• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.512-514
• /
• 2005

Accurate DEM surface of forest floor is very important to extract any meaningful information regarding forest stand structure, such as tree heights, stand density, crown morphology, and biomass. In airborne lidar data processing, DEM data of forest floor is mostly generated by interpolating those elevation points obtained from last laser returns. In this study, we try to analyze the property of the last laser return under relatively dense forest canopy. Airborne laser data were obtained over the study area in relatively dense pine plantation forest. Two DEM data were generated by using all the points in the last laser returns and using only those points after removing non-ground points. From the preliminary analysis on these DEM data, we found that more than half of points among the last laser returns are actually hit from canopy, branches, and understory vegetation that should be removed before generating the surface DEM data.

• Journal of Ecology and Environment
• /
• v.35 no.2
• /
• pp.99-109
• /
• 2012

Litterfall dynamics in forests are assessed by estimating biomass production and decomposition. However, there have been few studies on how litter dynamics impact the health and management of ecosystems. Here, a new approach to measure and assess ecosystem function is presented based on conventional methods using littertraps, litterbags, and the mass on the forest floor. To assess the status of litter dynamics, the decay rate (k) was estimated from a litterbag experiment, and removal rates ($k_i$) were determined from mass balance on the forest floor at 21 sites on three mountains in South Korea. The $k_3$ (organic mass ratio of $O_i$ and $O_e+O_a$ + A horizons in November) values in an equilibrium state in South Korea were within the range of $k{\pm}0.174$ when considering the annual variation of litterfall production. This study also suggests that sampling sites for these types of studies should be in the middle, not at the ends, of steady slopes on the forest floor.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.53-65
• /
• 1992

For elucidating effective methods of restoration of forest recreational sites where management goals are maintaining naturalness and conserving natural ecosystem, seeding, fertilization and soil surface treatment were used for four years at the devastated forest-floor. For restoration of forest-floor vegetation, factorial experiment was used with a split plot design(main plot : fertilization, subplot : soil surface${\times}$seeding) and a randomized complete block design (fertilization${\times}$seeding) at the Kwanaksan Aboretum, Anyang, Kyonggido. Results were summarized as follows : Soil surface softening with tipping and ripping and straw-mat mulching (70% coverage) treatment was effective on germination, survival and growth of seeded vegetation at devastated forest-floor. Especially, straw-mat mulching treatment was effective on soil surface stabilization and seedling's survival at eroded soil surface, while complete soil surface softening treatment was effective on germination, survival and early growth of tree species of late-successional series. Introducing seeds of native species of pioneer or early-successional series, with good growth capability in barren soil was effective on rapid restoration in devastated forest-floor with its soil surface previously compacted and its surviving seeds washed away. When the seeding and straw-mat mulching after partial soil surface softening with tipping and ripping treatment were employed, it took about three years to restore the devastated forest-floor where surface erosion had been undertaken for an extended period of time and where naturally surviving seeds of native species had been washed away. Softening treatment of soil surface was effective for about two years, and seeding and soil surface treatment increased number of seedlings and improved soil surface environment through fixing of movement of the fallen leaves. Fertilizing effect was not oberserved, mainly due to seeding exposure and poor physical condition including soil surface erosion, low soil water potential and drought, etc, at the field experimental site. However, application of nitrogen and phosphate fertilizers was effective on seedling survival of the species in late-successional series, while lime application adversely affected the seedling survival.

• Journal of the Korean housing association
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2008

This study is an attempt to understand the floor-specific characteristics of facade road traffic noise in apartment buildings. For this purpose, it sampled a total of seven roadside apartment building complexes: three with no soundproof bar barrier installed at roadside, one with a forest buffer zone, one with a sound-absorbing hill, and two with soundproof barriers. The measured noise level was highest on the 5th floor of apartment buildings with no soundproof barrier, and the upper stories from the 5th floor showed lower-noise measurements in order. For apartment buildings with soundproof barriers, however, the noise level was lower on the 10th floor than the 5th floor. Two apartment building groups--one with a sound-absorbing hill and the other with no soundproof barrier--showed similar measurement results in the floor-specific characteristics of facade road traffic noise. This suggests that such installations have little sound insulation effect. In the apartment building complex with a forest buffer zone around it, a slight sound insulation effect was measured on the lower floors of the buildings.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.473-479
• /
• 1994

This study was carried out to get the basic data for obtaining water resources continuously. Water storage of forest land was estimated by effective water storage based on classifying soil pore. The results were summarized as follows ; 1. Percentage of coarse pores were in the order : Forest>Bare land>Grasses. As soil depth increased, total pores, coarse pores, and maximum water content were decreased, while fine pores increased. 2. Soil pore percentage and physical properties of surface layer(0~20cm) were significantly different among forest floor conditions. However, there were no difference in soil pore percentage and physical properties in 20~40cm and 40~60cm according to forest floor conditions. In the same plot, on the other hand, soil pore percentage and physical properties were significantly different between surface layer(0~20cm) and 20~40cm, but there were no differences between 20~40cm and 40~60cm. 3. Effective water storage was highly correlated with coarse pore in all plots. 4. The model for water storage capacity of each forest floor condition expressed by effective water storage was produced using coarse pores and soil depth.

• The Korean Journal of Ecology
• /
• v.28 no.6
• /
• pp.347-351
• /
• 2005

The amounts of organic carbon and several nutrients in litterfall on the forest floor of Quercus mongolica forest were assessed for two years from 1998 through 2000 in Mt. Songnisan National Park in Korea. The amounts of organic carbon (C) in litterfall were the highest in autumn with the values of $150.4g/m^2$ (62.6%) in 1998 and $219.2g/m^2$ (61.0%) in 1999. In winter, organic C was the lowest with the values of $16.3g/m^2$ (6.8%) in 1998 and $12.5g/m^2$ (6.7%) in 1999. It was estimated that the organic C added to forest floor via litterfall was 240.1 $g{\cdot}m^{-2}yr^{-1}$ and 186.6 $g{\cdot}m^{-2}yr^{-1}$ 1998 and 1999, respectively. The amounts of nitrogen (N) in litterfall were the highest in autumn with the values of 5.9 $g/m^2$ (58.0%) in 1998 and 5.2 $g/m^2$ (62.3%) in 1999. The amount of phosphorus (P) in litterfall showed its peak in autumn with 0.19 $g/m^2$ (52.9%) in 1998 and 0.11 $g/m^2$ (52.6%) in 1999. The amount of P returned to forest floor via litterfall was 0.35 $g{\cdot}m^{-2}yr^{-1}$ in 1998 and 0.22 $g{\cdot}m^{-2}yr^{-1}$ in 1999. The amount of potassium (K) in litterfall showed its peak in autumn with 0.57 $g/m^{2}$ (53.8%) in 1998 and 0.42 $g/m^2$ (55.3%) in 1999. The amounts of K returned to forest floor via litterfall was 1.11 $g{\cdot}m^{-2}yr^{-1}$ in 1998 and 0.81 $g{\cdot}m^{-2}yr^{-1}$ in 1999.

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.281-285
• /
• 2007

We conducted research to determine the effects of forest tending works (FTW) on forest carbon (C) storage in Korean red pine forests by estimating changes in the quantity and distribution of stored organic C in an approximately 40-year-old red pine stand after FTW. We measured organic C storage (above- and belowground biomass C, forest floor C, and soil C at 50 cm depth) in the Hwangmaesan Soopkakkugi model forest in Sancheonggun, Gyeongsangnam-do before and after the forest was thinned from a density of 908 trees/ha to 367 trees/ha. The total C stored in tree biomass was 69.5 Mg C/ha before FTW and 38.6 Mg C/ha after FTW. The change in total C storage in tree biomass primarily resulted from the loss of 19.9 Mg C/ha stored in stem biomass after FTW. The total C pool in this red pine stand was 276 Mg C/ha before FTW and 245.1 Mg C/ha after FTW. Prior to FTW, 71.5% of the total C pool was stored in mineral soil, 25.2% in tree biomass, and 3.3% in the forest floor, where as after FTW 80.5% of the total C pool was stored in mineral soil, 15.7% in tree biomass and 3.7% in the forest floor. These results suggest that the development of site-specific tending techniques may be required to minimize the loss of tree biomass C storage capacity in red pine stands from FTW.

• Journal of the Korea Furniture Society
• /
• v.20 no.5
• /
• pp.480-489
• /
• 2009

This study was carried out to develop the core technology for the manufacturing the flat floor panel with the bamboo grown in Damyang region maintaining its indigenous merits. Using capital bamboo(Phyllostachys bambusoides) of Damyang with superior physical and working properties, Authors have standardized the core technologies for the integrated production of flat floor panel using this superior bamboo i.e, washing, splitting, flattening, blasting, and overlaying over plywood. It is expected to increase the income from bamboo forest and to enhance the image of the eco-city, Damyang with this technological development. Additional quality assuring test and economical analysis for the industralization as building material will be performed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.1
• /
• pp.51-61
• /
• 1993

Seeding treatment was used for 2 years at an artificial bare ground for selecting tree species suitable for forest-floor revegetation. 2 ${\times}$2${\times}$2 factorial experiment was used with a randomized complete block design for 19 native tree species and results were summarized as follows; 1. Native species suitable for restoration of bareland under 75% shading in central part of Korea were Styrax japonica, Styrax obassia, Smilax china, Callicarpa japonica, Stephanandra incisa, Viburnum dilatatum for. pilosulm, Magnolia sieboldii, Cornus kousa, Celastrus orbiculata, etc.. Especially, Magnolia sieboldii, Stephanandra incisa and Stryrax obassia were tolerant for forest-floor with hardened woil surface and Callicarpa japonica, Viburnum dilatatum for. pilosulum, Euonymus sieboldianus and Philadelphus schrenkii were suitable for softened soil surface with straw-mat mulching. 2. It is necessary to break seed dormancy to accelerate germination in case of Styrax obassia, Styrax japonica, Viburnum dilatatum for. pilosulum, Smilax china and Stephanandra incisa.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.