• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.3
• /
• pp.98-105
• /
• 2009

The objective of this study is to develop numerical simulation model for analysing the wind speed reduction effect by coastal forest belts. The horizontally homogeneous turbulent flow equations, which are derived from the Reynolds-averaged Navier-Stokes method, both above the tree canopy and within the canopy were first formulated, and a first-order closure scheme with the capability of accounting the bulk momentum transport term within the canopy was employed. The averaged equations were solved numerically by finite difference method, FTCS (forward time centered space) scheme. The proposed model was also used to numerically investigate the effects of structural characteristic of forest belt on the wind speed. The effects of maximum leaf area density were evaluated, with the leaf area density of $1.0m^2/m^3$, $2.0m^2/m^3$, $3.0m^2/m^3$, and $4.0m^2/m^3$. Vertical distributions of leaf area, both uniform and varied distribution with a height, were also considered. A comparison of wind profile indicated that there was in good agreements between simulated and measured wind speed. Also, the results showed horizontal wind speed decreased under a height of the tree with increasing maximum leaf area density. In conclusion, in applications where computational efficiency and simplicity are desirable, the proposed numerical model has of great capability to determine the vertical turbulent momentum transport and wind profile in the costal forest belt.

• Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2017

Background: Though the biomass of floral vegetation in understory plant communities in a forested ecosystem only accounts for less than 1% of the total biomass of a forest, they contain most of the floral resources of a forest. The diversity of understory honey plants determines visitation rate of pollinators such as honey bee (Apis mellifera) as they provide rich food resources. Since the flower visitation and foraging activity of pollinators lead to the provision of pollination service, it also means the enhancement of plant-pollinator relationship. Therefore, an appropriate management scheme for understory vegetation is essential in order to conserve pollinator population that is decreasing due to habitat destruction and disease infection. This research examined the diversity of understory honey plant and studied how it is related to environmental variables such as (1) canopy density, (2) horizontal heterogeneity of canopy surface height, (3) slope gradient, and (4) distance from roads. Vegetation survey data of 39 plots of mixed forests in Chuncheon, Korea, were used, and possible management practices for understory vegetation were suggested. Results: This study found that 113 species among 141 species of honey plant of the forests were classified as understory vegetation. Also, the understory honey plant diversity is significantly positively correlated with distance from the nearest road and horizontal heterogeneity of canopy surface height and negatively correlated with canopy density. Conclusions: The diversity of understory honey plant vegetation is correlated to vegetation structure and human impact. In order to enhance the diversity of understory honey plant, management of density and height of canopy is necessary. This study suggests that improved diversity of canopy cover through thinning of overstory vegetation can increase the diversity of understory honey plant species.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.173-180
• /
• 2008

Diurnal variation of the flow over a forest canopy on a mountain slope is simulated numerically. In the daytime, the earth surface is heated by the solar radiation and the flow goes up the mountain due to the buoyancy force, and during the night, the air is drained downward along the slope owing to the cooling of the surface by radiation. In this flow process the forest canopy that consists of leaf region and the trunk region plays a dominant role as a momentum sink to the flow, thus the modeling of the leaf area region and trunk region is critical to the successful flow simulation. In the present study, a field measurement in an experimental forest in the State of Oregon in the United States is numerically analyzed. The resistance to the flow in the leaf region is directly related to the leaf area density (LAD), and the trunk is modeled as a cylinder.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.227-234
• /
• 2007

The forest canopy gap has been well known as a substantial process of forest cyclic regeneration and important role in stand structure, dynamics, and biodiversity of the forest ecosystem. Based on 3,600 $5m{\times}5m$ square grids in a 9ha permanent experimental plot, the study was conducted to evaluate the regeneration pattern of woody species by developmental stage {seedlings (<1 m of height), saplingI (>1 m of height, <2 cm of DBH), and saplingII (2 cm$<200m^2$), $201-400m^2$, $400-600m^2$, $601-800m^2$, and $>800m^2$) in the mixed broadleaved-Korean pine forest. The results indicated that the regenerating trees of Populus ussuriensis occurred only in the canopy gap area, considered to be a typical gap-dependent species. The regeneration of Ulmus japonica, Ulmus laciniata, and Maackia amurensis could be generally satisfied with the gap size of $201-600m^2$, Betula costata and Prunus padus with gap size of $401-800m^2$, Picea koraiensis with gap size of $201-800m^2$, Fraxinus mandshurica and Syringa reticulata var. mandshurica with smaller than $800m^2$, respectively. Acer ukurunduense and Acer tegmentosum were likely to have no problem with the gap size to make gap regeneration. Acer mono and Tilia amurensis looked more capable of regenerating in the closed canopy disregarding the upper crown condition. The regeneration of Pinus koraiensis and Abies nephrolepis had no trouble under the canopy condition in less than $800m^2$of gap size. The density of regenerating shrubs was rather high, especially under the closed canopy, considered to be associated with great amount of regeneration production in such shade tolerant species as Lonicera maackii, Corylus mandshurica, Euonymus pauciflorus, and Philadelphus schrenkii under the closed canopy. Pearson correlation coefficient was computed to compare the similarity among non-gap area and five gap size classes by developmental stages for trees and shrubs. The similarity coefficients among closed canopy and the gap size classes were mostly significantly correlated to each other with a few exceptions.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.328-330
• /
• 2003

The land cover of burned area has changed dramatically since Daxinganling forest fire in Northeastern China during May 6 ? June 4, 1987. This research focused on determining the burn severity and assessment of forest recovery. Burned severity was classified into three levels from June 1987 Landsat TM data acquired just after the fire. A regression model was established between the forest canopy closure from 1999 forest stand map and the NDVI values from June 2000 Landsat ETM+ data. The map of canopy closure was got according to the regression model. And vegetation cover was classified into four types according to forest closure density. The change matrix was built using the classified map of burn severity and vegetation recovery. Then the change conversions of every forest type were analyzed. Results from this research indicate: forest recovery status is well in most of burned scars; and vegetation change detection can be accomplished using postclassification comparison method.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.83-91
• /
• 2012

Crown density, which is defined as the proportion of the forest floor concealed by tree crown, is important and useful information in various fields. Previous methods of measuring crown density have estimated crown density by interpreting aerial photographs or through a ground survey. These are time-consuming, labor-intensive, expensive and inconsistent approaches, as they involve a great deal of subjectivity and rely on the experience of the interpreter. In this study, the crown density of a forest in Korea was estimated using KOMPSAT-2 high-resolution satellite images. Using the image segmentation technique and stand information of the digital forest map, the forest area was divided into zones. The crown density for each segment was determined using the discriminant analysis method and the forest ratio method. The results showed that the accuracy of the discriminant analysis method was about 60%, while the accuracy of the forest ratio method was about 85%. The probability of extraction of candidate to update was verified by comparing the result with the digital forest map.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.642-645
• /
• 2007

Mounted in aircraft, LiDAR (Light Detection And Ranging) technology uses pulses of light to collect data about the terrain below. The main objective of this study was to extract reliable the individual tree and analysis techniques to facilitate the used LiDAR data for estimating tree crown diameter by measuring individual trees identifiable on the three dimensional LiDAR surface. In addition, this study can be quantitative analysis of individual tree through the canopy parameter.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.1
• /
• pp.45-62
• /
• 2010

Zero plane displacement (d) is the elevated height of the apparent momentum sink exerted by the vegetation on the air. For a vegetative canopy, d depends on the roughness structure of a plant canopy such as leaf area index, canopy height and canopy density, and thus is critical for the analysis of canopy turbulence and the calculation of surface scalar fluxes. In this research note, we estimated d at the Gwangneung coniferous forest by employing two independent methods of Rotach (1994) and Martano (2000), which require only a single-level eddy-covariance measurement. In general, these two methods provided comparable estimates of $d/h_c$ (where $h_c$ is the canopy height, i.e., ~23m), which ranged from 0.51 to 0.97 depending on wind directions. These estimates of $d/h_c$ were within the ranges (i.e., 0.64~0.94) reported from other forests in the literature but were sensitive to the forms of the nondimensional functions for atmospheric stability. Our finding indicates that one should be careful in interepreation of zero plane displacement estimated from a single-level eddy covariance measurement that is conductaed within the roughness sublayer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.2
• /
• pp.148-156
• /
• 1995

This study was conducted to investigate the actual vegetation and plant community structure of the urban forest in Kwangju Metropolitan City. Thirty eight plots in the urban forest were set up by the clumped sampling method. The degree of green naturality, 6 that is artifical planting area covered 10.9% in Kwangju Metropolitan City and Pinus densiflora community covered 48.7% of the actual vegetations of urban forest. Canopy height, Diameter of breast height (DBH) and No. of species in urban forest were 13.5m, 21cm and 24 species, respectively. The soil conditions and community structure of the urban forest were differenced by location of urban and suburban area. The plant communities divided into six groups which were Quercus acutissima community, Q. acutissima-Robinia pseudo-acacia community, Pinus rigida Community, P. rigida-P. densiflora community, P. densifrora-Q. acutissima community and Q, serrata-P. densiflora community. Successional series of the urban forest in the surveyed area were proceeding from P. dinsiflora to Quercus species. The species diversity of plant were high in natural plant community but low in artificial plant community. Tree density in the canopy layer varied from 600ea/ha to 2,800ea/ha.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.621-627
• /
• 2006

This study was conducted to understand the pattern and characteristics of seed rain in the broadleaved-Korean pine mixed forest. We established 287 $0.5m^2$ circular seed traps and collected and identified fallen seeds in the traps every two weeks in $150m{\times}150m$ sample plot of the permanent nine hectare of experimental plot in 2005. The overall average density of seed rain was $864.2/m^2$. The seeds of Betula costata Betula costata had the highest number of fallen seeds as $676.0/m^2$ (78.2%), followed by Abies nephrolepis as $57.5/m^2$, B. platyphylla as $37.9/m^2$, Tilia amurensis as $32.2/m^2$, Acer ukurunduense as $17.0/m^2$, A. tegmentosum $14.8/m^2$, and so on. Pinus koraiensis was recorded only $2.5/m^2$ of fallen seeds mainly owing of Korean pine had low rate of purity due to the animal and microbiological predation. Most of seed dispersal have started from the middle to late August and come to an end on the middle of November. The peak time of seed dispersal varied depending on the species. The rate of pure seed by dispersal time varied according to the species, thereupon the aspect of predation and the rate of blasted seed which had influence on the rate of purity also varied according to the species. The density of Korean pine seed rain in the forest gap was significantly different at $P{\leq}0.05$ from in the closed canopy. But the other species had no difference among canopy coverage.