• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.291-300
• /
• 1996

This study is to determine the biomechanical characteristics of Korean. Male 58 and Female 54 were participated for the measurement which was performed by immersion method and reaction board method. Body parts were head with neck, trunk, upper arm, forearm, hand, thigh, leg, and foot. Their volumes were measures by immersion method. Their weight were determined by using Dempster(1995), Drills and Contini(1969) density data. Each center of body part weight were determined by specific posture on the reaction board. The postures were asked to the subject forearm- lifted posture, total let- lifted posture, foot-lifted posture. According to each posture, the center of each part were calculated.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.151-162
• /
• 1990

Occupational disease among typists such as Carpal Tunnel Syndrome(CTS) and tendonitis has increased along with rapid expansion of office automation. During typing, the posture can be defined as forearm pronation, ulnar abduction, wrist extension and finger flexion. The CTS results from awkward posture between forearm-wrist-hand and the keyboard arrangement. Therefore, ergonomic principles should be emphasized in keyboard design. The objective of the study is to improve keyboard design by analyzing anatomical posture of forearm and hand during typing. An experimental study was performed to investigate relationships between a keyboard and typing performance. Results showed that typing performance is dependent to angles and slopes of a keyboard. Statistical analysis indicated that the suggested ergonomic keyboard improved typing speed significantly(17%).

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.1
• /
• pp.1406-1412
• /
• 2018

This study aimed to measure the grip strength of the dominant and non dominant hands of right-handed normal adults in the supination, pronation, and neutral positions of the forearms. The subjects of this study were instructed to make the standard posture suggested by the American Society of Hand Therapists (ASHT) in order to minimize the impact of changes in the posture of the body as follows. The grips strength was statistically different between groups (p<.05). In the follow up test using Scheffe test, the grips in the neutral position and supinator position did not show any difference, while the grip in the pronation was smaller than those of the above two other positions. The grips of the mainly used forearm and non-mainly used forearm of the study target did not show any statistically significant difference in the neutral, supinator and pronation positions of the forearm. This study is expected to provide basic information for studying the impact of the positions of the forearms on grip strength, assessing the prehensility of patients in clinical settings, and setting therapeutic goals.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.405-411
• /
• 2013

Objective: Product design process without considering the strength of the user can cause the excessive burden on musculoskeletal system of human body. Since the muscle strength will vary depending on the body posture, the design of product should consider the characteristics of body posture. This study was performed to investigate the effects of forearm postures on the push and pull strength. Background: Overexerted force has been identified to cause musculoskeletal disorders. It is important to know the push and pull strength exerted by human when designing so that exerted force does not exceed the safety limits. Method: Maximum isometric push and pull strength of left, right and both hands were measured according to forearm postures with pronation, neutral and supination. For the study, 66 male and 30 female undergraduate students were participated as subjects. All subjects were normal and healthy with no clinical history. Results: The results showed that the push strength of male and female were 93.3% and 85.4% of pull strength. It showed that the strength of one-hand was 72.1~81.0% of the strength of two-hands, and the strength of left hand was 93.1~95.8% of the strength of right hand. The strength of female was 62% of the one of male. It was found that the strength with pronation $90^{\circ}$ was reduced up to 20% compared to the strength with neutral posture. Conclusion: Push and pull strength of male and female were reduced when forearm was rotated extremely. Application: The results of this study will be used for the prevention of work related musculoskeletal disorders and design of industrial equipment.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2023

Purpose: The aim of this study is to provide basic information to create an efficient training program to improve shoulder stability and function in patients with injuries and in patients having undergone surgery of the supraspinatus and infraspinatus muscles, which have a relatively high incidence of injury in shoulder joint disease. Further, independent activities of the supraspinatus and infraspinatus muscles were investigated according to forearm rotation and the neutral and lateral rotation postures. Methods: The activities of the supraspinatus and infraspinatus muscles were measured using surface electromyography in 22 healthy adults in Busan, and isokinetic muscle strength measurement equipment was used to measure muscle strength during shoulder lateral rotation. The subjects performed lateral rotation of the shoulder in three different forearm postures (neutral, supine, prone) to measure shoulder muscle activity and lateral rotation strength. Results: The independent activity ratio (% Isolation) of the supraspinatus and infraspinatus muscles during lateral rotation of the shoulder joint demonstrated a significant difference (p<0.05) according to the change in forearm posture. Conclusion: The supraspinatus muscle showed independent activity ranging from highest to lowest in the order of pronation, neutral, and supination of the forearm, while the independent activity of the infraspinatus muscle ranged from highest to lowest in the order of neutral, supination, and pronation of the forearm. Therefore, the most active forearm positions for the supraspinatus and infraspinatus muscles are pronation and neutral, respectively.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.143-153
• /
• 2014

Objective: The aim of this study is to investigate the effects of trunk-forearm supported sitting on trunk flexion angle, trunk extensor fatigue and seat contact pressure. Background: The relationship between sitting posture and musculoskeletal disorders of the trunk extensor fatigue and seat contact pressure has been documented. The trunk-forearm support type ergonomic chair was devised from the fact that trunk-forearm support has been reported to reduce trunk extensor activity and discomfort. Method: Using three different sitting postures, upright ($P_1$), trunk-forearm supported ($P_2$) and normal sitting ($P_3$), six healthy subjects participated in the study. Motion capture system was used to collect head and trunk flexion angle, and surface electromyography (sEMG) was used to collect myoelectric signal of upper trapezius, lower trapezius, erector spinae, multifidus, and pressure mat system was used to measure seat contact pressure. Results: When trunk and forearm were supported by the ergonomic chair, higher head flexion angle showed upright > trunk-forearm supported > normal in order, and muscle fatigue showed less than upright and normal sitting. Mean seat contact pressure decreased 19% than upright sitting. But muscle fatigue was not affected by each condition. Conclusion: Trunk-forearm supported sitting of the ergonomic chair showed positive effect in respect of trunk and head flexion angle, trunk extensor fatigue, seat contact pressure. To acquire comprehensive understanding of the effectiveness of the ergonomic chair, further studies such as anatomical effects from measurement of external applied loading effect to the body from interface pressure analysis are required. Application: The results of the publishing trend analysis might help physiological effects of trunk-forearm support type chair.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.73-83
• /
• 1997

It is improtant to get accurate information about the grip strength for designing ergonomic grips and handles. It has been known that the excessive and repetitive use of grip force and unnatural posture of the wrist may cause cumulative trauma disorders (CTDs) such as carpal tunnel syndrome, tendrome, tendonitis, DeQuervan's disease, etc. In this paper we have measured the grip strength for sitting and standing posture for Korean adults ; 114 males and 105 females aged from the 20's to above the 50's. And this paper performed statistical analysis for deriving characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum grip strength posture is exerted under standing posture with the elbow in full extension (180 .deg. ) for both males and females (2) There is significant difference among posture, sex and right and/or left handedness (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has corre- lations with the age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist, and breadth of wrist for males.

• Proceedings of the ESK Conference
• /
• 1996.10a
• /
• pp.238-243
• /
• 1996

Grip strength is a very important basic data for ergonomic design of hand tools, grips, handles and etc.. Excessive grip strength is contineously exerted to handle the machines or tools, it might cause a musculoskeletal disorder such as cumulative trauma disorders. Capal tunnel syndrome is a typical nerve disorder anomg CTDs. In this paper we have measured the grip strength under sitting and standing posture for Korean adults ; 113 male and 105 female aged from 20' to the above 50' . And this paper performed statistical analysis for driving out characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum girp strength is exerted under standing posture with the elbow in full extension(180 .deg. ) for both of male and female (2) There is significant difference in posture, sex and right left hand (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has a correlation with age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist and breadth of wrist for male

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.265-272
• /
• 2001

The human arm is modeled by three rigid bodies(the upper arm, the forearm and the hand)with seven degree of freedom(three in the shoulder, two in the elbow and two in the wrist). The objective of this work is to present a method to determine the three-dimensional kinematics of the human elbow joint using a magnetic tracking device. Euler angle were used to determine the elbow flexion-extension, and the pronation-supination. The elbow motion for the various driving conditions is measured through the driving test using a simulator. Discomfort levels of elbow joint motions were obtained as discomfort functions, which were based on subjects' perceived discomfort level estimated by magnitude estimation. The results showed that the discomfort posture of elbow joint motions occurred in the driving motion.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.36-49
• /
• 1998

The purpose of this study is to investigate the relationship between the work postures and upper extremity cumulative trauma disorders(CTDs) in female medical insurance bill reviewers(n=448). This study included diagnosis for CTDs, anthropometry and job analysis (workstations and posture). The characteristics of subject were 33.6 years of average age and 8.7 years of average work duration. The results were as fallows. Ergonomic conditions of workstation were unsuitable compared with anthropometry result. The height of work surface(79.5 cm) and chair(43.0 cm)were high. work space was small, and legs space under the table was limited. Work postures were awkward compared with recommended neutral postures. Neck flexion($21.0-36.0^{\circ}$), elbow elevation, shoulder abduction ($46.0-47.0^{\circ}$). wrist radial and ulnar deviation, forearm supination and pronation, and wrist repeated motion(12.7-21.5 freq./min) were analyzed as hazardous risk factors by job analysis. The prevalence of CTDs was 32.8 % by medical diagnosis. The prevalence rate of CTDs in hazardous work posture group was significantly greater than safe work posture group both neck-shoulder (relative prevalence = 5.2, p<0.001) and wrist-hand (relative prevalence = 2.5, p<0.05).