• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1031-1034
• /
• 2005

This paper introduces a novel sensor network protocol, R-WSLP(Realtime Wireless Sensor Line Protocol), which has extremely low latency characteristic in large-scale WSN. R-WSLP is proposed to implement realtime forest fire monitoring system. We propose Distributed TDMA method for the multiple channel access and Time Synchronized Forwarding Mechanism instead of routing technique to achieve low latency network. Also, R-WSLP provides extremely low power operation which we accomplished by reducing idle listening. In our experimentation, we get successful results at the forest fire monitoring system with our protocol.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1119-1126
• /
• 2002

In this paper, we propose two predictive spatial data mining based on spatial statistics and apply for predicting the forest fire hazardous area. These are conditional probability and likelihood ratio methods. In these approaches, the prediction models and estimation procedures are depending un the basic quantitative relationships of spatial data sets relevant forest fire with respect to selected the past forest fire ignition areas. To make forest fire hazardous area prediction map using the two proposed methods and evaluate the performance of prediction power, we applied a FHR (Forest Fire Hazard Rate) and a PRC (Prediction Rate Curve) respectively. In comparison of the prediction power of the two proposed prediction model, the likelihood ratio method is mort powerful than conditional probability method. The proposed model for prediction of forest fire hazardous area would be helpful to increase the efficiency of forest fire management such as prevention of forest fire occurrence and effective placement of forest fire monitoring equipment and manpower.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.450-453
• /
• 2005

A forest fire occurs mainly as natural factor such as wind, temperature or human factor such as light. Recently, the most of forest fire prevention is prediction or prevision against forest fire by using remote sensing technology. However in order to forest fire prevention, the remote sensing has many limitations such as high cost and advanced technologies and so on. Therefore, we need to multisensor integration system that utilize not only remote sensing but also in-situ sensing in order to reduce large damage of forest fire though analysis of happen cause and prediction routing of occurred forest fire. In this paper we propose a multisensor integration system that offers prediction information of factors and route of forest fire by integrates collected data from remote sensor and in-situ sensor for forest fire prevention. The proposed system is based on wireless sensor network for collect observed data from various sensors. The proposed system not only offers great quality information because firstly, raw data level fuse different format of collected data from remote and in-situ sensor but also accomplish information level fusion based on result of first stage. Offered information from our system can help early prevention of factor and early prevision against occurred forest fire which transfer to SMS service or alert service into monitoring interface of administrator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1581-1586
• /
• 2016

In this paper, we propose a central disaster monitoring system of the forest fire. This system provides the safe-zone and detection to reduce the suppression efforts. In existing system, it has a few providing the predicting of wildfire spread model and speed through topography, weather, fuel factor. This paper focus on the forest fire diffusion model and predictions of the path identified to ensure the safe zone. Also we have considering the forest fire of moving direction and speed for fire suppression and monitering. The proposed algorithm could provide the technique to analyze the attribute information that temperature, wind, smoke measured over time. This proposed central observing monitoring system could provide the moving direction of spred out forecast wildfire. This observing and monitering system analyze and simulation for the moving speed and direction forest fire, it could be able to predict and training the forest fire fighters in a given environment.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.105-110
• /
• 2008

Unmanned helicopter has several abilities such as vertical take off, hovering, low speed flight at a specific altitude. Such vehicles are becoming popular in actual applications such as search and rescue, aerial reconnaissance and surveillance in the case of a large size disaster and forest fire. In this paper, a flight control system was designed for an unmanned helicopter. This paper was concentrated on describing the systematic design, electronic equipments and their interconnections for realizing the autonomous flight and aerial monitoring. A study on the autonomous waypoint navigation and altitude control performance were performed and tested on a test unmanned helicopter and the performance and the feasibility were represented.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.4
• /
• pp.25-32
• /
• 2008

The prevention of disasters in cultural property is very important management and historical duties. The reason can't be measured values with monetary scale of our contemporary. Therefore, this paper was considered fire-safety as one of terrible threat-disasters about the wooden buildings. This research deal with 47 cases cultural property wooden building by whole investigation(field survey and interview) in Gangnung province. The most buildings have basic fire extinguisher; ABC powder. A few buildings are rarely installed fire extinguishing equipments; outdoor fire hydrant, heat sensor, ground sprinkler, CO2-hose-reel. But these state is very insufficient for the fire-safety in cultural property wooden buildings. Specially as particular attention in province, forest fire of regional characteristic have close relation with cultural property fire. The majority of factor against forest and building fire is to provide monitoring and security system; CCTV, Fence, Sensor, Alarm and paid guard man against incendiary. Ultimately it is necessary to construct comprehensive disaster prevention system with the organic cooperation such as National Emergency Management Agency, Cultural Heritage Administration, Forest Service, local government officials and regional citizen.

• Fire Science and Engineering
• /
• v.21 no.1 s.65
• /
• pp.60-68
• /
• 2007

In order to guide the safe extinguishment duty of forest fire ground fighting team and acquire its exact location information in case of a large scale of forest fire, it is very important to monitor the real time coordination data the forest fire ground fighting team. In this study the guidance for safe extinguishment duty of forest fire ground fighting team could be provided by monitoring the current location information and moving route information, which are received form GPS through CDMA (Code Division Multiple Access).

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.3
• /
• pp.1-18
• /
• 2024

The study aims to establish a direction for forest ecological restoration by classifying forest types and understanding the ecological characteristics of the Uljin forest area damaged by a large fire in 2022. Hierarchical cluster analysis and indicator species analysis were conducted on 78 survey plots located in the forest fire-affected area, and four forest cover types were derived: P. densiflora pure forests, P. densiflora dominant forests, mixed broad-leaved forests, and Q. variabilis dominant forests. As a result of visually comparing changes in forest types before and after forest fire damage, by classifying data according to whether or not upper dead trees are included, it was confirmed that pine forests, which have a high proportion of pine trees, spread widely due to forest fire damage. However, broad-leaved mixed forests and oyster oak dominant forests showed characteristics of maintaining concentration, indicating that pine forests were severely damaged. As a result of the important value analysis, during the process of natural recovery after a forest fire, the species that appear early in the lower layer are the sprouts of existing species such as Quercus mongolica Fisch. ex Ledeb., Quercus variabilis Blume, Fraxinus sieboldiana Blume, Rhododendron mucronulatum Turcz. The distribution of diameter at breast height by forest cover type showed that among areas with extreme forest fire damage, the proportion of dead trees was relatively high and structural changes were large in P. densiflora pure forests and P. densiflora dominant forests where pine trees had a high distribution ratio. However, if continuous monitoring is carried out in the future with reference to the results of this study and plant data is collected and analyzed from a mid- to long-term perspective, it is believed that it will be used as useful data to promote forest ecological restoration projects in forest fire-affected areas.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.3
• /
• pp.33-43
• /
• 2022

This study was conducted to monitor the vegetation recovery in the areas damaged by the forest fires on the east coast that occurred in April 2000. The study site was a forest fire-damaged area in Samcheok-si, Gangwon-do, and 21 monitoring areas (12 natural restoration sites, 9 artificial restoration sites) were selected to analyze the vegetation recovery trend since 1998. The vegetation recovery trend was compared by calculating the values according to the year using the difference Normalized Burn Ratio (dNBR) and Normalized Difference Vegetation Index (NDVI) based on satellite images (Landsat TM/ETM+ and Sentinel-2A). As the result of this study, all 21 sites, vegetation was recovered, and both groups showed the greatest recovery in summer. In the case of the dNBR, the artificial restored sites showed higher values than the natural restored sites, and in the case of the NDVI, the natural restored sites were higher than the artificially restored sites in summer and autumn. However, the difference between the two groups of natural and artificial restoration sites was not significant. Therefore, the direction of forest restoration after forest fire damage can be effectively restored if properly implemented for the purpose of restoration of the target site.