retardant treated wood.

• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.32-35
• /
• 1963

There are 3 kinds of forest managements: One of them is forest utilization management which collects abundant forest resources by felling the trees: the second of them is scientific forest management which cultivates forest resources; and the last one is emergency aid forest management, needed by the forest resources davastation, for the surposes of soil conservation and preventing the indirect damages. During the 36 years of Japanese occupation, they pillaged 600 to 800 million cubic meters of the forest resources, in the condition of the colonial system. After the emancipation from the Japanese occupation, the national soil conservation work has been practiced for 18 years without correcting the Japanese forest management (which means felling system); therefore the essential in the forest, conservation works is to get rid of imitating the Japanese pillage management so as to turn the direction of the forestry policy to the emergency aid management which means forest investment.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.406-414
• /
• 2016

The lignin-based carbon nanofiber reinforced epoxy composite has been prepared by immersing carbon nanofiber mat in epoxy resin solution in order to evaluate the physical and mechanical properties. The thermal and mechanical properties of the carbon nanofiber reinforced epoxy composite were analyzed using thermogravimetric analysis (TGA), differential scanning calorimeter (DSC) and tensile tester. It was found that the thermal properties of the carbon nanofiber reinforced epoxy composite improved, with its glass-transition temperature ($T_g$) increased from $90.7^{\circ}C$ ($T_g$ of epoxy resin itself) to $106.9^{\circ}C$. The tensile strengths of carbon nanofiber mats made from both lignin-g-PAN copolymer and PAN were 7.2 MPa and 9.4 MPa, respectively. The resulting tensile strength of lignin-based carbon nanofiber reinforced epoxy composite became 43.0 MPa, the six times higher than that of lignin-based carbon nanofiber mats. The carbon nanofibers were pulled out after the tensile test of the carbon nanofiber reinforced epoxy composite due to high tensile strength (478.8 MPa) of an individual carbon nanofiber itself as well as low interfacial adhesion between fibers and matrices, confirmed by the SEM analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.537-545
• /
• 2009

The objective of this study was to investigate potential usage of environmentally friendly building materials, liquid mortar and dry cement mortar mixed with charcoal, based on the test of their physical and chemical properties. From the test results of physical and chemical properties of the liquid mortar mixed with charcoal, liquid mortar containing over 20% of charcoal, the consistency viscosity and the non-volatile content met a standard requirement. Drying time was delayed with increase in charcoal contents in the liquid mortar, however they were fully cured within 60 minutes in all treated levels. Other properties were acceptable at standard requirement. From the results, it was found that the proper charcoal addition level to the liquid mortar was 25%. In the results on dry cement, it was found that samples containing 5% of charcoal showed the maximum compressive strength, whereas samples containing over 20% of charcoal did not reach the minimum requirement of KS standard. Water retention ability constantly increased as the charcoal ratio increased. The conventional dry cement mortar adsorbed 59.5% of it, in the test of adsorption rate on ammonia gas, whereas cement mortar containing 10% of charcoal showed 71.6% of ammonia gas adsorption.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.202-210
• /
• 2018

This study was carried out to quantify degree of contribution of harvested wood product (HWP) on mitigation of climate change by valuation of public benefits, environmentally and economically. The potential carbon dioxide emission reduction of HWP was estimated by accounting carbon storage effect and substitution effect. Based on 2014 statistics of Korea Forest Service, domestic HWPs were sorted by two categories, such as wood products produced domestically from domestic and imported roundwood. The wood products were divided into seven items; sawnwood, plywood, particle board, fiberboard (MDF), paper (including pulp), biomass (wood pellet) and other products. The carbon stock of wood products and substitution effects during manufacturing process was evaluated by items. Based on the relevant carbon emission factor and life cycle analysis, the amount of carbon dioxide emission per unit volume on HWP was quantified. The amounts of carbon stock of HWP produced from domestic and from imported roundwood were 3.8 million $tCO_{2eq}$., and 2.6 million $tCO_{2eq}$., respectively. Also, each reduction of carbon emission by substitution effect of HWP produced from domestic and imported roundwood was 3.1 million $tCO_{2eq}$. and 2.1 million $tCO_{2eq}$., respectively. The results of this study, the amount of carbon emission reduction of HWP, can be effectively used as a basic data for promotion of wood utilization to revise and establish new wood utilization promotion policy such as 'forest carbon offset scheme', and 'carbon storage labeling system of HWP'.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.13-28
• /
• 2015

In accordance with importance of the economic value of forests and forest use, the paradigm of development and use has emerged as the dominant paradigm of forest policy. As forests are recognized as an important means of Wellness, the government pursues a policy convergence between forest use and conservation. So, this article analyzed whether the change of forestry convergence paradigm is reflected in policy or not. The purpose of this study was to analyze through content analysis and network analysis, whether the new combined text value are fused in how forest policy. According to the results, the function of utilization which is off the traditional forestry industry and recreation, wellness are acquired a greater importance in the 5th plan than 4th plan. But the 5th plan is insufficient to establish of foundation for forestry management and welfare functions. The evidence suggest a sign of sustained paradigm convergency in forest policy of Korea. As the policy implication in establishing national forest master plan, it is necessary to strengthen policy capability to pursue sustainable forestry utilization, which can converge forest use and conservation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.53-61
• /
• 1999

This study was conducted to determine the optimal collecting time and methods of utilization of forest topsoil as a seed-bank source for revegetation materials of slopes. From April to November of 1998, nursery seedbeds in the greenhouse of Seoul National University were seeded with mixtures of forest topsoil and seeds. The nursery seedbeds were treated to evaluate the effect of depths of forest topsoil and seeding amounts. Seasonal experiments with $3{\times}3$ factorial design were conducted in April, June and August. More than 40 seedlings/$m^2$ were observed as the naturally-emerged species in the plot, treated with the top-layer forest soil within the depth of 10cm. However, it was found, as seeding more seeds, the number of appearance of the naturally-emerged species reduced because of the heavy competition between the seeded and the naturally-emerged. According to the results of this research, it is recommended that seeding amount should be no more than 1,000 seeds/$m^2$ to avoid the severe competition. Also it was observed that the forest topsoil collected in spring(April) is better than that collected in summer. The more species of the naturally-emerged were found in the forest topsoil collected in spring. Forest-topsoil-mixed-materials as a seed-bank source could significantly increase the plant diversity and productivity. Effective use of forest topsoil as a seed-bank source may become a valuable tool in future restoration of disturbed slopes for promoting plant community diversity and recycling of spoiled-soils from the slopes.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.377-382
• /
• 2021

In order to advance forest resource management, it is necessary to solve problems such as the aging of forest-related industry workers and the field investigation system centered on manpower. Therefore, in this study, the trend of establishment and utilization of overseas forest geospatial information applied with the latest technology for scientific forest resource management was investigated to identify the domestic application plan. Overseas, photogrammetry and LiDAR technologies were being used to construct and utilize forest geospatial information. In the case of photogrammetry, it was used to measure the volume of vegetation, diameter, and tree height. And LiDAR technology has been applied to the measurement of diameter, and tree height. Through the analysis of overseas cases, it was identified how to construct forest geospatial information using photogrammetry and LiDAR, and it was found that LiDAR showed higher accuracy than photogrammetry. In the future, if the construction of forest geospatial information using various LiDAR sensors are performed and the accuracy and work efficiency are analyzed, it will be possible to present the possibility of using new technologies in the construction of forest geospatial information in Korea.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.1-8
• /
• 2004

Linerboards and corrugating mediums are being produced using recycled old corrugated containers (OCC) as major raw materials. The utilization rate of recycled fibers is ex­pected to increase further in the future to reduce raw material cost. Use of recycled fibers as raw materials for linerboard, however, causes many problems for papermakers. As the utilization rate of recycled fiber and number of recycling of fibers increases, quality and process problems including strength reduction and deterioration of machine runn­ability will increase. To overcome the problem of strength reduction associated with the use of recycled fibrous materials for producing quality linerboards, diverse extensive research efforts and new technological approaches have been taken. In this study, disintegration characteristics of aee was evaluated by determining the unslushed contents. The amount of unslushed content of KOCC was lower than AOCC. But contaminants content of KOCC was higher than AOCC. As the consistency in disintegration increased, the amount of unslushed fiber content decreased.